Physicists have revealed that the unusual decay of an “exotic” subatomic particle could offer new clues to its mysterious structure.

The discovery, reported by a team of physicists in a study published in Physical Review Letters, argues that it provides the first “crucial discrimination” between current theoretical models of a variety of subatomic particles known as the Ds(2317) meson.

Exotic Subatomic Mysteries

The new research has its beginnings more than two decades ago, with the initial detection of an unusual particle known as the Ds(2317) meson. Part of what makes this particle unique is the fact that it possesses one charm quark (or “c quark,” a kind of elementary particle) and one strange antiquark—the third lightest of all the known quarks.

It was deemed a major discovery at the time, and for good reason: it seemed to point at a significant discrepancy between the particle’s measured mass of 2.317 GeV/c2, and predictions based on estimates that placed it significantly higher, at around 2.4 GeV/c2.

Now, in a new study by researchers with the Belle and Belle II Collaboration, observations of previously undetected behaviors that include never-before-seen light-emissions during the particle’s decay have been described for the first time.

Based on their analysis, the team believes their new findings mark not only a significant first in the study of these particles, but that they may also help researchers solve the longstanding mystery involving apparent discrepancies between the observed and expected mass values for the Ds(2317) meson.

The findings, the team says, could also provide physicists with deeper insights into the fundamental forces that currently bind matter.

Unraveling a Baffling Discrepancy

The team approached the problem by first proposing a range of different models that could potentially describe the internal structure of the Ds(2317) meson. Of key importance was the fact that each of the different models allows researchers to predict a specific range of potential values for the particle’s decay.

This was achieved based on the probability that the Ds(2317 meson will decay by emitting a gamma ray, which was then divided by an entirely separate probability: that the particle would emit a pion—a type of meson with a mass roughly 270 times that of an electron—rather than a gamma ray.

Based on these two possibilities, the team determined that measurements indicating a ratio of greater than 8.1% would point to the likelihood that the meson represents a compact state involving quark-antiquark models.

However, if the calculated value turned out to be lower—specifically in the range of between 0.5% and 4.25%—that would instead favor models that describe the particle as functioning closer to being a sort of molecule-like state of two separate mesons.

Well Above Standard Deviations

With such values in mind, the team then went to work to determine which was more likely with help from data collected by the Japanese KEKB and SuperKEKB electron–positron colliders.

Using this information, the particle’s gamma-emitting decay was successfully detected, revealing a statistical significance above ten standard deviations. Next, the Belle and Belle II Collaboration conducted measurements that showed the decay ratio between photons and pions was close to 7%, placing the determined value smaller than the majority of quark-antiquark models, and at a greater value than those in the molecular models.

“This result provides crucial discrimination between theoretical models of the Ds(2317) structure,” the team writes.

Going forward, the researchers believe additional insights that may help to conclusively reveal the mysterious Ds(2317) meson’s structure may be achievable through more complete measurements of the particle’s decay rate.

The recent paper, “Observation of the Radiative Decay 𝐷*𝑠0(2317)+→𝐷*𝑠+𝛾,” appeared in Physical Review Letters.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

It’s not the kind of thing astronomers expect to see while observing the powerful effects of a distant supermassive black hole: an unprecedented UFO sighting.

However, that’s precisely what one group of scientists now reports in a preprint paper, who detail the successful detection of one of the strongest UFOs—a black hole phenomenon otherwise known as “ultra-fast outflows”—that astronomers may have ever seen.

The landmark detection was made possible with the XMM-Newton space observatory and NuSTAR X-ray telescope, which allowed the researchers behind the discovery to observe a luminous quasar with origins that date back to “cosmic noon,” revealing a pair of outflow wind components being blasted from the black hole in question.

Cosmic Monsters with Major Appetites

Black holes have more than just large appetites for cosmic material: they also produce significant gas-driven winds from around their accretion disk.

These winds become known as ultra-fast outflows (UFOs) when their strength propels them to greater than ten percent of light speed, and astronomers currently believe they are an important part of what helps black holes regulate their growth, which may also hold for their host galaxies.

One way this occurs is that UFOs help to heat galactic gases that give rise to star formation, a quenching process that most astronomers believe occurred during a period called “cosmic noon,” which occurred between 1.6 and 3.5 billion years after the birth of the universe.

Cosmic Fingerprints of Powerful UFOs

Astronomers can detect ultra-fast outflows based on the “dips” they create in their powerful gusts, which are caused by ionized iron present in their outflow gases. These gases also absorb X-rays along their path away from their black hole originators, which leave “fingerprints” in the form of absorption features that are detectable using X-ray telescopes.

Significantly, these “dips” manifest as a blueshift since they are shifted to higher energies as they move at such high speeds (again, roughly 10% of the speed of light). From the blueshifted energy signatures they comprise, astronomers can determine not only the presence of UFOs, but also the wind speed of their gusty outflows.

In the past, most detections of these high-powered cosmic phenomena have relied on gravitationally lensed quasars. These celestial objects occur when a galaxy or similar feature closer to Earth appears in front of them, magnifying the quasar’s light and significantly brightening its luminosity from our Earthly perspective.

However, lensing of this variety can also present problems, and so astronomers led by Giorgio Lanzuisi of INAF Bologna designed a special system to target more than a dozen hyper-luminous quasars at cosmic noon, as a means of getting a better feel for the dynamics of non-lensed quasars.

“WISSHFUL” Thinking

WISSHFUL is an XMM-Newton multi-year heritage program that Lanzuisi and his colleagues designed for this purpose, whose initial target became a quasar designated WISSH13, whose redshift at 3.294 marks the object’s existence as it appeared approximately 2 billion years after the Big Bang.

WISH13’s black hole also weighs in at close to 2 billion times that of our Sun, which causes it to shine far brighter than normally expected for an object of its estimated mass.

Their work began in the autumn of 2024 by combining observations from XMM-Newton and NuSTAR initially obtained in 2017. From these X-ray images of WISSH12, a pair of distinctive absorption features became evident, which the team determined to have been generated by two separate sources from within the same ultra-fast outflow.

These components were found to travel at different speeds: one moving at close to 30% of the speed of light, while the other at only about 10% of light speed. The slower of these two appears to have been an enduring component of the UFO, while the faster one showed signatures that indicated a more recent appearance. This could mean that it emanates from events that are shorter in duration.

By matching theoretical predictions of a layered wind structure surrounding the black hole, the researchers say their observations align with models that indicate a fast-moving inner “spine” launched from the accretion disk’s innermost regions. Meanwhile, a slower outer “sheath” is also believed to emanate farther from the black hole. The combined outflow components produce an estimated 21 to 24 solar masses of material annually.

The Most Massive UFO Ever Observed? 

Such figures, the team says, represent what is believed to be among the most massive and energetic ultrafast outflows ever observed, a discovery which also marks the highest-redshift ultrafast outflow yet detected in a non-lensed quasar.

Despite their remarkable energetic output, the team says these outflow winds seem to conform to the same essential relationships observed in active galaxies much closer to Earth, suggesting that the processes driving these outflows have remained remarkably consistent across cosmic time.

Going forward, the team says they hope to make additional observations of these powerful cosmic phenomena with help from the new Athena X-ray mission, which they say could help uncover similar winds in even more distant quasars.

The team’s discoveries were detailed in a recent paper, “The WISSHFUL program: the highest redshift UFO discovered in a non-lensed QSO,” which appeared at the preprint arXiv.org server.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

Scientists from Asia Pacific’s largest paint and coating manufacturer have developed a new “ultra-black” automotive coating using carbon nanotubes that absorbs over 99% of the light it receives, resulting in the darkest black of any currently available paint or coating.

The NIPSEA Group’s research team said its new ultra-black coating, which they describe as “deep, jet black,” meets stringent automotive standards, a critical requirement in markets like China, where trendy, luxury vehicles in the darkest colors are in high demand.

Carbon Nanotubes Absorb Light to Create Darkest Black “Ultra-Black” Coating

According to a statement announcing the new ultra-black coating, BMW first introduced a concept car in 2019 with a vertically aligned carbon nanotube (VACNT) array outer coating. Due to the unique material properties of carbon nanotubes, including the ability to bend or absorb light, the researchers said that its introduction “set off a race” among auto manufacturers to create a similar, ‘black hole’ effect with a pronounced dark appearance. 

“Automotive coating companies have been actively pursuing innovations in color technology to develop mass-processable ultra-black coating solutions with extreme blackness,” explained Zhiwei Liu, a research chemist with the company’s Color Technology Group, Core R&D, and an author on the study outlining the new coating.

The researchers note that ultra-black coatings are in unusually high demand in Asian countries, where having the darkest vehicle can represent a status symbol. has become a “key selling point” in China.

“Deep black finishes have long been the premium choice and signature color for luxury cars due to their elegant appearance, powerful visual impact, and luxurious undertone,” the researcher explained.

Although scientists have explored more practical ways to achieve the desired ultra-black effect, the new research once again leverages the unusual properties of carbon nanotubes to create an ultra-black coating that is darker than even the darkest commercially available alternative.

Creating a Stable Composite That Meets Automotive Standards

According to the team’s statement, they began by exploring methods to combine the benefits of carbon nanotubes with a black pigment that would serve as the coating’s color base. Critically, the team needed to create a nano-sized carbon black pigment-carbon nanotube composite that was also stable at a wide range of temperatures. and moisture conditions.

After exploring several formulations, Liu and colleagues succeeded in a stable nanotube-pigment composite. Next, the team incorporated the new carbon nanotube-based mixture into a coating binder and sprayed it onto a model car.

Because the new ultra-black coating uses structural absorption of light rather than the carbon black dispersion method used in current approaches, tests revealed an average absorption of 99.90% across all visible wavelengths. The team said its new coating also displayed “excellent long-term stability” during water and humidity tests.

Although the light absorption levels set a new standard for the darkest achievable automotive coating, Liu said advancements in dispersing technology and equipment leave his team “room for improvements.” The researcher highlighted potential advancements in “practical processability of carbon-nanotube-containing nanomaterials.”

Liu and colleagues also noted that increasing the proportion of carbon nanotubes in the material could further increase its light-absorbing capacity. However, they conceded, this approach “would also bring difficulties in industrial-grade processability.”

Future Improvements Include Even Darker Multi-Layer Options

When discussing potential future improvements, the team said scientists could fabricate multilayered ultra-black coatings. In theory, they note that this approach could result in a “gradient refractive index that reduces interface reflection and further enhances light absorption efficiency,” producing an even darker look than their single-layer version.

Although the ultra-black automotive coating is not yet commercially available, the team said they have already completed a “proof of concept” manufacturing design. Still, they conceded, given technical and regulatory challenges that remain, “it may still be a while before ultra-black cars made with this film will be able to hit the road.”

“Further efforts will focus on the verification of coating application window and the comprehensive film performance validations of carbon black pigment-carbon nanotube composite-based ultra-black automotive coating,” Liu concluded.

The study “Robust ultra-black automotive coating with structural absorption and high absorption efficiency based on waterborne carbon black/CNT composite” was published in Matter & Light.

Christopher Plain is a Science Fiction and Fantasy novelist and Head Science Writer at The Debrief. Follow and connect with him on X, learn about his books at plainfiction.com, or email him directly at christopher@thedebrief.org.

A new material, inspired by the frustratingly powerful strength of a tangled ball of staples, could represent the future of flexible, adaptable design.

Published in the Journal of Applied Physics, material scientists and engineers from the University of Colorado Boulder’s Paul M. Rady Department of Mechanical Engineering revealed an interlocking particle design that can be shaped into rigid structures, and then return to a pile of loose pieces with only a targeted movement or vibration.

The particles, the team says, could potentially be used as a building material with high strength and flexibility, capable of reshaping into new forms on command.

Staple Ball Strength

The difficulty of separating tangled metal, such as a cluster of standard office staples, intrigued the researchers enough to investigate how interlocking particles could be used in recyclable construction. Such techniques are found in nature, as birds weave together found objects to create strong structures to protect their young.

On the level of particles, interlocking such elements is called “entanglement,” and is a relatively new focus for material scientists.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

“We’ve been playing around with the idea of building blocks and geometry for many years, but we started looking at interlocking, entangled particles only recently,” said Professor Francois Barthelat, the leader of the Laboratory for Advanced Materials & Bioinspiration.

“We are excited about the combination of properties we can get out of these systems, and we believe this technology has the potential to go in many directions,” Barthelat said.

Manufacturing Entanglement

While entanglement occurs naturally, as in the combination of soft protein and hard minerals that interlock to form bones, producing it artificially requires a careful understanding of how these interactions work. According to the team, particle shape is the most foundational element to natural entanglement.

“Let’s take sand as an example,” says PhD student Youhan Sohn. “Sand is smooth and convex-shaped, meaning it cannot interlock from grain to grain.”

“However, we found that if we change the shape of a grain of sand, we can drastically affect its behavior and mechanical properties, including the particle’s ability to link with other particles,” Sohn adds.

With shape decided as the researcher’s primary focus, they began running computer models, called Monte Carlo simulations, to observe how various potential shapes would interact, aiming to identify the optimal entanglement geometry. The shape their research settled on was remarkably similar to that of a staple: a particle with two legs.

Laboratory Material Experiments

After achieving success in the digital realm, the researchers fabricated the shape in the real world to test its behavior under practical conditions. During these tests, the team discovered that their optimized shape contained even more beneficial qualities than they had initially understood.

Conventional materials typically experience a trade-off between toughness and tensile strength. Typically, materials that are extremely tough and can absorb large amounts of energy are also quite brittle, lacking the ability to stretch or bend. However, this staple-like particle design exhibits an unusually high amount of both properties simultaneously.

“Our entangled granular material using the staple-like particle demonstrates both high strength and toughness at the same time,” said PhD student Saeed Pezeshki.

Additionally, they discovered that applying different vibrational patterns would change the particles’ degree of entanglement, allowing the team to assemble and disassemble a shape instantly. Applying a light vibration caused the pieces to interlock, whereas a heavy vibration untangled them as a pile of loose particles.

Material Applications

“No binder is required, so particles can be rapidly assembled in an infinite number of shapes, which can be reconfigured with appropriate mechanical stimuli, making them attractive for lightweight and reversible materials and structures and aggregate architectures,” the authors recently wrote.

“The fundamental understanding of entanglement gained in this project is also relevant to other physical systems, including biological structures, ‘living’ entangled matter, robotic materials, as well as colloidal assemblies,” the authors add.

“It’s a strange material because it’s obviously not a liquid. However, it’s also not quite solid,” Barthelat said. “This opens new and intriguing engineering possibilities.”

“Handling a bundle of these entangled particles feels very remote and exotic,” he added.

The paper, “Combined Effects of Particle Geometry and Applied Vibrations on the Mechanics and Strength of Entangled Materials,” appeared in the Journal of Applied Physics on April 14, 2026.

Ryan Whalen covers science and technology for The Debrief. He holds an MA in History and a Master of Library and Information Science with a certificate in Data Science. He can be contacted at ryan@thedebrief.org, and follow him on Twitter @mdntwvlf.

A new 3D image projection system from researchers at the UCLA Samueli School of Engineering and the California NanoSystems Institute (CNSI) marks a major step toward overcoming a longstanding problem for holographic technology.

Professor Aydogan Ozcan led the work reported in a recent paper published in Light Science and Applications, which describes the team’s new snapshot 3D image projection system, solving one of the technology’s most daunting issues.

“These results establish the diffractive 3D display system as a compact and scalable framework for depth-resolved snapshot 3D image projection, with potential applications in holographic displays, AR/VR interfaces, and volumetric optical computing,” the authors write.

3D Image Challenges

While 3D films viewed wearing special glasses were popular a decade ago, this type of 3D image projection is something more akin to the holodeck on Star Trek, projecting sophisticated, real-time images. While advances have been made in bringing such technology to life, many obstacles remain to creating convincing three-dimensional projections.

The snapshot 3D image projection system described in the paper combines a digital encoder with a passive optical decoder and uses a deep learning algorithm that operates end-to-end to overcome one of holography’s greatest challenges. 

Interplane cross-talk is one of the main issues associated with 3D image projection. As 3D objects are sliced up and images projected at various depths, elements from one image can leak through to the image in front of it, destroying the illusion of a solid object existing in three-dimensional space. 

Improving Holographic Technology

In the new system, an image first enters the encoder, which uses a Fourier-based neural network to separate spatial and frequency features into a stack of images. It then analyzes the positions where the images will be projected to simultaneously generate a 3D visual. Then the images are decoded and projected onto structurally optimized surfaces, where the depth-dependent field programming occurs as the light propagates.

The deep learning algorithm, building on recent advances in combining machine learning and 3D projection, optically routes the image slice to its correct depth while adjusting for in-plane leakage.

Together, this system creates a compact, high-fidelity display in a single shot, combining closely spaced axial planes to create the illusion of a three-dimensional object from projected light. These improvements provide for a more natural depth perception and increase visual comfort for the viewer.

The Future of 3D Image Technology

Advancing 3D imaging technology is essential for a variety of emerging applications, including augmented reality, virtual reality, holography, and immersive visualization. The rapid degradation of image fidelity caused by light bleed has been one of the primary issues impeding progress in these fields.

So far, the researchers have demonstrated their multi-plane snapshot image projection with a model of volumetric scenes comprising 28 axial slices. They also constructed a simpler real-world prototype to validate the model, made of only two planes. Experiments with the prototype corroborated the model’s results, producing outputs that matched the simulated numbers and achieved a similar image quality. Additionally, when the team ran their prototype against a projection without a diffractive decoder, their device exhibited considerably superior performance.

Between the simulations and laboratory tests on a physical prototype, the team has demonstrated that their work is scalable yet compact, enabling a 3D display with high axial resolution. In their current form, the researchers see near-eye displays, microscopy, and volumetric optical computing as the primary use cases, but continued development could open possibilities for multi-perspective holography and energy-efficient 3D systems.

The paper, “Snapshot 3D Image Projection Using a Diffractive Decoder,” appeared in Light Science and Applications on June 10, 2026.

Ryan Whalen covers science and technology for The Debrief. He holds an MA in History and a Master of Library and Information Science with a certificate in Data Science. He can be contacted at ryan@thedebrief.org, and follow him on Twitter @mdntwvlf.

A research team from Wessex Archaeology, led by Phil Harding, has announced the discovery of a Stonehenge ‘prototype’ structure, similarly aligned with the solstices, that may have served as an early proof of concept for the more famous structure built 500 years later.

The team behind the historic discovery said that the ancient date represents the earliest known alignment with the solstices and offers potential insights into the religion, belief systems, scientific knowledge, and worship practices of the ancient monument builders.

Location of Stonehenge Prototype Excavated a Decade Earlier

According to a statement announcing the discovery of the Stonehenge prototype, the structure is located 5 kilometers from the better-known stone circle. They also note that Stonehenge’s earliest earthworks were beginning construction around this same time.

Previous expeditions to the site conducted between 2015 and 2017 unearthed 48 pits, which those researchers dated to more than 2,000 years before the new find, or roughly 2,950 BCE. Still, the team notes that earlier efforts uncovered samples of pottery, animal bones, flints, and charcoal, suggesting that “large numbers of people gathered here over a relatively short period of time” to celebrate the longest day of the year.

Notably, one of the pits unearthed in the earlier excavations included what the team described as a possible “viewing station.” The pit also contained a disc-shaped knife, which the team notes “was deliberately placed here possibly as a symbolic reference to the sun disc.”

Still, the original effort left several tantalizing clues, leading to the new excavations.

Wooden Poles Align With the Solstices to Within One Degree

Instead of exploring the previously discovered pits, the team focused on the rest of the site. This effort led to the discovery of a pair of wooden pole pits placed 120 meters apart. According to the Wessex Archaeology team’s statement, the site’s ancient builders positioned the poles in the pits “to form a line pointing directly at the rising sun during the summer solstice and at the setting sun during (the) winter solstice.”

Although little of the structure remains, except for the pits where the poles once stood, the team was able to extract enough organic material to date the likely construction period of the structure. A radiocarbon analysis showed that the summer solstice poles were likely set around 5,000 years ago, more than 2,000 years earlier than the other pits at the same site. Perhaps even more surprisingly, the date placed the construction of the wooden poles roughly 500 years before ancient engineers built the world-famous site of Stonehenge.

To confirm the astronomical alignment, the team reached out to archaeologist Fabio Silva. According to the team’s statement, Dr. Silva, a Skyscape Archaeologist at Stone x Sky and the Skyscape Academy, used ancient reconstructions of the sky and the landscape to show that the structure would have aligned with the summer solstice “within an accuracy of one degree.”

When discussing the site’s potential uses, the researchers note that it would have served as a temporary gathering place for ancient celebrations of the summer and winter solstices until a more permanent structure could take its place. They even suggest that a similar structure may have been used in Stonehenge’s earliest phases, while conceding that traces of any similar alignment would have been erased by later construction.

Harding, who led the excavations, said the discovery of a possible Stonehenge prototype “is probably one of the greatest finds of my career,” while adding that the early date is what makes it so exceptional.

“Up till now, our knowledge of this ancient feat of astronomy was based on Stonehenge and other monuments of a similar period, but what we’ve discovered at Bulford is 500 years earlier than the famous stones we know so well,” Harding explained. “It makes me incredibly proud to be an archaeologist.”

“Part of a Much Longer Conversation Between People, the Land, and the Sky”

Although the ancient structure revealed a scientific knowledge predating Stonehenge by several centuries, Dr Matt Leivers, Senior Research Manager at Wessex Archaeology, said the discovery of a clearly religious site is “fundamental” because it is the earliest example of people building structures at this historically significant location “that aim directly at the solstice.”

“When we talk about the solstice, we’re talking about religion,” Dr. Leivers said. “About how prehistoric peoples understood the cosmos, the world, and their place in it.”

“It’s likely their way of saying to their deities, please keep us in mind, keep us warm and safe,” he added.

Dr Silva noted the historical significance in relation to Stonehenge, since the site shows that ancient communities “were already engaging with both the summer and winter solstices” in the same general area hundreds of years before the larger, more famous stones were put in place. The researcher also said the findings allow historians to see Stonehenge as more than a singular creation, but “as part of a much longer conversation between people, the land, and the sky.”

“Rather than marking the beginning of a story, Stonehenge now more clearly appears to have emerged from traditions and practices with much deeper roots in this landscape,” Dr. Silva concluded.

Christopher Plain is a Science Fiction and Fantasy novelist and Head Science Writer at The Debrief. Follow and connect with him on X, learn about his books at plainfiction.com, or email him directly at christopher@thedebrief.org.

An experimental aircraft just achieved a “major milestone” that NASA officials say brings the future of quiet supersonic flight closer to being a reality.

The test flights involved the American space agency’s secretive X-59 aircraft, which reportedly reached speeds of 1.4 Mach—roughly 924 miles per hour—during a flight last Friday.

Reaching an altitude of 55,000 feet, the experimental aircraft’s speed and height during last week’s test flight met the conditions the agency says are required for future flights aiming to achieve supersonic flight without the noisy booms it usually generates.

In a statement, NASA said the aircraft’s tests are far from complete, although Friday’s test marks a significant milestone toward reaching its current mission goals.

“The X-59 still has months of performance testing ahead, but after those are complete, NASA’s Quesst mission will fly the aircraft over several U.S. communities to collect data on public perception of the quiet sonic thump it will make at supersonic speeds,” NASA’s statement on Friday read. “Those community overflights will include flights at Mach 1.4 and 55,000 feet.”

Another Milestone for NASA’s X-59

Last week’s test occurred within days of an earlier takeoff that sent the X-59 on its first successful supersonic flight, where the plane reached a top speed of Mach 1.1.

The earlier test also marked a leap forward for the Quesst mission, which is in the process of completing several crucial steps that are expanding the X-59’s capabilities.

Deployed for test flights at various speeds and at different altitudes, flight engineers are currently gauging the aircraft’s flight envelope by having it perform in a range of different flight conditions.

During its current test flights, NASA said the supersonic aircraft was accompanied by a NASA F-15 research aircraft, which still produces a sonic boom when it flies, unlike the X-59. NASA engineers plan to mount a shock-sensing probe on the accompanying aircraft during future flights, which the agency says will collect vital information about the shock waves the experimental aircraft produces.

The resulting experiments will help engineers measure the exact capabilities of the new aircraft and its supersonic performance.

Additional Prep for NASA’s Quesst Mission

Although designed to function as a “quiet” supersonic aircraft, the X-59 still produces audible signatures, which NASA likens more to being a soft “thump” than a sonic boom.

During its final testing phases, the X-59’s supersonic acoustic signature will also be measured.

If all goes according to plan, the supersonic aircraft will complete its full round of testing in the months ahead, marking a successful series of demonstrations that it meets all the requirements for quiet flight under a range of different altitudes and other flight conditions.

Ultimately, the technologies being innovated by this experimental plane will help to enable the first supersonic flight over land in decades, paving the way toward a new future of commercial flight faster than the speed of sound.

Additional details about NASA’s Quesst program can be found on its official site.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

Future interstellar travelers who hope to reach distant star systems will likely need better propulsion technologies than the chemical rockets humans currently rely on for our exploration of space.

Among the range of proposed alternatives, one potential candidate involves what are called solar light sails, a theoretical propulsion system that relies on pressure generated from solar radiation against a large surface to move a spacecraft.

Such concepts have been proposed since the 1980s, some of which combine the idea of using sunlight as a power source with the implementation of lasers, which could propel such futuristic starships to speeds our best current technologies cannot attain.

However, not all spacecraft propulsion experts are necessarily sold on the idea of solar light sails just yet. According to new findings detailed in a paper by researchers Jiaze Li and Chao Shen of the Harbin Institute of Technology in China, this novel form of propulsion may have a few hurdles to cross before it can attain the near-light-speeds many experts had hoped for.

A Tale of Three Forces

According to Shen and Li’s recent research, a key problem arises once a solar light sail spacecraft begins nearing the speed of light: drag forces resulting from the very source of energy used to propel the devices could place significant limitations on their maximum attainable speeds.

A combination of different forces can be expected to occur as sunlight strikes a light sail, the authors say, which includes incident light, specular reflection, and diffuse scattering.

Incident light describes the physical momentum generated by light energy in the form of photons as they strike the sail, whereas specular reflection describes the momentum produced as photons reflect off the sail. Finally, diffuse scattering is a separate form of momentum generated by photons, which, rather than bouncing away upon impact, is actually absorbed by the sail, the energy from which is thereafter released in random directions.

New Limitations on Solar Light Sails

Based on these primary forces, the authors identify that once a light sail begins reaching relativistic speeds, it also becomes subjected to intense Doppler effect—the phenomenon that occurs as changes in the frequency of waves result as their source and an object or observer’s distance changes in relation to it.

In the case of solar light sails, the more the frequency of light waves striking the sail decreases, the less the amount of thrust generated by the three forces the paper identifies. In simpler terms, the faster a solar light sail spacecraft attempts to travel, the harder it becomes for it to accelerate.

Relativistic Light Aberration

At approximately 75% of the speed of light, the researchers say that an additional hindrance emerges, as what physicists call relativistic light aberration takes over. This phenomenon, first described by Einstein more than a century ago, involves relativistic corrections of light sources for observers who move at velocities approaching light speed.

In the case of our prospective future solar light sailors, this would mean that the weakest of the three forces impacting the sail (diffuse scattering) would begin to impose an active drag once the sail reaches approximately three-quarters of light speed. While the overall force of lasers helping to propel the light sail would remain positive at this stage in the system’s acceleration, the authors note an inevitable decline in efficiency.

The authors do concede that while their paper examines the radiative dynamics of solar light sail propulsion, it does not account for other factors that may include drag resulting from encounters with materials like gases, dust, or other physical sources (i.e., non-radiative sources), which could also impact overall speeds.

Additional factors worthy of consideration, but which the authors do not directly address in their paper, include the melting point of any materials used for solar light sail propulsion, which could be heated to extreme temperatures due to combined exposure to solar radiation, laser energy, and friction from movement.

Fundamentally, the team reports that their paper “provides a rigorous and in-depth theoretical foundation for lightsail dynamics,” which illustrates that while this future propulsion concept has its merits, we may still be far from seeing its realization for practical space travel.

By outlining the factors that contribute to constraints on light sail propulsion, Li and Shen aim to improve our overall understanding of this prospective future technology, thereby helping engineers to realize its potential for use in space exploration at some point in the future.

The team’s paper, “Relativistic Lightsail Propulsion Dynamics,” appeared on the preprint arXiv.org server.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

Scientists from the Southwest Research Institute’s Center for Lunar Origin and Evolution (CLOE) have revealed new models of the Moon’s oldest and largest impact crater, the South Pole-Aitken (SPA) basin, providing fresh insights into the event and resulting material deposition on the lunar surface.

The SwRI team behind the new models, which is part of NASA’s Solar System Exploration Research Virtual Institute, said such details will help prepare future Artemis astronauts for what they could encounter during their upcoming missions.

Impact Study Reveals Details About Moon’s Oldest and Largest Crater

In a statement announcing the new models, Dr. William Bottke, director of CLOE and executive director of SwRI’s Science Directorate in Boulder, Colorado, said that the basin is an attractive potential target for future Artemis missions since it offers a “rare opportunity” to study an earlier era in the Moon’s history.

“The collision struck the lunar surface with such force that it may have excavated material from deep inside the Moon, including portions of the lunar mantle,” explained the co-author of the impact study detailing the new research.

Although previous studies have modeled impacts that may have caused the Moon’s oldest and largest crater, the team’s new effort has revealed new evidence about the composition of the impacting object and its likely direction and angle.

“Our simulation produces the right shape and nature of the impact basin,” explained the impact study’s lead author, Dr. Shigeru Wakita of Purdue University. “It also tells us about the projectile that created it and the direction of the impact.”

For example, the new model suggests that the object was not a single, uniform object. Instead, the team found that the impactor was likely a “differentiated” object, such as a protoplanet or asteroid, composed of rock and surrounded by an iron core. The models also found that the object approached from the north “at a low angle” before impacting the Moon’s surface on a southward trajectory.

According to the impact study authors, the impact excavated a deep, “asymmetric” cavity and generated enough energy to melt the rock within the crater’s central basin, resulting in the SPA basin’s elongated, tapered shape. Their models also indicated that the object’s lunar collision “lofted” large amounts of material into the air. Critically, their models also revealed that material from both the lunar crust and mantle was likely ejected before ultimately settling back onto the basin floor.

Exploring Gravity’s Role and the Possibility of ‘Valuable’ Mantle in the Impact Ejecta

To help potential future lunar astronauts, including members of NASA’s Artemis mission, target the most scientifically valuable lunar samples, a second companion study explored the effects of gravity on ejecta distribution beneath and around the impact basin. According to the team behind that effort, their effort involved direct comparisons of high-resolution gravity data with models. Specifically, they wanted to determine if pieces of the Moon’s crust and mantle were included in the ejection.

After comparing the two, the authors of the second study determined that the SPA basin “likely contains substantial amounts of mantle-derived rocks” both within its interior and mixed into the wider ejecta blanket surrounding the basin. Also critical for future missions, the analysis revealed that this material was not all scattered during the initial impact.

Instead, the new models showed that subsequent, smaller impacts appear to have “excavated” these underlying mantle deposits. As a result, the team suggests that there is likely enough material on the surface of the Moon’s oldest and largest crater “where it could be readily sampled by robotic rovers or astronauts during future missions.”

The Studies Provide Future Lunar Missions with a “Powerful Roadmap”

When discussing the significance of the gravity study’s findings, lead author Dr. Gabriel Gowman of the University of Arizona said that before now, the “precise distribution” of lunar mantle material on the Moon’s surface “has been a big unknown.” For example, some previous theories suggested that the deepest ejecta might be found only in parts of the basin that are not currently included in planned Artemis missions.

Now, the team’s new models suggest that the impact that formed the SPA basin “ejected enough deep material to form a significant deposit that should still be accessible today.” More importantly, Dr. Gowman added, some of that scientifically valuable mantle material “at a trace level” may exist in regions currently under consideration for upcoming Artemis landings. Taken together, Bottke said, the two studies can provide a “powerful roadmap” for future lunar scientific missions to the Moon’s oldest and largest crater.

“It tells us not just how SPA formed, but where to look for the rocks that can answer some of our biggest questions about the Moon’s origin and evolution,” the researcher explained.

The Impact study “A southward differentiated impactor forms the tapered shape of the South Pole-Aitken impact basin on the Moon” was published in Science Advances.

The gravity study “Gravity Mapping of Lunar Mantle Material in South Pole-Aitken Basin Ejecta” was published in the Journal of Geophysical Research: Planets.

Christopher Plain is a Science Fiction and Fantasy novelist and Head Science Writer at The Debrief. Follow and connect with him on X, learn about his books at plainfiction.com, or email him directly at christopher@thedebrief.org.

Consciousness may arise in systems far different than the biology on Earth we are used to, according to University of California, Riverside (UCR) researchers, who argue that many forms of conscious experience may be possible in alien lifeforms.

Eric Schwitzgebel of UCR worked with Jeremy Pober, a former graduate student, not to understand what consciousness is, but rather, to explore whether it could arise in beings that differ radically from Earth’s biological standards.

At a time when questions about the possibility of alien life visiting Earth are on many minds, their work examines what unexpected forms might achieve consciousness—the first step toward intelligence.

Substrates and Consciousness 

Central to the pair’s work is the idea of “substrates,” from the Latin for “the level below,” referring to the underlying material base from which something is made. Although the term may be most familiar from geology, it can be applied conceptually across many disciplines, from biology to linguistics, to describe an underlying structure or form.

The researchers framed their core question around what they call “substrate flexibility”: can a specific property be achieved across many substrates, or is it more limited? One example they use is computer data storage. Information can be stored in many ways, including optical, magnetic, and solid-state media, indicating that storage exhibits a high degree of substrate flexibility.

But what about consciousness? Can it also be achieved flexibly? Perhaps the answer depends on the specificity of the question and whether we are considering human consciousness or a broader concept of consciousness itself.

A Diverse Universe

The researchers began by considering the scale and nature of our universe as it is presently understood. That includes roughly a trillion galaxies containing countless planets unlike our own, which they estimate may have given rise to more than a thousand alien civilizations during the 13.8 billion years since the Big Bang. Notably, they do not focus solely on Earth-like planets that might theoretically harbor biological life recognizable to us.

“With that many draws from the lottery, some of these life forms will be strange indeed,” the pair writes in their paper.

This idea is not far-fetched, as astrobiologists have long hypothesized that life in the cosmos may take forms radically different from those on Earth, composed of available local materials, possibly including entirely different chemical structures.

The pair does not argue that such exotic lifeforms definitely exist in some corner of the universe, only that, in such a large and diverse universe, it is relatively unlikely that the same building blocks would commonly arrange themselves in precisely the same way as on Earth.

Consciousness Isn’t Special

Taking inspiration from the idea of Nicholas Copernicus, the researchers argue that since the Earth, and thereby humanity, are not the center of the universe, it is likely that consciousness is also not a unique feature of our planet, or even recognizable biology.

However, the authors are quick to note that simply because consciousness may exist in multiple substrates does not mean it must exist in every substrate. AI systems, for example, may represent a form of silicon-based life, but they are not necessarily conscious at present. Additionally, perhaps how they are conscious should be considered more broadly, taking into account the variety of possible substrates, rather than simply assessing how well AI models the human brain.

That broader perspective is a crucial element of the pair’s conclusions. Consciousness should be considered in terms wider than simply assessing how well something replicates the human mind. While the authors concede that a similar substrate may be required to perfectly reproduce human consciousness, a broader view of the phenomenon may be necessary to recognize forms of consciousness that are fundamentally alien to our own.

The paper, “Substrate Flexibility and the Copernican Principle of Consciousness,” appeared in draft form on the University of California, Riverside website on May 28, 2026.

Ryan Whalen covers science and technology for The Debrief. He holds an MA in History and a Master of Library and Information Science with a certificate in Data Science. He can be contacted at ryan@thedebrief.org, and follow him on Twitter @mdntwvlf.

New analysis of ancient frozen Greenland rubbish heaps, called middens, has revealed new insights into several ancient societies that have passed through the country over the last five millennia. The findings include insights into ancient diseases and animals that the inhabitants kept but didn’t eat.

Although the team noted the potential risk that climate change could release dangerous ancient microbes into the modern environment, their analysis found little evidence that the pathogens they identified could pose a threat beyond the immediate area around the middens.

Ancient Middens Offer Historical Insights Beyond Traditional Artifacts

Archaeologists have often excavated items discarded by ancient societies from trash heaps to learn more about the people who lived there. Although such excavations often unearth things like animal bones and mollusk shells, offering insights into diet and hunting habits, these ancient rubbish heaps can also contain human artifacts, such as discarded blades and other tools.

In a country like Greenland, where different peoples have settled the region since 2,500 BCE, the ancient middens may also contain microbes that could offer researchers an entirely different type of historical data. For example, microbial data from middens could reveal which diseases ancient populations had to survive. The team notes that microbes could also help determine what ancient societies kept “but perhaps didn’t eat.”

Still, studies of ancient midden microbes are limited, leaving a gap in historical knowledge. The authors of the new paper also highlight that rapidly increasing Arctic warming could release infectious diseases to which humans have lost immunity over the ensuing generations.

Over One Thousand New Species Were Identified

To bridge the information gap, Dr Frank Møller Aarestrup, a professor at the National Food Institute of Denmark Technical University and corresponding author of the article detailing the team’s research, examined samples collected during 2020 and 2021 expeditions in West and South Greenland. During those expeditions, scientists collected samples from middens locked in time by permafrost, dating back as far as 4,500 years.

Among the middens sampled were the ancient Norse sites of Kapisilit and Narsarsuaq, where researchers collected soil samples from what the new paper’s authors termed “historic winter enclosures.” The site also contained evidence that it was a summer grazing ground for livestock.

After selecting several soil samples, Dr. Aarestrup’s team sequenced the DNA of ancient microbes found in the midden samples. Next, they compared the data, including entire bacterial communities, to 143 soil samples previously collected from areas of permafrost far away from any known historical human settlements.

According to the team’s statement, the sequencing revealed a total of 1,207 species and differing ranges of bacterial species per midden. In denser areas, the team identified as many as 202 species, whereas less microbe-dense middens had as few as nine.

The team’s analysis also found several species that had not been previously identified. This resulted in the team labeling the unidentified microbes using what they termed “broad taxonomic categories” above the genus and species level, such as family and order.

Preserving the ‘Biological Legacy’ of Human Activity

When comparing the microbial communities in the ancient middens with those from samples collected away from human settlements, the team found a significantly richer community of ancient bacteria preserved in the middens. The team notes that this discrepancy confirms that the middens “preserved the biological legacy of human activity.”

The most soil-like bacterial communities were identified within the oldest Paleo-Inuit middens. The researchers said the finding suggests that the microbial “imprint” left behind by humans and animals diminishes over time.

Bacterial communities were also associated with the types of waste discarded in each ancient midden. For example, although most middens contained bacteria associated with human and animal hosts, middens from colonial-era Nuuk contained decomposing seal skins. The middens from colonial-era sites were also rich in the bacterium Clostridium perfringens, which the team notes is “a major cause of food poisoning.”

Risk of Ancient Pathogens is Low

Although the team identified strains of bacteria that can cause botulism or other life-threatening conditions, such as toxic shock syndrome, sepsis, and gangrene, they also found a diversity of antimicrobial-resistance genes in the genomes of bacteria collected from the same middens.

According to the study authors, finding the two sets of genes in ancient and modern soil layers “signaled that microbes resistant to antimicrobials can linger in permafrost for centuries.”

Fortunately, the team’s analysis found that most of the identified microbes, including potentially dangerous pathogens, don’t spread far from middens, even those undergoing defrosting. As a result, the team said that these ancient microbes  “pose little risk to public health,” at least for the time being.

“Here we show that the risk of release of ancient pathogens from ancient middens in Greenland is currently low,” Dr. Aarestrup explained.

Instead, the researcher noted that Arctic middens appear to function like “long-term natural experiments,” in which both human- and animal-associated bacteria, including “opportunistic” species carrying resistance genes, remain detectable centuries later as a broader “legacy of human activity.”

The study “Microbial composition of archaeological middens: Tracing Human Footprints Through Centuries in Greenland’s Ancient Settlements” was published in Frontiers in Microbiology.

Christopher Plain is a Science Fiction and Fantasy novelist and Head Science Writer at The Debrief. Follow and connect with him on X, learn about his books at plainfiction.com, or email him directly at christopher@thedebrief.org.

A curiosity that had been locked away in a museum’s archives for more than 200 years is now revealing clues to a longstanding Viking mystery.

Although much is known about these seafaring Scandinavians who dispersed throughout Europe between the 8th and 11th centuries, a few fundamental questions remain unanswered.

Among them is the question of their grooming and style: how did this historic group of pirates and traders wear their hair?

Now, a discovery long hidden within the archives of Denmark’s National Museum could finally provide clues by offering historians a rare glimpse at a Viking “portrait,” revealing a surprisingly well-kept individual.

A Forgotten Discovery Resurfaces

The rediscovery of this curious artifact, known as the Flygstad Figurine, was made by Peter Pentz, the curator of Denmark’s National Museum. While combing through some of the museum’s archives, he located a small figurine depicting a noticeably well-groomed man.

It soon dawned on him that the one-inch-tall object was most likely a gaming piece, which would have been used by Vikings in the tenth century. However, this recognition of the artifact’s purpose only deepened its mystery, since the appearance of the individual it represented seemed distinctively unlike our general conception of how Vikings looked.

“When I came across him in one of our storage rooms a few years ago, I was really surprised,” Pentz recently said of the discovery. “He just sat there, looking directly at me, and I had never before seen such a Viking, not in the many years I’ve been at the museum.”

The piece consists of the tiny head and torso of a bearded man, whose facial hair appears to be braided. Along the sides of his face are sideburns, as well as a moustache with curled ends; the man’s hair is evenly parted, with wavy strands that descend the sides of the head around his prominently protruding ears.

However, the deeper history of this unusual artifact reveals an even more intriguing story, along with new perspectives on the way these ancient Scandinavians looked and presented themselves.

Discoveries in a Viking Warrior’s Grave

The artifact’s history can be traced back to discoveries made before the nineteenth century, when excavations in the late 1700s were underway at a burial site in southeastern Norway near the appropriately named locale of Viken.

There, among the items entombed within a Viking warrior horse grave near Norway’s famous Oslofjord, had been the tiny and unusually well-trimmed figurine. Placed in storage for safekeeping, the small artifact was given the label of item “No. 589,” becoming one of the first few hundred items ever housed within the museum.

Ultimately, the tiny item was forgotten, and it remained hidden in the museum’s collection for more than two centuries. Now, out of the more than two million artifacts that have accumulated in the facility over the years, this tiny homage to Viking style, grooming, and gaming has finally resurfaced.

A Tenth-Century Gaming Piece

Pentz and his colleagues say the item was probably used as part of the Viking-era board game known as Hnefatafl, part of a broader family of amusements known as Tafl games that featured checkered boards similar to modern chessboards.

Beyond merely being an implement of tenth-century gaming, the specific features on the tiny artifact could reveal much more about Viking men from the period in question.

“We haven’t had any detailed knowledge about Viking hairstyles, but here, we get all the details—even the little curl above the ear is marked,” Pentz recently said.

“This is the first time we see a figure of a male Viking with his hair visible from all angles,” he added.

The uniqueness of the small character could suggest that he was more than just your average Viking—the elegance of his visage may even suggest he was a member of royalty, with possible identifications including the Viking king Harald I, who reigned during the late 900s C.E.

One thing is clear, however: the Flygstad Figurine is now causing scholars like Pentz to fundamentally rethink past ideas about how Vikings looked.

“If you think of Vikings as savage or wild, this figure is proving the opposite,” says Pentz.

“He is very well-groomed,” Pentz added.

The rediscovery of the Flygstad Figurine was recently detailed in a study, titled, “Understanding the Flygstad (Fløgstad) Figurine: Gaming Pieces, Kings, Gender and Fertility Rites,” which appeared in Medieval Archaeology.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

Physicists report the discovery of new evidence for a mysterious quantum state in an unusual class of materials, in findings that could illuminate a long-running debate over how these systems transition into superconductivity.

In physics, symmetry breaking refers to processes in which a symmetric state collapses from its initial state of disorder into a more ordered one, albeit now possessing less symmetry.

The new research findings reveal evidence that time-reversal symmetry, a fundamental kind of symmetry in nature, appears to be broken at temperatures significantly higher than previously recognized.

The research was detailed in a recent study published in Nature Physics.

Mysterious Kagome Metals

In their study, an international team of researchers led by a team at the Korea Advanced Institute of Science and Technology focused on what are known as kagome metals—a variety of ferromagnetic quantum materials possessing unique qualities.

For their study, the researchers used a specific kagome metal called Cesium Vanadium Antimonide (CsV₃Sb₅), a novel material first discovered in 2021 by researchers at UC Santa Barbara’s NSF Quantum Foundry.

The researchers found that during experiments with the material, which is recognized as a candidate superconductor, CsV₃Sb₅ showed indications that time-reversal symmetry was broken at temperatures significantly higher than previously recognized.

This is significant because it is suggestive of an elusive phenomenon physicists call loop-current order, which describes a state in which the circulation of electrons throughout a material occurs in persistent microscopic loops.

A Signal Emerges

Using an advanced photoemission technique, the team was able to uncover subtle differences in the way electrons respond to circularly polarized light, which is light that is produced using an electric field vector that rotates in a circle as the light wave propagates, equaling one complete rotation for each wavelength.

Based on the team’s measurements, a distinctive signal emerged, which they say is consistent with a time-reversal symmetry-breaking state, meaning that their observations provide what may be the best experimental evidence to-date for an exotic quantum state of matter known as loop-current order, wherein electrons spontaneously assume microscopic wave-like formations.

Loop-current order in kagome metals has been an ongoing area of study for physicists, and the team’s new findings offer what may be the best evidence yet uncovered.

Exotic States and High-Temperature Superconductivity

One reason the team’s findings are so significant is that their results offer some clarity for the otherwise complex sequence of phase transitions that are known to occur within CsV₃Sb₅.

Based on their research, the team now believes loop-current order manifests as the temperature begins to decrease, which is then followed by a periodic rearrangement of electrons known as a charge density wave. Finally, superconductivity then follows, accompanied by the absence of electrical resistance altogether.

Fundamentally, the team’s work could offer new insights into the behavior and characteristics of strongly correlated quantum materials, which could hold promise for future studies involving the mechanisms that produce exotic states of matter.

“These insights deepen our understanding of the phase landscape in kagome metals and highlight connections with a correlated system exhibiting analogous transition hierarchy,” the team reports.

In the future, such studies may also help scientists finally attain the long-sought goal of high-temperature superconductivity, whereby materials capable of conducting electricity with zero resistance, and at temperatures above 30 K (-243°C), helping to reduce the current expenses associated with cooling systems required for superconducting, and ultimately helping to bring these high-power engineering technologies into commercial viability.

The team’s recent study, “Evidence of time-reversal symmetry breaking above the charge density wave order in a kagome metal,” was published in Nature Physics.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

A hidden biological clock has been discovered by genetic researchers, revealing how proteins act as a timing mechanism that controls living organisms’ growth into adulthood.

Cold Spring Harbor Laboratory (CSHL) researchers in New York revealed their findings in a recent paper published in the Proceedings of the National Academy of Sciences, identifying how a feedback circuit between the proteins MYRF-1 and LIN-42 functions as the worm genome’s master developmental clock.

Their research focused on the worm species Caenorhabditis elegans, revealing how these proteins set the timing of pulses that guide the worm through its development.

A Missing Biological Clock

“Development requires that cells change identity in the correct order while the organism continues to grow. How multicellular animals generate and synchronize this timing information across tissues has remained unclear,” the authors write.

The search for this missing biological clock was the core of the CSHL team’s research. Genetic and developmental problems are often expressed as a failure of developmental processes to initiate, which could be tied to problems with internal timing sequences that organize such behaviors. This marks the first time researchers have discovered a non-repeating biological clock.

“This is the central clock for all cells in the worm,” explained co-author Christopher Hammell. “It’s responsible for coordinating a finite series of sequential pulses of gene expression that must occur only once, and in order, for proper developmental progression. It’s like a ratchet. It turns genes on and off multiple times during development, but ultimately, it’s only going in one direction.”

Exploring the Genetic Issues

CSHL researchers paired the modern AI tool AlphaFold with more traditional genetic research techniques, such as protein sequencing, molecular experiments, and DNA sequencing, to identify MYRF-1’s role in the worm’s development.

The team found that protein signals both initiate and terminate developmental stages, keeping growth on track. MYRF-1 pulses fire first, then activate LIN-42, which determines the strength and duration of the timing pulses. This biological clock activates stage-specific regulatory RNAs and synchronizes developmental checkpoints, creating a rhythmic gene-regulation metronome that enforces the irreversible nature of growth and molting. 

In tests to confirm how this biological clock operates, researchers discovered that blocking MYRF-1 expression disrupts the worms’ development cycle.

Understanding the Rhythm of Growth

“We’ve never seen anything like this before,” Hammell says. “MYRF-1 is part of this master regulatory clock for all cells, but it’s also acting as a key maker and the master key for each stage of growth. Without the right key for each stage, development hits a wall and can’t progress.”

The researchers say that understanding how these proteins interact to create cellular clocks that guide development will help researchers better understand cell growth, progression, and differentiation.

“The MYRF-1/LIN-42 circuit runs in all cells,” Hammell says. “And every one of these independent cellular clocks appears to be in sync when you watch normal development. But are they communicating with each other? We’ve never thought deeply about that question before.”

A better understanding of these clocks could offer potential routes to cures for genetic and developmental issues by allowing medical science to jump-start processes that fail to initiate naturally.

Fundamentally, by restoring synchronization of these growth, development, and differentiation processes, scientists and medical practitioners could see better future success in alleviating certain genetic conditions.

The team’s recent paper, “A Molecular Timer Couples Organism-Wide Temporal Identity to Developmental Checkpoints,” appeared in Proceedings of the National Academy of Sciences on May 6, 2026.

Ryan Whalen covers science and technology for The Debrief. He holds an MA in History and a Master of Library and Information Science with a certificate in Data Science. He can be contacted at ryan@thedebrief.org, and follow him on Twitter @mdntwvlf.

While nuclear fusion holds promise for revolutionizing energy systems of the future, many scientists are also concerned about its potential misuse for secretive weapons development.

Fortunately, a team of physicists at Virginia Tech has a plan for preventing that before it happens, which utilizes an existing variety of particle detection to spot and track down such illicit nuclear development before it becomes a major concern.

The team, led by Virginia Tech researcher Patrick Huber, says that antineutrino detectors could hold the key to preventing misuse of nuclear fusion, as described in new research published in Physical Review Applied.

Antineutrino Detection

Fusion reactors generate large quantities of energy by fusing hydrogen nuclei, which results in powerful neutron emissions. This makes such systems ideal for energy production, since they aren’t reliant on the same kinds of materials used in weapons production.

Still, there are potential concerns, since the neutrons produced by fusion reactors could potentially be used to convert uranium-238—the most common isotope of uranium found in nature—into plutonium-239. The latter isotope is the primary fissile component used in the production of nuclear weapons (along with another variety of uranium isotope: uranium-235).

Given the abundance of uranium-238, scientists warn of the potential for seemingly innocuous fusion reactors being used for the generation of plutonium-239. The only way to prevent this from happening is the use of monitoring systems that could detect such activity.

Fortunately, such detection systems already exist.

The Hunt for Illicit Plutonium Production

According to Huber and his team, antineutrino detectors could hold the key to overcoming this problem.

As one of the byproducts of nuclear reactions, antineutrinos—the very low-mass, chargeless neutrino variants (essentially the antimatter counterparts of neutrinos) can neither be blocked using shielding, nor can they be produced by any known non-nuclear processes.

Because of this, they offer a perfect source for detecting nuclear power generation, including those being operated covertly by any potential bad actors.

The Footprints of Antineutrinos

Given the antineutrino “footprint” produced by the fusion process, Huber and his colleagues used simulations to determine if the signal produced by uranium-238’s absorption of neutrons, which releases antineutrinos as they become split into smaller nuclei, compared with normal nuclear reactor operation. They also used their simulations to make comparisons to another known source of antineutrinos: emanations coming from space.

“We find that even a relatively small detector should be able to confirm production rates of a few kilograms of plutonium over 30 days, despite the cosmogenic background and the antineutrino emissions associated with neutron activation of reactor components,” Huber and the team write in their new paper.

Any such detector could also be operated at a considerable distance from the source reactor, which would make such detection systems practical for use at various facilities.

Fundamentally, the team believes the method their work describes could greatly promote efforts to curb the proliferation of illicit nuclear systems for use in making weapons.

The findings were reported in the recent paper, “Detectability of covert fissile material production in nuclear fusion reactors via antineutrino emissions,” by Patrick Huber and co-authors Alexander Glaser and Robert J. Goldston, which appeared in Physical Review Applied on June 2, 2026.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

For the first time, astronomers have distinguished between the morning and evening atmospheres of a single planet, revealing two remarkably different environments at its edges. WASP-121 b is a gas giant that orbits extremely close to its star, resulting in one hemisphere exposed to temperatures approaching 2,500 degrees Celsius while the opposite side remains in constant darkness.

A research team from the Max Planck Institute for Astronomy used the James Webb Space Telescope to provide observational evidence for a phenomenon that models had previously predicted. The boundary regions between day and night on tidally locked planets can exhibit distinct temperatures and chemical compositions.

The recent findings appeared in a study published in Nature Astronomy.

A World Stuck in Time

WASP-121 b is part of a group of gas giants known as hot Jupiters. These massive planets orbit their stars in just a few days and eventually become locked in place by gravity. Tidal forces keep one side facing the star at all times, while the other side never sees daylight.

“WASP-121 b is particularly extreme,” said co-author Tom Evans-Soma of the University of Newcastle, Australia. “Average temperatures on the dayside hemisphere are around 2,770 Kelvin, while those on the nightside are closer to about 1,000 Kelvin.”

The difference in temperature between the two hemispheres, which is about 1,775 degrees Celsius, makes WASP-121 b one of the most thermally extreme exoplanets known. The regions at the boundary between day and night, called terminators, are where the planet experiences constant morning or evening conditions. Scientists expected these areas to have different atmospheric properties, but only with the precision of JWST could these differences be directly observed.

Mapping the Atmosphere

The researchers used a method based on the planet’s transit across its star to study these differences. As WASP-121 b passes in front of its star, it rotates by about 30 degrees, which means that different parts of its atmosphere can be observed during each transit. By tracking how infrared starlight filters through the atmosphere over time, the team reconstructed how temperature and chemical composition change across different longitudes.

“By measuring how starlight absorption changes as WASP-121 b rotates, we probe its atmosphere longitude by longitude,” said lead author Cyril Gapp of MPIA. The observations not only confirmed what models had predicted, but also showed that the differences between the two terminators are even greater than expected.

Two Different Skies

The evening side of the planet’s terminator absorbs more starlight than the morning side. Powerful eastward winds sweep heat from the scorching dayside toward the nightside, with the evening region getting the first blast of this warmth. This extra heat causes the atmosphere there to puff up, allowing it to absorb even more starlight, as the observations showed.

Chemical measurements backed up these findings. Carbon monoxide absorption increased as the hotter regions of the evening came into view near the end of the transit. Water showed a different pattern. Rather than simply decreasing with higher temperatures, the researchers interpret the result as evidence that water molecules in the upper atmosphere are breaking apart, likely due to the intense heat at the evening terminator. This points to a real chemical change, not just a shift in molecular location.

The Cloud Problem

The morning side shows a different environment. Although models predicted a difference between the two terminators, they did not fully explain why the morning side appears cooler and more opaque. The most likely explanation involves clouds that are unlike those on Earth.

At the morning terminator, air comes in from the cold nightside. Temperatures may be low enough for silicate and mineral compounds to turn into tiny particles, forming clouds that block infrared radiation from below. This makes the atmosphere appear cooler than it really is underneath.

When the team adjusted their models to account for these clouds, the results more closely aligned with their observations. Still, confirming exactly how these clouds form and behave will require more advanced modeling, as cloud formation and evaporation in such extreme environments remain a major puzzle in exoplanet science.

A Method Ready to Scale

WASP-121 b has been the subject of previous studies, but JWST now enables astronomers to examine its atmosphere in detail, section by section. This approach is now also available for use with other exoplanets.

The team has already found other ultra-hot gas giants with the right temperatures and orbits for similar analysis. Using this method on other planets will help astronomers compare atmospheric conditions and deepen our understanding of extreme planetary environments.

Austin Burgess is a writer and researcher with a background in sales, marketing, and data analytics. He holds an MBA, a Bachelor of Science in Business Administration, and a data analytics certification. His work focuses on breaking scientific developments, with an emphasis on emerging biology, cognitive neuroscience, and archaeological discoveries.

An international team of researchers led by Dr. Liora Kolska Horwitz of the Hebrew University of Jerusalem’s National Natural History Collections, working at the site of the oldest dated intentional use of fire by ancient human ancestors, South Africa’s Wonderwerk Cave, has found new evidence pushing that date even earlier into prehistory.

The research team behind the potentially history-altering findings said the discovery, which suggests that ancient hominins intentionally controlled fire, resulting in charred animal bones sometime between 1.07 and 1.79 million years ago, provides researchers with previously unavailable insights into how our ancestors first began to harness one of the most important tools in the evolution of human society and culture.

The study also introduced the archaeological community to a promising new method for analyzing burned bone samples by monitoring its light-emitting properties.

Intentional Use of Fire Provided Human Ancestors with a Critical Tool

According to a statement announcing the study, Dr. Horwitz, who is co-director of the Wonderwerk Cave project with Prof. Michael Chazan at the University of Toronto, and colleagues note the historical significance of fire, ranging from warmth and predator protection to extended daylight and the cooking of meat. However, historians have struggled to identify a single moment or historical period where humanity’s ancient ancestors first started to use fire intentionally.

“Evidence of fire from such ancient sites is often subtle and difficult to detect,” Dr. Horwitz explained.

Before the new analysis, the oldest agreed-upon evidence for intentional fire use also came from Wonderwerk Cave. Situated within the Kalahari Desert of South Africa, the cave provided evidence placing fire use to approximately 1 million years ago.

While that study used the most advanced techniques available, the team behind the new study decided to employ a non-invasive process that involves illuminating ancient bone fragments with specific wavelengths of light to determine whether they had been exposed to intense heat. In cases where bones have been heated to fire-like temperatures, the right wavelength of light will cause them to glow.

Remains Likely Left by Homo Erectus

Because evidence from ancient sites is scarce, the team’s non-invasive technique allowed them to study tiny fossilized rodent bones left in the cave by owls without damaging them. The team noted that using remains that accumulated naturally on the ancient cave floor provides an “independent, non-anthropogenic record” of ancient events within the local area.

After exposing the ancient bone to specific wavelengths of light, the team found what they described as “clear signs of burning.” Dr. Horowitz confirmed the findings, noting that the team’s analysis reveals “fire was repeatedly present deep inside Wonderwerk Cave.”

Because the deposits were found over 30 meters deep in the cave, the team ruled out wildfires as a possible source of combustion. The layer also lacked bat guano remains, which the team noted “rules out spontaneous combustion.”

A chemical analysis of the charred bones dated them to between 1.07 and 1.79 million years ago, redating the 2012 findings. Critically, the evidence for ancient fire use was in an archaeological layer “associated with artifacts” from the initial Acheulean period, which is consistent with the dating. If correct, this would make the likeliest early human ancestor that used fire Homo erectus.

Although the findings appear to extend the chronology of one of the earliest known records of fire use associated with hominins by as much as 790,000 years, the research team said the findings do not suggest that these early proto-humans could create fire “at will.” Instead, the likeliest scenario involves early human ancestors collecting fire from natural sources, such as lightning-induced wildfires on the African savanna, and bringing it into the cave.

“The early humans introduced this fire into the cave on multiple occasions and maintained it there before it eventually died out,” the team’s statement explained.

The team did not immediately pinpoint what methods these early hominins used to maintain a burning fire. However, they suggested that burning owl pellets as additional fuel may inadvertently have scorched the rodent bones.

A New Tool for Identifying Traces of Burning

When discussing the implications of the new, earlier date for the first intentional use of fire, Dr. Horwitz said the discovery shows that early human ancestors “were not simply passive observers of natural fires,” but instead were “actively engaging with fire and incorporating it into their lives.”

Beyond offering an earlier date range for early fire use, the work provides clues into how our ancestors used fire before they could make it on their own. The study also debuted a new, non-invasive, portable tool for investigating early fire use, which the study authors note “can be applied to large collections of fossils without damaging them.”

“Our study provides new tools for identifying traces of ancient burning,” Dr. Horwitz explained, with the team adding that application of this new technique to sites around the world “may help clarify the origins and development of one of the most consequential technologies in human history.”

The study “New evidence for Early Pleistocene use of fire at Wonderwerk Cave (South Africa)” was published in PLOS One.

Christopher Plain is a Science Fiction and Fantasy novelist and Head Science Writer at The Debrief. Follow and connect with him on X, learn about his books at plainfiction.com, or email him directly at christopher@thedebrief.org.

One of nature’s most mysterious predators isn’t a mammal stalking remote forests or jungles, nor any large, finned creature lurking in the ocean depths: it is a bizarre little plant that grows only in certain wetland areas along the East Coast of the United States.

With the distinctive hinged leaves that it uses to capture insects, the Venus flytrap is one of nature’s most curious offerings. The small bog-dwelling plant owes its success to the way it can generate an inviting aroma with the nectar it produces, which lures insects. Then, with the help of tiny follicles that act as triggers, the insects become trapped within the flytrap’s leaves as they close like jaws around its prey.

Scientists have long been perplexed by exactly how these plants can react quickly enough to capture even some of the fastest flying insects. Even Charles Darwin seemed baffled by these curious examples of carnivorous flora, describing them as “a plant [that] should secrete, when properly excited, a fluid containing an acid and ferment, closely analogous to the digestive fluid of an animal.”

While the exact mechanism that allows the mysterious Venus flytrap to carry out its distinctive method of feeding has long remained unknown, new research is finally shedding light on the mystery.

The Venus Flytrap’s Secret is Finally Revealed

According to recent experiments detailed in a new study, when the hair-trigger mechanism is activated on these plants, cells on the jaw-like leaves soften, which initiates the closing movement within fractions of a second, trapping any insects unlucky enough to have landed searching for nectar.

Dr Yoël Forterre, a physicist at the French National Centre for Scientific Research (CNRS) and Aix-Marseille University, says that this movement had been so mysterious to Darwin that “he was convinced that the plant had a muscle inside, but plants do not have muscles and they do not have nerves.”

“For more than a century there have been many hypotheses,” Forterre, senior author of the recent study, said. “It’s very surprising that plant cell walls can tune their mechanical properties so fast.”

The Challenge of Measurement

One of the primary issues with resolving the plant’s curious mechanism involved overcoming challenges associated with measuring such a remarkably fast system of movement, let alone one in a plant, which possesses none of the usual mechanisms nature relies on for such activities.

Equally perplexing is that the Venus flytrap seemingly recognizes when an accidental trigger has been initiated, rather than a successful capture of an insect.

“If you close it accidentally with a drop of water, it will close and then reopen the next day,” Forterre says. “If it catches an insect, it has to digest it and dissolve the skeleton, which will take several weeks.”

In experiments Forterre and his colleagues performed, dental glue was used to secure the plant’s leaves, which allowed for the normal trigger mechanisms to be engaged, but left the plant’s leaves open throughout the process.

Past research had already shown that electrical signals had been detected coinciding with the manipulation of the trigger hairs present on the plant’s leaves, in which this sudden surge of electricity “activates” the plant’s closing mechanism within a fraction of a second.

Solving the Flytrap’s Mystery

Applying a new approach, Forterre and colleagues used the metallic tip of a nanoindenter, devices used to make very small mechanical measurements. Applying the device to the outer leaves revealed that its normal stiffness appeared to soften significantly once the hair mechanisms were triggered.

The reason this occurs, according to Forterre, is that the cells themselves temporarily become more flexible. Past theories suggested that the movement was initiated by the movement of water contained within the leaf.

The newly-identified mechanism reveals a process very similar to the function of a plunger, which, if inverted, will flip back to its normal position when pressure is applied.

Forterre says he is unaware of any similar plant in nature that displays such unusual mechanical properties, which he says allows the Venus flytrap to initiate a “very rapid change of mechanical properties of the cells.”

“I’ve been obsessed by this for 20 years,” Forterre recently told The Guardian, noting that “as a physicist, I thought we should understand the motor, the forces.”

Now, thanks to his team’s findings, one of the plant kingdom’s strangest inhabitants has finally revealed its secrets.

The team’s new study, “Fast cell wall softening causes Venus flytrap closure,” appeared in Science on June 11, 2026.

Micah Hanks is the Editor-in-Chief and Co-Founder of The Debrief. A longtime reporter on science, defense, and technology with a focus on space and astronomy, he can be reached at micah@thedebrief.org. Follow him on X @MicahHanks, and at micahhanks.com.

Ancient mycorrhizal fungal networks, consisting of a billion astronomical units’ worth of roots, have finally been mapped by scientists, providing insight into their connections, which are essential to climate regulation and plant sustenance.

Mycorrhizal fungi grow in an arbuscular formation, meaning they take on a branching tree-like structure of tubular cells called hyphae, which pull carbon from the atmosphere to aid in climate regulation.

The international team presented their work in a recent paper published in Science, which estimates the distribution and mass of these enormous fungal networks and provides an interactive visualization tool that offers crucial insight into threats to these systems, which are essential to Earth’s health.

Mapping Fungal Networks

The new research brings both encouraging and concerning findings, highlighting regions where fungal networks remain robust while also identifying areas under increasing threat.

Although previous studies have attempted to map the diversity of these fungi across the globe, this is the first effort to predict and visualize their density and biomass on a planetary scale. According to the team’s estimates, the network extends for approximately 110 quadrillion kilometers, with roughly 40% located beneath grasslands.

Using more than 16,000 soil cores collected worldwide, researchers assembled a massive fungal dataset. They then employed machine-learning models that combined data from multiple biomes to predict the density of arbuscular mycorrhizal fungal networks in unsampled regions. Robotic imaging of more than 300,000 living, laboratory-grown hyphae allowed the team to calibrate and validate their models.

“It is hard to overstate the importance and enormity of these fungi,” said lead author Dr. Justin Stewart, with the Society for the Protection of Underground Networks (SPUN). “There could be up to 10 meters (32 feet) of mycorrhizal network in just a teaspoon of soil.”

Earth’s Circulatory System

Because it transports carbon, water, and nutrients underground, scientists have likened the network to our planet’s circulatory system, with a flow rate of up to 120 micrometers per second. About 70% of Earth’s plant species thrive on a symbiotic relationship with the arbuscular mycorrhizal fungi network.  The network can provide over 80% of a plant’s phosphorus and increase the root foraging area 100-fold. 

The network subsists on carbon waste produced by plants, while providing them with water and nutrients in return. By pulling in roughly 4 billion tons of CO2 into the ground every year, mycorrhizal fungi mitigate an amount corresponding to roughly 11% of human emissions.

Unfortunately, grasslands, where the network thrives most, are among the least protected environments on Earth and are being rapidly converted to farmland. According to the study team, cropland has only about half the lower network density of regular land, which the researchers worry may negatively affect how soil stores carbon, cycles nutrients, and resists stress.

Continuing Fungal Network Research

“It is important to remember that these maps are living documents. This is a first attempt at building a foundational model of Earth’s fungal networks infrastructure, but it is not complete,” Stewart recently told The Debrief. “There are other types of mycorrhizal fungi that still need to be mapped in more detail, and other fungal structures, such as spores, that are also critical to understanding how these organisms persist, move, and respond to environmental change. Likewise, we need more data in regions that have been poorly sampled.”

The team says the study represents a major advance for climate science, a field in which fungi have often been overlooked in discussions about conservation and resilience. Researchers hope the findings will encourage a more comprehensive understanding of the role fungi play in maintaining healthy ecosystems.

“A major goal now is to make these kinds of data useful for decision makers. Fungi are still rarely included explicitly in climate, biodiversity, and land-use agendas, even though they are central to how ecosystems move carbon and nutrients,” Stewart adds. “We want to help ‘course-correct’ by building a clearer picture of the underground systems that support life aboveground.”

The paper, “Global Density and Biomass of Arbuscular Mycorrhizal Fungal Networks,” appeared in Science on June 11, 2026.

Ryan Whalen covers science and technology for The Debrief. He holds an MA in History and a Master of Library and Information Science with a certificate in Data Science. He can be contacted at ryan@thedebrief.org, and follow him on Twitter @mdntwvlf.

Scientists from Goethe University, Frankfurt, studying alternatives to black holes have suggested a mathematically viable formation mechanism for one proposed alternative called a ‘Gravastar.’

Although the team behind the newly proposed gravastar formation mechanism conceded that black holes still represent the simplest and most natural solution to gravitational collapse, they also suggest that the physics behind the alternative, which doesn’t require a single point where spacetime curves infinitely, called a “singularity,” can make them “easier to accept” than black holes.

If correct, and some or all black holes are, in fact, gravastars that mimic their expected properties, the work would establish a valid formation mechanism that could rewrite decades of accepted science and open a new field of research dedicated to understanding this previously misunderstood phenomenon.

Meet Gravastar: The Black Hole Mimicker without a Singularity

According to standard cosmology theories, black holes form when extremely massive stars stop generating energy, allowing the force of gravity to take over and collapse the remaining matter into a single point, or singularity. Unfortunately, the research team behind the new study notes that “the laws of physics break down” within the singularity, making the formation of the resulting black hole a difficult phenomenon to predict.

“How can spacetime be curved infinitely at that point, the singularity?” asks the team’s statement announcing the new approach. They also note that no information escapes a black hole, including light, making studying its inner workings effectively impossible, and opening up the possibility that “black holes are in fact entirely different objects.”

Some options have been proposed, including ‘horizonless’ black hole mimickers. The team notes that these proposed options are “mathematically consistent alternatives” that also address the physics challenges posed by traditional black holes. 

Still, how these alternative objects form has remained largely unclear. The research team said this lack of a formation mechanism constitutes “a significant open problem” since understanding how they form is the “first step” to determining if they truly exist.

New Model Creates a ‘Big Bang’ Inside a ‘Mini-Universe’

In the new formation model, theoretical physicists Daniel Jampolski and Theoretical Astrophysics Professor Luciano Rezzolla from Goethe University showed that the collapse of a dying star may not go far enough that it reaches the point of no return, where “the collapse to a black hole is inevitable.”

Instead, the collapse slows down near a point scientists call the Schwarzschild radius, then stops. The result is what the team termed a “miniature universe” within the collapsing matter, which they compared to the dynamics of the Big Bang, which most theorists agree formed the entire universe.

Since the universe’s expansion was driven by dark energy, the new model proposes that the dark energy within the mini-universe establishes an “equilibrium” with the counteracting force of gravity, therefore halting the collapse of the star “before a black hole can form.”

“The Big Bang of the emerging universe can unfold once the star has already collapsed almost to the point of becoming a black hole,” explained Jampolski, who discovered the black hole alternative gravastar solution in his master’s thesis while under the supervision of Professor Rezzolla.

Maintaining an Unbiased Approach Toward “What We Do Not Know”

When discussing the impact of their proposed black hole alternative formation model, Jampolski said that from a mathematical and physics standpoint, it is “easier to imagine that the Big Bang occurs only at a very late stage, when matter has already been compressed to an extreme degree, thereby giving rise to new effects.” The team also notes that the unresolved behavior of matter in this environment “leaves room for new physics.”

Although the team’s model offers a mathematically sound formation for an alternative to black holes, Rezzolla notes that the search for gravastars or other alternatives “should not suggest a skepticism towards black holes,” which, he adds, “still represent the most natural and simplest solution to the fate of gravitational collapse.”

Instead, the Goethe professor explained, his general role as a scientist and his specific discipline as a theoretical physicist make it essential that he and his colleagues “maintain an unbiased approach towards what we do not know and hence explore both the accepted wisdom and the more exotic interpretations.”

“History teaches us that it is not unusual for the latter to become the former,” the professor added.

The paper “Formation of gravastars” was published in the journal Physical Review D.

Christopher Plain is a Science Fiction and Fantasy novelist and Head Science Writer at The Debrief. Follow and connect with him on X, learn about his books at plainfiction.com, or email him directly at christopher@thedebrief.org.