❌

Normal view

Using seismic stations to track groundwater resources

28 September 2026 at 12:00

In March 2023, Southern California experienced heavy storms after almost 20 years of drought. Sixteen of these came from long, narrow regions of concentrated water vapor moving through the air, known as atmospheric rivers. During droughts, groundwater supplies up to 60% of the total water to the Greater Los Angeles area, so researchers think that stormwater from the 2023 events could have recharged groundwater reserves for future use. However, scientists lack adequate tools to assess how much groundwater is in the subsurface.

To overcome this challenge, researchers from California and Texas developed a new method to study deep groundwater. California gets a large number of earthquakes, so it has over 450 stations around the state to monitor the associated vibrations, referred to as seismic waves. To study how much the 2023 storm recharged the groundwater in the Greater Los Angeles area, the team used a tool called seismic-DI, which employs these seismic waves to estimate how much groundwater is stored at different depths. 

Seismic-DI works by measuring how fast seismic waves move through the Earth, known as their seismic velocity. The researchers explained that the Greater Los Angeles area is a very crowded city, so it produces an abundance of seismic waves. They measured changes in the seismic velocities of these underground waves to see where the groundwater is full of water, or saturated, versus partially full, or unsaturated. They used 20 years of these data to produce graphs that record changes in groundwater storage at different depths, known as hydrographs.

To validate the accuracy of seismic-DI, the researchers also compared their seismic hydrographs with groundwater thickness data from a NASA mission known as the Gravity Recovery and Climate Experiment, or GRACE. GRACE consists of 2 satellites that measure changes in Earth’s gravity, which reflect surface water and groundwater storage. Both their seismic hydrographs and the GRACE groundwater data demonstrated that the Greater Los Angeles region experienced an increase in groundwater storage from stormwater in the winter, and a reduction in groundwater storage during the dry summer. 

The team’s hydrographs showed that the 2023 storms saturated the Greater Los Angeles area groundwater down to 35 meters (114 feet), but it was abnormally dry at 200 meters (656 feet), and at a severe drought at 450 meters (1,476 feet). The GRACE data similarly demonstrated that the subsurface is in severe drought. Combined, these data indicated the 2023 storms helped the Greater Los Angeles area recover up to 90% of its groundwater at depths of 50 meters (164 feet) since the 2006-2022 drought. However, it recovered only about 40% at 75 meters (246 feet) and 20% to 30% at 100 meters (328 feet).

They concluded that the 2023 atmospheric river events recharged only shallow groundwater reserves in the Los Angeles area. As a result, they suggested future researchers consider deep groundwater reserves for a more complete assessment of total regional water deficits. While this study demonstrated that seismic-DI can successfully reveal spatial changes in groundwater and drought at depth, the team acknowledged that contributing factors like the amount, rate, and spatial variability of groundwater reserves remain targets of future work. 

The post Using seismic stations to track groundwater resources appeared first on Sciworthy.

Bedrock fractures shape waterfalls

17 September 2026 at 12:00

Waterfalls play an essential role in river development and landscape evolution. Researchers are particularly interested in how abrupt changes in the steepness of a river channel, also called knickpoints, develop. Knickpoints vary in size and can be as small as your index finger or as large as Niagara Falls. Researchers from Virginia hypothesized that waterfalls, a type of knickpoint, can influence erosion when a river channel is cut into solid rock, called bedrock. 

The researchers wondered whether fractures and other pre-existing weaknesses can influence how water removes rock slabs from a river channel, via an erosional process called plucking. Fractures can form in many different orientations, but the researchers focused on 3. Imagine a flat tabletop that represents a riverbed. Fractures that are parallel to the flat tabletop are called horizontal fractures. If you tip the table so the low end points downstream, that’s the direction of downstream-dipping fractures. If you tip the table so the low end points upstream, that’s the direction of upstream-dipping fractures. 

First, the researchers tested how fracture orientation changed erosion before an established knickpoint. They used a man-made channel, called a flume, to simulate a natural river system. To set up the experiment, they glued layers of small tiles about the size of an adult’s thumbnail to a plastic frame and put it in the flume. Then, they placed a layer of unglued tiles upstream of the knickpoint. 

To begin the experiment, the researchers incrementally increased the amount of water flowing through the flume every 5 minutes until they reached a maximum flow or all the loose tiles were “eroded.” They considered a tile to be “eroded” once it was transported over the knickpoint and downstream. The researchers measured the water depth at a fixed point upstream of the knickpoint, the number of tiles eroded through plucking, and the volume of water. They repeated this 8 times for each fracture orientation.

The team found differences in the amount and timing of erosion between the 3 orientations. In particular, they saw that erosion began at lower water speeds for horizontal beds than for tilted beds. Based on the observed erosion rates, they concluded that horizontal beds are the most susceptible to erosion, while upstream-dipping beds are the most resistant, and downstream-dipping beds fall between the 2. 

The researchers then tested how a knickpoint would develop and influence water flow if all of the tiles were unglued and free to move. They individually stacked almost 5,000 unglued tiles across the channel. Before starting the experiment, they filled the flume slowly with water to submerge all of the tiles without moving them. Then, they increased the water’s speed to start erosion. Instead of collecting measurements as they did in the first experiment, the researchers filmed this experiment and observed how the knickpoint shape changed and how plucking occurred. 

The researchers observed that the plucked tiles in this experiment formed piles downstream of the knickpoint in a process known as armoring. This armor of tiles, which represents loose rocks near a waterfall in a natural setting, prevents erosion of the underlying river bed. Only when the water transports the armor downstream can it erode the bedrock and develop a knickpoint.

Unlike the first experiment, researchers found no differences in erosion between fracture orientations in this experiment, but did observe differences in armoring. They found that upstream-dipping beds had the least armoring because water quickly transported piles of tiles near the waterfall downstream. Downstream-dipping beds had the most armoring, and their eroded tiles took longer to move downstream. 

The team concluded that waterfalls will erode at different rates based on their fracture orientation and armoring processes. The orientation of bedrock fractures also impacts the shape of the waterfall and the river channel around it. So the next time you see a large waterfall, consider that it may have started as a small fracture the size of your thumbnail.

The post Bedrock fractures shape waterfalls appeared first on Sciworthy.

Solo dev enables running CUDA on AMD hardware in Windows, getting multiple CUDA libraries running on a gaming Radeon RX 9060 XT GPU in Windows — CUDA-exclusive workloads on AMD hardware in Windows possible without virtualization or dual-booting

14 September 2026 at 15:23

With the latest ROCm updates, AMD finally brought robust, official PyTorch and HIP SDK support to Windows for consumer GPUs, fully supporting the Radeon RX 7000 and the RX 9000 series. For native, supported frameworks, AMD on Windows is finally a viable reality, but what happens when you want to run a proprietary application, an older repository, or a specialized AI tool that absolutely refuses to support anything but NVIDIA's CUDA? That's where a new project, Speedstu's "CUDA-for-AMD-Windows," could save the day. It proves that running rigidly CUDA-exclusive workloads on AMD hardware in Windows is possible without virtualization or dual-booting.

To be clear, this project is not a brand-new runtime. Instead, it is a highly automated and reproducible PowerShell setup that bridges the gap between ZLUDA, the well-known, formerly AMD-funded translation layer, and AMD's native HIP/ROCm SDK for Windows. Through a series of clever scripts, the toolkit automatically detects the user's GPU architecture, grabs a specifically pinned version of ZLUDA (v6-preview.69), and, at least in theory, seamlessly maps it to the ROCm math libraries already present in Windows.

A screenshot of the CUDA for AMD Windows GitHub documentation.

Several important CUDA libraries link up, but the important cuDNN doesn't work yet. (Image credit: Speedstu/GitHub)

The result is that the developer successfully intercepted and mapped the CUDA driver API as well as the cuBLAS, cuSPARSE, and cuFFT libraries directly over to their AMD equivalents. As a proof-of-concept, the author even trained a 2.2-million-parameter PPO reinforcement-learning network end-to-end using unmodified CUDA libraries on an AMD Radeon RX 9060 XT, which happens to be the only officially supported GPU at this time.

Even with AMD's official ROCm support on Windows, the local developer community frequently runs into dependency hell when trying out experimental GitHub repos or specialized AI tools that hardcode CUDA as a requirement. For developers who want to experiment with these CUDA-only tools natively on their Windows daily driver machines without dealing with WSL2 passthrough issues or waiting for the original author to write a HIP port, this project offers a highly desirable translation pipeline. It acts as a sort of hacky adapter for software that stubbornly demands an NVIDIA card.

Benchmark testing included in the project's documentation offers some interesting findings. In a controlled A/B test running a 2.2M-parameter reinforcement learning workload on a Radeon RX 9060 XT, the "public upstream path," which relies purely on official ZLUDA releases and AMD's stock HIP SDK 6.4, achieved a median throughput of 13,278 steps per second (SPS). By contrast, an optional "recovered custom overlay" apparently built from salvaged legacy ZLUDA binaries ran slightly worse at 12,876 SPS, making it roughly 3% slower. While the clean official setup is faster, the author notes that "a later rewrite removed LibTorch/ZLUDA from PPO and achieved substantially higher throughput," indicating that there is still a performance hit for this stack of translators.

CUDA for AMD Windows Official benchmarks (BENCHMARKS.md)

Metric

Public upstream

Recovered custom

Custom delta

Overall SPS, median

13,278.46

12,875.80

-3.03%

Overall SPS, mean

13,172.49

12,649.83

-3.97%

Collection SPS, median

63,306.00

59,360.67

-6.23%

Consumption SPS, median

16,806.36

16,445.66

-2.15%

Inference time, median

0.5863 s

0.6293 s

+7.33%

PPO learn time, median

3.2076 s

3.2958 s

+2.75%

Now, before anyone declares the CUDA moat officially drained, it is crucial to set realistic expectations. First, this is a solo open-source project, not an enterprise-grade solution. The author is extremely transparent about its narrow scope, as crucial machine learning libraries like cuDNN, TensorRT, and NCCL do not resolve yet. This means compatibility is strictly workload-dependent; if your specific AI tool relies heavily on cuDNN, this setup will fail. Furthermore, it's worth pointing out that ZLUDA itself is currently being maintained as a "weekend hobby project" after losing its commercial backing a second time. Relying on this pipeline for production-level work remains a massive risk. This repository is a tinkerer's tool, not a corporate IT deployment strategy.

Despite these limitations, "CUDA-for-AMD-Windows" is pretty exciting, as it proves that the barrier to entry for running CUDA-exclusive software on AMD GPUs isn't an insurmountable hardware flaw, but a relatively tractable translation tooling problem. Because the project is entirely open-source, its potential extends far beyond this initial proof-of-concept. With community contributions, we could see expanded hardware detection and clever patches to get more stubborn CUDA libraries resolving properly.

Open-Ear Earphones With Bluetooth 6.0: 14mm Drivers, Battery Life and Everyday Use

11 September 2026 at 02:25

As wireless earbuds continue to get smaller, comfort and awareness of your surroundings can become just as important as compact size. The Zombies Cat B22 takes a different route with an open-ear earclip design that rests around the ear instead of blocking the ear canal. Combined with Bluetooth 6.0 and large 14mm drivers, the B22 is designed for users who want wireless audio while staying more connected to their surroundings during everyday activities and workouts.

That design is paired with Bluetooth 6.0, 14mm dynamic drivers, claimed 720° panoramic sound, a built-in microphone, and a small warm-colored safety light. Instead of trying to compete purely on conventional earbuds specifications, the B22 is designed around the idea of keeping music available while maintaining a more open connection with the surrounding environment.

According to the Banggood listing, the B22 supports Bluetooth 6.0, uses 14mm speakers, offers up to 4.5 hours of playback from the earbuds themselves and up to 20 hours when combined with the charging case.

The B22’s biggest idea is its open-ear design

The most interesting part of the Zombies Cat B22 is not actually Bluetooth 6.0. It is the way the earphones are worn.

Rather than pushing an earbud into the ear canal, the B22 uses an earclip-style open-ear structure. This can be appealing to people who dislike the plugged-in sensation of traditional in-ear headphones or want to remain more aware of their surroundings while listening.

That makes the B22 sports headphones particularly relevant to walking, commuting, cycling and other situations where completely isolating yourself from environmental sound may not be desirable.

It also changes the way the headphones should be evaluated. The goal is not simply maximum isolation. Instead, the B22 is built around a balance between personal audio and environmental awareness.

14mm drivers give the B22 a larger audio foundation

Inside the compact earphones are 14mm dynamic drivers.

A larger driver does not automatically guarantee better sound, but it gives the B22 a substantial hardware foundation for producing bass, vocals and higher-frequency details. For an open-ear design, that can be particularly important because there is no sealed ear canal to create the same acoustic conditions as conventional in-ear headphones.

The product listing describes the 14mm drivers as being designed for a broad soundstage with stronger bass and clear treble.

The stated frequency response is 20Hz–20kHz, covering the commonly specified range for consumer headphones.

What does “720° surround sound” mean here?

The B22 also promotes 720° panoramic sound, which is one of its more unusual specifications.

This should be understood as a spatial-audio presentation rather than literally having sound physically travel in every direction around the listener. The idea is to create a wider and more immersive sense of positioning than conventional stereo playback.

That could make movies, games and music feel more spacious, although the real-world effect will depend on the recording, device and listening environment.

For buyers, the more meaningful takeaway is that Zombies Cat is positioning the B22 as an immersive open-ear headphone, rather than a basic wireless sports earbud.

Bluetooth 6.0 focuses on connection and responsiveness

The B22 uses Bluetooth 6.0 and supports HSP, HFP, A2DP and AVRCP profiles. The listed transmission distance is up to 10 meters.

For everyday users, the important part is less about the Bluetooth version number itself and more about how the headphones fit into daily use.

Bluetooth 6.0 is intended to provide a modern wireless connection, while the supported profiles cover common functions such as music playback, hands-free communication and remote media control.

The listing also highlights low latency for gaming and video. That makes the B22 potentially more versatile than headphones designed exclusively for music listening, although actual latency can vary depending on the connected phone, computer or game system.

The built-in warm light is more than decoration

One of the B22’s most distinctive physical features is its integrated warm safety light.

The light is positioned as a visibility feature for activities such as night running and cycling. Rather than functioning purely as an RGB-style visual effect, the concept is to make the wearer easier to notice in darker surroundings.

This is a clever addition because open-ear headphones are already aimed at active users. A small visibility feature gives the design another practical purpose.

However, the light should be considered an additional visibility aid rather than a replacement for proper cycling or running safety equipment.

Battery life is designed around shorter daily sessions

The B22 uses a 40mAh battery in each earphone and a 300mAh charging case.

Banggood lists approximately 4.5 hours of playback from the earbuds alone and up to 20 hours with the charging case. Charging the case and earbuds is listed at around one hour.

That makes the B22 better suited to several shorter listening sessions than extremely long continuous use.

For example, a commute, workout, walk or evening gaming session can fit comfortably within the stated earbud runtime. Once the earbuds are returned to the case, the additional battery capacity extends the overall listening time.

As always, actual runtime can vary with volume, connection conditions and other usage factors.

The earclip format makes the B22 a sports-oriented headphone

The B22 weighs approximately 43 grams as listed for the product, with dimensions of 60 × 28 × 52mm.

Its physical design is clearly aimed at people who want something different from conventional TWS earbuds.

The earclip structure avoids the need for a traditional silicone ear tip, while the open-ear configuration can make the headphones more suitable for users who prefer a less enclosed listening experience.

That said, fit is highly personal. An earclip that feels secure for one person may not feel identical for another, so the B22’s design should be viewed as an alternative to conventional earbuds rather than a universal replacement.

A microphone makes it useful beyond music

The B22 includes a built-in microphone and supports the standard Bluetooth calling profiles listed by Banggood.

This means the headphones can also be used for calls and voice communication rather than functioning only as a music player.

For people who frequently switch between podcasts, music, phone calls and video content, that makes the B22 a more practical everyday accessory.

Who should consider the Zombies Cat B22?

The B22 makes the most sense for users who specifically want an open-ear Bluetooth headphone rather than a conventional sealed earbud.

It could be particularly interesting for:

  • Runners and walkers who prefer an open listening style
  • Cyclists looking for headphones with an additional visibility feature
  • Commuters who dislike the pressure of in-ear tips
  • Users who want larger drivers in an open-ear design
  • People interested in Bluetooth 6.0 headphones
  • Gamers and video viewers looking for a more spacious audio presentation

It may be less suitable for someone whose first priority is strong passive isolation or deep noise blocking, because the open-ear concept is fundamentally designed around a different listening experience.

Zombies Cat B22 specifications

Feature Zombies Cat B22
Wearing style Open-ear earclip
Bluetooth Bluetooth 6.0
Driver 14mm dynamic driver
Frequency response 20Hz–20kHz
Claimed audio feature 720° panoramic sound
Bluetooth profiles HSP / HFP / A2DP / AVRCP
Transmission distance Up to 10m
Earbud battery 40mAh
Charging case 300mAh
Earbud playback Up to 4.5 hours
Total playback with case Up to 20 hours
Charging time About 1 hour
Microphone Yes
Product weight About 43g
Product dimensions 60 × 28 × 52mm
Colors Black, Red, Beige

The specifications above are based on the product information currently published by Banggood.

Final thoughts

Zombies Cat B22 earphone is interesting because it does not try to be another ordinary pair of TWS earbuds.

Its combination of an open-ear earclip structure, 14mm dynamic drivers, Bluetooth 6.0 and built-in warm safety lighting gives it a clearly defined identity. The claimed 720° panoramic sound is another attempt to make the listening experience more immersive without returning to a conventional closed-in design.

The real appeal of the Zombies Cat B22 is not simply its specifications, but the way its open-ear design fits into everyday listening. By leaving the ear canal open, the B22 can be a useful alternative for running, commuting, walking or casual listening when staying aware of nearby sounds is important. For users who prefer a less isolated listening experience than traditional in-ear earbuds provide, the B22 offers a distinctive combination of comfort, situational awareness and wireless convenience.

The post Open-Ear Earphones With Bluetooth 6.0: 14mm Drivers, Battery Life and Everyday Use appeared first on IGeeKphone China Phone, Tablet PC, VR, RC Drone News, Reviews.

Choking Global Trade

10 September 2026 at 20:15
Low rainfall and shrinking rivers are causing shipping bottlenecks, and higher prices, around the world.

© Ina Fassbender/Agence France-Presse — Getty Images

The Rhine River near Düsseldorf, Germany, last month.

DCLK1 drives fibroblast activation and lung fibrosis via Smad3 binding

10 September 2026 at 13:41

Idiopathic pulmonary fibrosis, a relentlessly progressive and fatal scarring disease of the lungs, has long frustrated clinicians with only two approved drugs that slow but cannot reverse its course. Now, a team of researchers in Taiwan has identified a surprising new player in the disease’s destructive machinery: doublecortin-like kinase 1, or DCLK1, a kinase better known for its role in cancer stem cells. Their study, published in the Journal of Biomedical Science, demonstrates that DCLK1 drives fibroblast activation in the lung and that blocking it—either genetically or with an oral inhibitor—slows fibrosis and preserves lung function in mice. The findings position DCLK1 as a promising therapeutic target in one of medicine’s most stubborn diseases.

The research, led by Lee-Yuan Lin, Wun-Hao Cheng, Chien-Huang Lin and Bing-Chang Chen of Taipei Medical University, together with collaborators at National Taiwan University Hospital and Universitas Gadjah Mada, began with a question that has lingered in the literature. Gene expression analyses had previously hinted that DCLK1 might be implicated in IPF, and earlier work reported that the kinase is markedly enhanced in the alveolar epithelial cells of patients with pulmonary fibrosis and in mice with bleomycin-induced fibrosis. But its function in fibroblast activation—the cellular engine of fibrosis—had remained unexplained.

To begin untangling that role, the team mined a publicly available single-cell RNA sequencing data set containing more than 312,000 cells from healthy lungs, IPF lungs, and lungs with chronic obstructive pulmonary disease. After stringent quality control filtering, they focused on roughly 240,000 cells from the control and IPF groups and mapped DCLK1 expression across the major lung cell lineages: epithelial, endothelial, lymphoid, myeloid, and stromal cells. The signal was unmistakable. DCLK1 was expressed across many cell populations, but the highest expression appeared in the stromal compartment, particularly in myofibroblasts—the specialized, contractile fibroblasts that churn out the extracellular matrix and stiffen lung tissue in IPF.

Human tissue told the same story. The researchers examined lung samples from eleven patients with IPF, obtained during lung transplantation or surgery, alongside fourteen nonfibrotic control samples. Histological staining with hematoxylin and eosin and Masson trichrome confirmed the expected picture of interstitial consolidation and collagen deposition in the IPF specimens. More importantly, immunohistochemistry revealed that both total DCLK1 and its phosphorylated, activated form were significantly upregulated in the fibrotic lung interstitium compared with control tissue. DCLK1, in other words, was not merely present in scarred lungs—it was switched on.

DCLK1 is an intriguing molecule to find at the center of a fibrotic process. It is a serine/threonine kinase belonging to the calcium/calmodulin-dependent kinase family, distinguished by two microtubule-binding domains. In oncology, DCLK1 overexpression has been documented in colorectal, pancreatic, gastric, renal, and hepatocellular carcinomas, where it correlates with poor prognosis, high recurrence, and metastasis, promoting tumor initiation and the epithelial–mesenchymal transition in cancer stem cells. It has also been linked to inflammatory signaling in SARS-CoV-2 infection, where inhibiting it blocks proinflammatory caspase-1/interleukin-1β signaling. The new study extends this portfolio of mischief to the fibrotic lung.

To test causality rather than mere correlation, the researchers turned to mice. They crossed animals carrying loxP sites flanking exon 3 of the DCLK1 locus with Pgk1-RFP-Cre/ERT2 transgenic mice, generating a system in which tamoxifen administration triggers global deletion of the Dclk1 gene. When these DCLK1 knockout mice and littermate controls were given intratracheal bleomycin, a chemotherapy drug used to induce pulmonary fibrosis in laboratory animals, the difference was striking. Knockout mice showed far less lung infiltration and collagen deposition, reduced numbers of cells staining positive for DCLK1 together with fibroblast surface protein and alpha-smooth muscle actin, and significantly lower levels of the profibrotic proteins fibronectin, α-SMA, and connective tissue growth factor, or CTGF.

The protective effect extended well beyond molecular markers. Using the FlexiVent FX system to measure lung mechanics, the team found that bleomycin treatment significantly reduced respiratory system compliance and pressure–volume performance and increased the normalized work of breathing in control mice—hallmarks of a stiffening, fibrotic lung. In the DCLK1 knockout animals, these functional deficits were substantially attenuated. In vivo microcomputed tomography, acquired at 34.75-micrometer voxel resolution, painted the morphological counterpart: bleomycin caused parenchymal destruction and volume loss in control lungs, while knockout mice retained lung structure and volume. Density histograms shifted toward fibrotic tissue in wild-type animals but stayed largely preserved in the knockouts, and peripheral blood neutrophil percentages, which climbed after bleomycin injury, were significantly reduced in the knockout group.

With the in vivo evidence established, the investigators dissected the molecular wiring in cultured normal human lung fibroblasts. Transforming growth factor beta, the master profibrotic cytokine, induced DCLK1 phosphorylation within 30 minutes and DCLK1 expression within 8 hours. Chromatin immunoprecipitation assays showed that after TGF-β stimulation, both Smad3—the canonical transcriptional mediator of TGF-β signaling—and the nuclear factor kappa B subunit p65 enriched at the DCLK1 promoter, indicating that TGF-β switches on DCLK1 through both Smad-dependent and noncanonical NF-κB pathways. Silencing DCLK1 with small interfering RNA then blunted the fibroblast’s profibrotic response, reducing TGF-β-induced expression of fibronectin, collagen 1A1, α-SMA, and CTGF.

The pathway, however, does not stop there. The team found that TGF-β also phosphorylated Akt, and that transfecting fibroblasts with a dominant-negative Akt construct reduced TGF-β-induced DCLK1 phosphorylation and the expression of fibronectin and CTGF—placing Akt upstream of DCLK1. Downstream, DCLK1 knockdown reduced Smad3 phosphorylation while DCLK1 overexpression enhanced it. Coimmunoprecipitation revealed a physical association between DCLK1 and Smad3, and immunofluorescence microscopy showed the two proteins colocalizing in the nucleus within 30 minutes of TGF-β treatment. A ChIP assay using a DCLK1 antibody pulled down DNA from the Smad3-binding region of the CTGF promoter, and pretreatment with the selective DCLK1 inhibitor DCLK1-IN-1 reduced TGF-β-induced CTGF expression. Together, the results sketch an Akt/DCLK1/Smad3 axis through which TGF-β drives the production of connective tissue growth factor, a potent profibrotic mediator.

The clinical payoff came in the pharmacological arm of the study. Mice receiving oral DCLK1-IN-1 at 10 milligrams per kilogram daily, beginning on day 7 after bleomycin instillation and continuing until day 28, showed visibly reduced fibrotic progression on histology, lower expression of fibronectin, α-SMA, and CTGF in lung tissue and lysates, preserved pulmonary compliance, improved pressure–volume loops, and reduced work of breathing. Serial microCT scans on days 7, 17, and 27 documented less severe fibrotic remodeling in the treated animals, with lung attenuation histograms showing a smaller fraction of dense, nonaerated voxels. Blood neutrophil counts were also lower. In short, a pill-like oral inhibitor measurably slowed the disease in a model that mirrors the human condition.

The implications are significant because the current therapeutic landscape for IPF is so thin. Only nintedanib, a tyrosine kinase inhibitor targeting growth factor receptors, and pirfenidone, which suppresses TGF-β production and activity, are approved by the US Food and Drug Administration, and both merely slow progression. The recent failure of pamrevlumab, a monoclonal antibody against CTGF, in the phase 3 ZEPHYRUS-1 trial suggested that targeting downstream fibrotic end products alone may be insufficient—pointing to the value of upstream signaling regulators such as DCLK1. Adding to the appeal, a DCLK1 inhibitor has already been shown to prevent inflammatory responses in acute lung injury, hinting at dual anti-fibrotic and anti-inflammatory potential.

The authors are careful to note limitations. DCLK1 is expressed across multiple lung cell types, and the tamoxifen-inducible knockout used here was global rather than cell-type-specific, so the contributions of fibroblasts versus epithelial, endothelial, and immune cells could not be fully separated. Human control tissue, as in most fibrosis studies, came from heterogeneous sources, including tumor-adjacent lung. The precise subcellular mechanics of the DCLK1–Smad3 interaction, whether DCLK1 inhibition can promote fibrosis resolution rather than merely slow progression, and the systemic safety of long-term DCLK1 blockade—all relevant given the kinase’s role in cancer and other processes—remain open questions.

Even so, the convergence of evidence is striking: DCLK1 is upregulated in human IPF, amplified in experimental fibrosis, mechanistically coupled to the TGF-β–Smad3 engine of fibroblast activation, and its suppression by both genetics and a small molecule preserves lung structure and function. What began as a cancer stem cell marker has now emerged, unexpectedly, as a central node in the scarring of the lung—offering fresh hope that a disease long considered irreversible may one day be stopped at its molecular source.

Subject of Research: Medicine

Article Title: DCLK1 drives fibroblast activation and lung fibrosis via Smad3 binding

Article References: Lin, L.-Y., Cheng, W.-H., Wu, Y.-C., Wen, H.-C., Hsu, H.-H., Liu, C.-H., Chen, J.-Y., Chang, W.-S., Wu, Y.-J., Wu, J.-S., Yuliani, F. S., Wang, C.-Y., Lin, C.-H., & Chen, B.-C. (2026). Doublecortin-like kinase 1 promotes fibroblast activation and fibrotic progression through Smad3 binding in idiopathic pulmonary fibrosis. Journal of Biomedical Science, 33(1), Article 52. https://doi.org/10.1186/s12929-026-01258-7

Image Credits: AI Generated

DOI: 10.1186/s12929-026-01258-7

Keywords: DCLK1 and cancer stem cell pathways in fibrosis, DCLK1 kinase in lung disease, fibroblast activation mechanisms in IPF, fibroblast-driven lung scarring, genetic suppression of DCLK1 in fibrosis models, lung fibroblast activation, lung fibrosis progression and molecular drivers, oral DCLK1 inhibitors for pulmonary fibrosis, pulmonary fibrosis, role of DCLK1 in lung tissue remodeling, Smad3 signaling pathway in fibrosis, therapeutic targeting of DCLK1

Wildfires and forest harvesting worsen severe weather impacts

17 August 2026 at 12:00

Have you ever experienced a severe weather event, like a hurricane or a tornado? Researchers have shown that climate change is causing such weather events to become more extreme and more frequent, destroying communities and infrastructure. To determine which areas are most at risk, researchers from Canada studied the environmental effects of a powerful flooding event that occurred in southwestern British Columbia (BC) in November 2021. 

They focused on a type of severe flooding event that is characteristic of the North American Pacific coastal region, called an atmospheric river. An atmospheric river occurs when a long, narrow vapor cloud flows toward land from the Pacific Ocean, causing heavy rainstorms. In November 2021, an atmospheric river in southwestern BC destroyed numerous regional highways, pipelines, power lines, and railways within its path. Over 18,000 people were evacuated due to flooding, and 6 people died. 

The team explained that before the storm, BC experienced a severe drought and an unprecedented heatwave, followed by widespread thunderstorm activity. In 2021, lightning and human activity caused nearly 1,000 wildfires, which led to the third-worst wildfire season ever recorded in BC, partially because trees grow back slowly in forests that have been cut down or harvested. Poor vegetation recovery makes harvested forests more vulnerable to wildfires than old-growth forests. The November atmospheric river occurred shortly after this wildfire season. 

To determine how the atmospheric river impacted southwestern BC, the researchers analyzed approximately 70,000 square kilometers (27,027 square miles) of affected area. They compared satellite images of southwestern BC from Google Earth, Sentinel, and Landsat taken before and after the event to detect changes in river channels and identify geohazards, like landslides and debris flows. They also used satellite images and Canadian government data to identify which forests had been harvested within the study area. The researchers then traversed the area to confirm their remote analyses. 

The researchers used a type of 3D remote sensing, called light detection and ranging, or lidar, to measure how the 2021 atmospheric river redistributed sediment in the Coquihalla and Coldwater River valleys. With the help of lidar, the researchers discovered that both rivers had severely unstable banks due to erosion from the flooding event. Along the Coquihalla River, approximately 53,000 cubic meters (1,871,677 cubic feet) of sediment were eroded, while nearly 50,000 cubic meters (1,765,733 cubic feet) of sediment were eroded along the Coldwater River. 

The researchers also found that hillslope geohazards increased the volume of sediment in both rivers. And in some cases, upstream areas with a history of forest harvesting and wildfires also affected stable banks downstream. For example, they identified debris flows on an unstable hillslope that triggered a landslide on a riverbank downstream. They observed that the river and stream channels shifted due to a sudden addition of sediment from hillslope geohazards and floodwater during the event.

In total, the researchers documented over 1,300 geohazards along 47 kilometers (about 30 miles) of the Coquihalla River and 19 kilometers (about 12 miles) of the Coldwater River and nearby creeks. Nearly half of the geohazards originated in an area with a history of wildfires or forest harvesting. Of the 155 geohazards at the Coquilhalla River, 43% occurred below forest harvesting resource roads, and of the 117 geohazards observed at the Coldwater River, 29% originated in areas with past wildfires.

The researchers suggested that their findings could help scientists predict where severe geohazards will occur during extreme weather events, since both watersheds had geohazards originating in harvested forests. Before 2000, clear-cutting was a widespread practice in BC, and the team’s results demonstrate that unsustainable harvesting practices like this can have lasting environmental impacts.

The researchers concluded that both forest harvesting and wildfires contributed to the severe impacts of the November 2021 atmospheric river, causing catastrophic landslides and debris flows to occur in traditionally dry regions. They suggested that more accurate risk assessments can better equip communities for severe weather events like this. While the next atmospheric river that lands in the Pacific coastal region may be worse than the last, this study can inform scientists and communities about which areas it might affect most.

The post Wildfires and forest harvesting worsen severe weather impacts appeared first on Sciworthy.

Foxconn teria iniciado produção em massa dos iPhones “18 Pro” e “18 Pro Max”

22 July 2026 at 18:27

Segundo o que foi reportado por fontes de cadeia de suprimentos, a Foxconn já teria dado o pontapé inicial na produção em massa do “iPhone 18 Pro” e do “iPhone 18 Pro Max”, os próximos smartphones topos-de-linha da Apple.

A informação partiu do portal de notícias chinês MyDrivers, o qual afirmou que a principal fabricante contratada da Apple iniciaria em breve seu período de pico de contratações para dar conta desse estágio de aumento da produção em massa, já iniciado no mês de julho.

As novidades dos iPhones “18 Pro” incluem, segundo os rumores, uma redução de 35% no tamanho da Ilha Dinâmica (Dynamic Island), a implementação de uma lente com abertura variável no sensor principal de 48 megapixels — essa especulação, vale lembrar, ganhou força após a informação ser citada no vazamento da Tata Electronics, fornecedora indiana da Apple —, a estreia do chip “A20 Pro” (que poderá contar com novas tecnologias de encapsulamento) e do modem “C2” (que deverá ser compatível com redes 5G via satélite).

Pela primeira vez, a Apple deverá segregar o lançamento dos novos iPhones, separando os modelos tradicionais dos da linha Pro: tanto o “18 Pro” quanto o “18 Pro Max” deverão ser anunciados em setembro ao lado do “iPhone Ultra” — a estreia da Apple no segmento de celulares com telas dobráveis —, enquanto lançamentos como a segunda geração do iPhone Air, o “iPhone 18” e o “iPhone 18e” deverão ficar para o começo do ano que vem.

iPhone 17 Pro Max

Cores: prateado, laranja-cósmico ou azul-intenso
Armazenamento: 256GB, 512GB, 1TB ou 2TB
R$ 10.999,00
R$ 12.499,00

iPhone 17 Pro

Cores: prateado, laranja-cósmico ou azul-intenso
Armazenamento: 256GB, 512GB ou 1TB
R$ 9.777,77
R$ 11.499,00

NOTA DE TRANSPARÊNCIA: O MacMagazine recebe uma pequena comissão sobre vendas concluídas por meio de links deste post, mas você, como consumidor, não paga nada mais pelos produtos/serviços usando os nossos links de afiliado.

via MacRumors

New Invasion Drivers Define Oral Tumor Front

21 June 2026 at 01:55

In a groundbreaking advancement in the battle against oral squamous cell carcinoma (OSCC), researchers have identified novel molecular drivers that sculpt the invasive margins of these aggressive tumors. This insight, published recently in Cell Death Discovery, has the potential to radically redefine our understanding of tumor invasion dynamics and ultimately reshape therapeutic strategies aimed at curbing cancer spread.

Oral squamous cell carcinoma remains one of the most formidable malignancies affecting the head and neck region, notorious for its high rates of local invasion and eventual metastasis, which severely limit patient survival. The study, led by Flores, G., Uaroon, S., Garay, J.A.R., and colleagues, meticulously charts the cellular and molecular landscape at the leading edge of OSCC tumors—the so-called “tumor front”—where cancer cells adopt aggressive phenotypes to infiltrate neighboring tissues.

Prior research has predominantly focused on the bulk tumor mass, leaving the critical tumor front underexplored. By deploying cutting-edge techniques, including spatial transcriptomics and single-cell RNA sequencing, the team successfully delineated distinct subpopulations of tumor cells specialized in invasion. These cells exhibit unique gene expression profiles that confer enhanced motility, extracellular matrix remodeling abilities, and survival under hypoxic conditions, which are instrumental in their invasive behavior.

One of the study’s striking revelations is the identification of hitherto unrecognized molecular “invasion drivers”—key proteins and signaling pathways that orchestrate the repositioning of cancer cells at the tumor edge. Unlike traditional oncogenes that fuel uncontrolled proliferation, these invasion drivers specifically empower cancer cells to degrade surrounding tissue barriers and navigate through the extracellular matrix, effectively paving the way for tumor expansion.

The researchers highlight a set of transcription factors and matrix metalloproteinases (MMPs) that are upregulated exclusively at the tumor front. These molecules cooperate in a sophisticated manner to dismantle the structural integrity of the adjacent stroma, facilitating tumor cell dissemination. Intriguingly, the expression patterns of these invasion drivers appear to be tightly regulated by microenvironmental cues, such as gradients of oxygen and nutrient availability, underscoring the complex interplay between tumor cells and their immediate surroundings.

Moreover, this study challenges existing paradigms by demonstrating that the invasive phenotype is not merely a consequence of genetic mutations but involves dynamic phenotypic plasticity. Tumor cells can reversibly toggle between proliferative and invasive states depending on microenvironmental signals. Understanding these switches opens new avenues for therapeutic intervention aimed at trapping cells in a less aggressive state.

Therapeutically, this discovery offers a tantalizing prospect: by targeting the newly identified invasion drivers, future treatments could precisely inhibit the tumor front’s ability to invade without necessarily impeding the entire tumor mass’s growth. Such specificity could minimize collateral damage to healthy tissues and reduce systemic toxicity, a perpetual challenge in current cancer therapeutics.

From a diagnostic angle, the invasion drivers at the tumor front may serve as biomarkers for early detection of aggressive OSCC phenotypes. Their presence could inform clinicians about the tumor’s invasive potential, guiding personalized treatment plans that preemptively address metastatic risk.

The study also underscores the importance of the tumor microenvironment in modulating cancer progression. Fibroblasts, immune cells, and extracellular matrix components construct a niche that either restrains or facilitates invasion. By mapping these interactions, the researchers shed light on multifaceted host-tumor dialogues that dictate disease trajectory.

In addition to molecular profiling, advanced imaging modalities employed in the study revealed spatial organization patterns of invasive cells, showcasing intricate cellular neighborhoods at the tumor front. This spatial heterogeneity is a critical factor that must be considered when designing targeted therapies, as homogeneous treatment approaches may fail to fully neutralize invasive subsets.

The findings resonate beyond oral cancer, hinting that similar invasion mechanisms might be operative in other solid tumors, including breast, pancreatic, and colorectal cancers. Consequently, this research may spark a broader reconsideration of how tumors orchestrate local invasion across cancer types.

Despite the promise, translational hurdles remain. The identified invasion drivers require validation in clinical cohorts, and their druggability must be thoroughly assessed. Nevertheless, the study lays a rigorous foundational framework that accelerates the trajectory from bench to bedside.

Interdisciplinary collaboration was pivotal for this success, blending molecular biology, computational genomics, and clinical oncology. The study exemplifies how convergent technological advances empower researchers to decode tumor complexity with unprecedented resolution.

In conclusion, by unveiling the molecular architects of tumor invasion, this research marks a vital milestone in cancer biology. It paves the path toward innovative therapeutic strategies that precisely disrupt cancer cell migration at its inception, potentially transforming outcomes for patients afflicted with oral squamous cell carcinoma and beyond.

—

Subject of Research: Molecular drivers of tumor invasion in oral squamous cell carcinoma

Article Title: Newly identified invasion drivers define the tumor front in oral squamous cell carcinoma

Article References:
Flores, G., Uaroon, S., Garay, J.A.R. et al. Newly identified invasion drivers define the tumor front in oral squamous cell carcinoma. Cell Death Discov. (2026). https://doi.org/10.1038/s41420-026-03202-y

Image Credits: AI Generated

DOI: https://doi.org/10.1038/s41420-026-03202-y

How Satellite Technology Is Safeguarding the World’s Drinking Water

17 June 2026 at 19:25

Rivers serve as the lifeblood of our planet, weaving through landscapes and ecosystems while sustaining human civilizations. Despite their critical importance, many rivers remain under-studied, often due to the difficulties presented by their accessibility and variability. Small streams can be intermittent and unpredictable, sometimes disappearing for months or even years. This presents a formidable challenge for hydrologists and environmental scientists tasked with understanding these dynamic systems and their impact on water resources. Now, cutting-edge satellite remote sensing technology is revolutionizing how researchers monitor and analyze river health and water quality on a global scale.

Professor Dongmei Feng of the University of Cincinnati is at the forefront of this emerging discipline. Specializing in hydrological modeling and remote sensing, Feng recognizes that satellite data offers an unprecedented opportunity to observe rivers wherever they flow, even those in remote or inaccessible regions. Through spectral analysis of satellite imagery, scientists can detect changes in water quality and identify key pollutants, nutrients, and biological stressors that are difficult to measure through traditional fieldwork alone. This technology enables continuous and comprehensive monitoring, which is essential in managing freshwater resources sustainably.

The article recently published in Nature Water by Feng and her international collaborators underscores the importance of a holistic yet detailed approach to river science. By combining systematic review techniques with satellite-based observations, the researchers advocate studying rivers both individually and collectively. Each river exhibits a unique combination of climatic conditions, geographical features, and human impacts, which influence its health and quality. Understanding these nuances at multiple scales is crucial for predicting the rivers’ response to environmental pressures and human activities.

Rivers are not isolated entities; they are integral to planetary processes, acting as conduits connecting terrestrial landscapes with oceans and the atmosphere. The sediment and nutrients transported from rivers to estuaries serve as essential nourishment for diverse marine ecosystems. Estuaries themselves act as critical breeding grounds and nurseries for countless marine species, making the health of upstream river systems vital to ocean biodiversity. Satellite remote sensing provides a powerful lens through which to monitor these interactions in near real-time with astonishing spatial coverage.

One of the most pressing global environmental concerns linked to river systems is nutrient pollution, which frequently leads to harmful algal blooms. These blooms, fueled by excess nitrogen and phosphorus from fertilizer runoff and sewage discharge, pose severe risks to public health and aquatic ecosystems. Professor Feng’s ongoing research, supported by a substantial grant from the National Science Foundation, aims to unravel nutrient dynamics over the past five decades across multiple rivers worldwide. This extensive historical analysis is anticipated to improve early warning systems, allowing water managers to preemptively respond to developing algal blooms before they reach toxic levels.

The biogeochemical cycles underlying these nutrient movements involve complex feedback mechanisms. Algal blooms block sunlight from penetrating the water column, suffocating submerged vegetation that supports aquatic life. Upon decomposition of the dead algae, oxygen levels in the water plummet, creating ‘dead zones’ where fish and other organisms cannot survive. This process, known as eutrophication, exemplifies how human-induced nutrient loading can trigger cascading ecological failures. Understanding and modeling this cycle is critical for devising targeted mitigation strategies.

Satellite technology, combined with sophisticated computer modeling, is revolutionizing the ability to track water quality parameters such as turbidity, chlorophyll concentration, and dissolved organic matter with unprecedented precision. Dr. Xiao Yang from Southern Methodist University highlights how spectral signatures obtained from satellites can differentiate among various pollutants and ecological indicators. This technological advancement enables continuous global surveillance and geographically detailed water quality assessments that were not feasible before.

The applications of these remote sensing tools extend beyond academic research; they have real-world implications for managing urban infrastructure and protecting public health. Cities that rely heavily on river water for drinking need accurate and timely data to prevent toxic algal contaminants from entering treatment plants. Given that around 90% of the world’s population lives within six miles of a river, technological breakthroughs in monitoring river systems have direct societal benefits, including safeguarding drinking water, supporting recreational activities, and preserving biodiversity.

Moreover, this satellite-enabled river science promises to illuminate previously hidden aspects of hydrological variability and change. By tracking fluctuations in river flow and quality across diverse climatic zones, researchers hope to better understand how climate change will impact freshwater availability and ecosystem services. The integration of historical datasets with contemporary remote sensing observations offers a pathway to predictive models that inform adaptation and conservation efforts worldwide.

The multidisciplinary collaboration evident in Feng’s study incorporates expertise from hydrology, environmental engineering, satellite physics, and data science. Such integrative research approaches are becoming increasingly necessary to tackle complex environmental challenges that span geographic and disciplinary boundaries. The comprehensive global perspective championed in this research paves the way for a new era of river science, where policy decisions and resource management are underpinned by data-driven insights and continuous observation.

As research progresses, the challenge will be to translate these tremendous amounts of data into actionable knowledge. This entails developing user-friendly platforms for water managers and policymakers to interpret satellite-derived information effectively. Ensuring accessibility while maintaining scientific rigor requires ongoing innovation in data analytics and communication. Nonetheless, the promise of these technological tools to safeguard freshwater resources against pollution and ecological degradation has galvanized the scientific community and stakeholders alike.

In conclusion, the integration of satellite remote sensing into river science marks a transformative advancement in understanding and managing one of Earth’s most essential natural resources. Pioneered by experts such as Professor Dongmei Feng, this approach enables scientists to overcome traditional barriers to studying rivers, track nutrient pollution trends, and predict ecological threats such as toxic algal blooms. As the global population continues to grow and climate change accelerates, technologies that provide real-time, global-scale insights into river ecosystems are indispensable for sustainable water management and environmental protection.

Subject of Research: Hydrology, water quality control, and nutrient dynamics in rivers using satellite remote sensing technology.

Article Title: Remote sensing and the new global river science

News Publication Date: 17-Jun-2026

Web References: DOI: 10.1038/s44221-026-00665-2

Image Credits: Andrew Higley

Keywords: Hydrology, Water quality control, Sewage treatment, Water delivery, Environmental engineering, Natural resources management, Pollution control

Sri Lanka’s recent drowning deaths linked to aftermath of extreme weather events

DEDURU OYA, Sri Lanka – On April 16, eight members of Priyantha Kumara’s family including his wife, son, brother, father-in-law, and four other relatives were swept away by strong currents in the Deduru Oya, a river in Sri Lanka’s North Western province. Sri Lanka Police reported more than 30 drowning deaths between April 12 and 21 this year, underscoring the risks posed by flooding rivers. Sri Lanka Police media spokesperson Udaya Kumara Wootler told Mongabay that 376 individuals have died due to drowning in rivers last year while 595 fatalities were reported in 2024. Buddhika Sampath, spokesperson for the Sri Lanka Navy told Mongabay that the Navy Diving Unit recovered 148 bodies of people between May 2022 and May 2023. While the police are yet to disclose official statistics of deaths due to drowning from January to May 2026, the number of reported incidents show over 50 fatalities. Kumara is a resident of Gopallawa in the northwestern district of Kurunegala. His son had requested that they all go for a bath in the river. The group had been bathing at a popular spot named Kuriyagas Mankada when they met the tragedy. “My son was only 13 years old, and he was a bright student,” Kumara told Mongabay. “My brother was about to hold a housewarming ceremony at his newly built house. But all these dreams were shattered within seconds. My father used to take us to this same spot to bathe when we were young. But the river has changed…This article was originally published on Mongabay

Northern Thai residents march for action on polluted rivers. ‘This is an emergency’

8 June 2026 at 05:19
BANGKOK — More than 600 residents of Chiang Mai and Chiang Rai provinces embarked May 31 on a roughly 68-kilometer, six-day ‘peace walk’ to demand the Thai government take action on the river pollution crisis that has seen Thai rivers polluted with heavy metals. The ensemble of affected residents, civil society groups, monks and students marched from Tha Ton subdistrict in Chiang Mai to the city of Chiang Rai in northern Thailand, reaching their destination on June 5, World Environment Day. For more than a year, Thailand’s Pollution Control Department has reported dangerous levels of arsenic, mercury, cadmium and other heavy metals in rivers across northern Thailand, with mining operations across eastern Myanmar suspected to be responsible for the pollution. “We are walking because our rivers are slowly dying,” Pianporn Deetes, executive director of the Rivers and Rights Foundation, which helped to organize the peace walk, told Mongabay by phone. “Toxic contamination from unregulated mining upstream is already affecting water, fish, food, livelihoods, and public health. We do not want to wait until more people become sick. This is an emergency.” Pianporn said the walk (42 miles) was about taking collective action to share information, document impacts and build public pressure in a bid to force the government to address the issue, which Pianporn said has, so far, been lacking. “Monitoring has improved, but action has not matched the scale of the crisis,” she said. “We need urgent diplomatic engagement with neighboring countries, stronger health monitoring, transparency, and action to…This article was originally published on Mongabay

❌