In a groundbreaking advancement that could reshape the landscape of bioelectronic medicine, researchers have developed a wirelessly powered, bioresorbable electrical stimulation system with unprecedented programmable control over stimulation waveforms. This innovation integrates tissue-penetrating near-infrared (NIR) light to modulate electrical currents with precision, harnessing a novel bioresorbable silicon phototransistor as the cornerstone of its operation. Pioneering beyond earlier monophasic pulse devices, this technology allows for the delivery of monophasic, biphasic, and polyphasic stimulation patterns, significantly enhancing the versatility and therapeutic potential of implantable electrical stimulators designed to dissolve harmlessly after use.

Traditional electrical stimulators implanted in biological tissues have largely relied on wired connections or bulky batteries, impeding patient mobility and often necessitating additional surgeries for device removal. Bioresorbable devices emerged as a solution to these challenges by safely degrading in the body over time, eliminating the risks associated with permanent implants. However, these earlier systems primarily delivered monophasic pulses, limiting therapeutic precision and adaptability in complex treatments. The innovation reported by Kim, Seo, Wang, and colleagues introduces a new paradigm by integrating wireless power transfer via NIR light and programmable waveform control within a fully bioresorbable platform, thus extending the functional range and easing the clinical management of bioelectronic therapies.

Central to this system is the incorporation of bioresorbable silicon phototransistors engineered to serve as optoelectronic modulators within the electrical circuitry. When illuminated by externally applied near-infrared light that penetrates deep into biological tissues, these phototransistors effectively adjust current flows at critical circuit nodes. This optical modulation capability replaces conventional electronic control elements, which often rely on persistent power sources or invasive wiring, thereby enabling the device to operate autonomously while still allowing fine-tuning of stimulation parameters through non-contact optical inputs.

The adoption of near-infrared light as the wireless power and control mechanism is particularly significant. NIR light possesses the ability to penetrate through several centimeters of tissue without causing damage, providing a safe and efficient transmission channel between the external controller and the implanted device. This feature supports programmability in situ, empowering clinicians to tailor electrical stimulation waveforms dynamically after device implantation. Precisely controlling the shape, amplitude, and timing of the electrical pulses is crucial for optimizing therapeutic outcomes in applications such as neuroregeneration and cardiac pacing.

The research team demonstrated the remarkable versatility of their bioresorbable system by successfully delivering a variety of stimulation waveforms. Monophasic pulses, which are unidirectional current flows, serve as a baseline therapy. More complex biphasic and polyphasic waveforms, which alternate current direction and comprise multiple phases respectively, have been shown to minimize tissue damage and improve efficacy in various biosignaling contexts. The ability to generate these sophisticated patterns expands the therapeutic range of the device, potentially enabling treatments that were previously inaccessible using bioresorbable technologies.

In demonstrating practical utility, the device was tested in both small and large animal models, validating its capacity for clinically relevant electrical stimulation regimes. The system was effectively employed in single- and dual-chamber cardiac pacing, a critical intervention for managing arrhythmias and heart block. Through controlled electrical stimulation, the device could synchronize cardiac contractions, a feat crucial for restoring efficient cardiac output. These trials highlight the translational potential of the technology for future human applications, situating it as a promising alternative to current electronic pacemakers that require permanent implantation and battery replacements.

Further extending the functional scope, the researchers utilized the bioresorbable stimulator to activate phrenic neuromuscular pathways to either induce or block diaphragmatic movements. The phrenic nerve controls diaphragmatic excursion, essential for respiration, and its modulation has significant implications for respiratory therapies, such as in patients with spinal cord injuries or central hypoventilation syndromes. By enabling wireless, programmable neurostimulation of the phrenic nerve, the technology offers a minimally invasive approach to manage life-sustaining respiratory functions, with the added benefit of device degradation after the therapeutic window.

The bioresorbable nature of the silicon phototransistors and associated electronics assures that after fulfilling their therapeutic role, the devices gradually dissolve into biocompatible byproducts. This process circumvents the complications related to device explantation surgeries, reducing patient risk and healthcare costs. Moreover, the materials chosen minimize inflammatory responses and tissue irritation, facilitating seamless integration with host biology during the operational phase.

The engineering behind this system represents an intersection of materials science, optoelectronics, and biomedical engineering. The architecture leverages the semiconducting properties of silicon in thin-film, bioresorbable form, combined with circuit design optimized for minimal power consumption and maximal efficiency during NIR irradiation. These multidisciplinary innovations collectively overcome longstanding barriers in the fabrication of transient electronic implants capable of sophisticated programmable functionality.

Controlling the stimulation waveforms via light permits remote adjustment without physical connections, paving the way for real-time therapeutic modulation responsive to patient status or physiological signals. Future iterations could incorporate feedback mechanisms by integrating bioresorbable sensors that monitor tissue response, creating closed-loop systems for personalized medicine. This dynamic adaptability could be transformative in managing chronic conditions requiring variable and responsive electrical stimulation protocols.

This research also addresses one of the fundamental challenges of implantable devices: power delivery. The optical wireless power transfer circumvents the need for bulky batteries or explant procedures, offering renewed device miniaturization potential. Coupled with programmable phototransistors, these innovations enable multifunctional implants that conform to soft tissues and degrade harmlessly, a trifecta crucial for implantation in sensitive organs like the heart and nervous system.

The ability to deliver polyphasic waveforms through a single bioresorbable receiver unit is particularly noteworthy. Conventionally, generating these complex waveforms requires sophisticated circuitry and stable power sources, neither of which are trivial to implement in resorbable devices. The research showcases how optical control unlocks this capability without sacrificing bioresorbability or wireless operation, representing a paradigm shift in transient biomedical electronics.

The successful application of this device in large animal cardiac models bridges a critical gap toward clinical translation. Such models replicate human physiological scales and complexities far more closely than small animals, validating both the efficacy and safety of the system under conditions analogous to human therapies. This demonstration is an essential milestone on the path toward human clinical trials and eventual regulatory approval.

Moreover, the phrenic nerve stimulation experiments illustrate the broader applicability beyond cardiac pacing. Neuromuscular control via electrical stimulation has vast clinical relevance, from restoring motor function to modulating organ systems. The biodegradable, wireless nature of this system makes it especially suited for temporary therapeutic interventions, such as post-surgical recovery or transient disease states, where permanent implants would be unnecessary or undesirable.

While this work represents a major leap forward, ongoing challenges remain, including further optimization of device longevity relative to treatment durations, refinement of light delivery systems to maximize tissue penetration and minimize off-target effects, and integration with advanced biocompatible materials to tailor resorption timelines. Addressing these will be key to broadening the range of clinical applications and ensuring patient safety across diverse scenarios.

Overall, this wirelessly powered, light-controlled, bioresorbable stimulation system emerges as a versatile platform poised to transform bioelectronic therapies. Its elegant combination of programmable polyphasic waveform delivery, wireless operation via near-infrared light, and full bioresorbability addresses critical limitations of current implantable stimulators. By enabling sophisticated, minimally invasive, and transient electrical stimulation paradigms, this technology advances the frontiers of regenerative medicine, cardiac therapy, and neuromodulation, marking a significant milestone in the evolution of biomedical devices.

Subject of Research: Wireless bioresorbable electrical stimulation device with programmable waveform control using near-infrared light

Article Title: A wirelessly powered, light-controlled, bioresorbable stimulation system with programmable polyphasic waveforms

Article References:
Kim, J.U., Seo, S.G., Wang, H. et al. A wirelessly powered, light-controlled, bioresorbable stimulation system with programmable polyphasic waveforms. Nat Electron (2026). https://doi.org/10.1038/s41928-026-01655-8

Image Credits: AI Generated

DOI: https://doi.org/10.1038/s41928-026-01655-8

In a groundbreaking advancement for optoelectronic technology, researchers have unveiled a novel approach harnessing the unique properties of Si₃N₄/n-Si hybrid devices to achieve interface-controlled broadband photodetection. This development promises to revolutionize the efficiency and spectral range of photodetectors, devices integral to a wide array of applications from telecommunications to environmental monitoring. The study, recently published in Scientific Reports, highlights how meticulous control over material interfaces can dramatically enhance device performance, marking a significant leap forward in photodetector design and fabrication.

Photodetectors serve as the eyes of modern electronic systems, converting light into electrical signals that enable everything from digital imaging to fiber optic communication. Traditional photodetectors, however, have long been limited by narrow operational bandwidths and sensitivity constraints, curbing their effectiveness in emerging high-performance applications. By integrating silicon nitride (Si₃N₄) with n-type silicon (n-Si), the researchers have engineered a hybrid platform that deftly overcomes these limitations, exploiting interface phenomena to extend detection capabilities across a broad spectrum of electromagnetic radiation.

At the heart of this innovation lies the strategic manipulation of the Si₃N₄/n-Si interface. Silicon nitride, known for its excellent dielectric properties and chemical stability, acts as both a passivation layer and an optical modulator when interfaced with silicon. This interplay at the atomic and electronic scale shapes charge carrier dynamics, reduces surface recombination losses, and enhances photon absorption efficiency. Such interface engineering ensures that the hybrid device is not only highly sensitive but also capable of operating seamlessly over a wide range of wavelengths, from ultraviolet through visible to near-infrared.

The research team deployed advanced fabrication techniques to precisely control the deposition and interface formation of Si₃N₄ on the n-Si substrate. Utilizing plasma-enhanced chemical vapor deposition (PECVD), they achieved a uniform and defect-minimized nitride layer that adheres perfectly to the silicon surface. This meticulous fabrication step is essential as interface traps, commonly induced by imperfections, can severely degrade photodetector responsiveness and noise levels. By minimizing such imperfections, the hybrid device attains an unprecedented signal-to-noise ratio crucial for sensitive detection tasks.

Optical characterization of the Si₃N₄/n-Si hybrids revealed remarkable broadband responsivity, a parameter quantifying the device’s ability to convert incoming photons across various wavelengths into electric current. The devices demonstrated enhanced photoresponse not only in the visible spectrum but also extended into ultraviolet and infrared regions, surpassing conventional silicon-based photodetectors limited by the bandgap constraints of pure silicon. This broadband sensitivity opens the door to new applications where multispectral light detection is necessary without the need for separate sensors.

One of the pivotal mechanisms for this extended response is the formation of interfacial states that facilitate charge transfer and broaden the spectral detection range. These states effectively lower the energy barriers that typically restrict silicon’s photoresponse, enabling efficient utilization of photons with energies both above and below the traditional silicon bandgap. This effect is modulated by the thickness and stoichiometric composition of the Si₃N₄ layer, parameters finely tuned during device fabrication to optimize performance.

Beyond spectral coverage, the temporal response of these hybrid photodetectors is equally impressive. The devices exhibited fast switching times and low dark currents, essential characteristics for high-speed communications and low-light detection scenarios. Reduced dark current, a measure of unwanted noise in the absence of illumination, directly correlates with enhanced sensitivity, thereby allowing the detection of weak optical signals with unprecedented clarity.

Integration compatibility is another striking advantage of the Si₃N₄/n-Si system. Both materials are well-established in mainstream semiconductor manufacturing, meaning that this innovation can be seamlessly incorporated into existing silicon-based electronic platforms. This compatibility facilitates scaling production while maintaining cost efficiency, a critical factor for commercial adoption in industries such as consumer electronics, healthcare diagnostics, and environmental sensing.

The research also delves into the underlying physics governing the device operation. Through combined experimental and theoretical analyses, the study elucidates charge carrier transport across the interface, the role of interface dipoles, and modulation of the built-in electric field that directs photogenerated carriers. Such detailed understanding offers a roadmap for further improvements, potentially inspiring future hybrid systems with tailored optoelectronic properties suitable for specific industrial applications.

In terms of real-world application, these hybrid photodetectors could significantly enhance the performance of cameras, optical coherence tomography devices, and remote sensing instruments. The broadband detection capability reduces the reliance on multiple sensors, simplifying device architectures and improving reliability. Additionally, their fast response times and stability under various environmental conditions are promising for deployment in harsh or variable environments, including space exploration and autonomous vehicle navigation.

This research marks a notable shift in photodetector technology by emphasizing interface engineering to transcend inherent material limitations. By capitalizing on the complementary properties of Si₃N₄ and n-Si junctions, the study injects fresh momentum into the pursuit of universal photodetectors that excel in speed, sensitivity, and spectral range. The findings underscore the vast potential lying in hybrid material systems, motivating continued exploration into interface-controlled photonic devices.

Looking forward, the researchers suggest exploring further modifications to the Si₃N₄ layer such as doping or introducing nanoscale structuring to tailor the interface behavior. Such advancements may unlock new functionalities like polarization sensitivity or even tunable wavelength selectivity, pushing hybrid photodetectors beyond current performance frontiers. These directions align with the broader scientific quest to develop smarter, more adaptable optoelectronic components for the next generation of information and sensing technologies.

In conclusion, the Si₃N₄/n-Si hybrid photodetector described in this study represents a pivotal development that combines material science innovation with practical engineering to address longstanding challenges in photodetection. Its broadband capability, operational stability, and integration potential poise it as a top candidate for a wide spectrum of applications demanding fast, efficient, and reliable light detection. As industries continue to demand more from photonic devices, such interface-controlled systems stand out as a transformative solution poised to redefine the future of photodetection technology.

---

Subject of Research: Interface-controlled broadband photodetection in Si₃N₄/n-Si hybrid devices

Article Title: Interface-controlled broadband photodetection in Si₃N₄/n-Si hybrid devices

Article References:
Manfo, T.A., Yıldız, D.E., Bağcı, C. et al. Interface-controlled broadband photodetection in Si₃N₄/n-Si hybrid devices. Sci Rep (2026). https://doi.org/10.1038/s41598-026-57951-y

Image Credits: AI Generated

Watching a seabird burst out of the ocean or a mobula ray launch itself into the air makes the transition from water to sky seem effortless. For drones, however, performing the same maneuver is extremely difficult. Researchers at the University of Central Florida (UCF) are now studying how to make this challenging transition smoother and […]

The post How drones could leap from water into the air like birds and rays appeared first on Knowridge Science Report.

A major security flaw that allowed attackers to impersonate other people in text message conversations has finally been fixed across the United States, thanks to the work of computer scientists at the University of California San Diego. The vulnerability affected both Android and iPhone users and involved nearly all major wireless carriers, including Verizon, T-Mobile, […]

The post Hidden texting flaws let attackers impersonate contacts on iPhones and Androids appeared first on Knowridge Science Report.

A team of researchers in South Korea has developed a new type of transparent OLED technology that could help improve future augmented reality (AR) glasses, smart windows, vehicle displays, and other advanced electronic devices. The research was led by Professor Yongtaek Hong and his team at the Department of Electrical and Computer Engineering at Seoul […]

The post Transparent OLED advance could power smarter windows, cars, and wearable displays appeared first on Knowridge Science Report.

A new passive technology could help future wireless networks reach places where signals struggle today. Dead zones are one of the most persistent problems in wireless communications. Whether it’s a basement office, a warehouse aisle, a tunnel, or a crowded indoor venue, signals often struggle to reach every corner. The challenge is expected to grow [...]

As artificial intelligence, cloud computing, and online services continue to grow, the demand for faster and more energy-efficient computer hardware is rising rapidly. Now, researchers in Japan have developed a new type of magnetic memory that can be rewritten using a single pulse of laser light instead of electric current, potentially paving the way for […]

The post Scientists use a single flash of light to rewrite magnetic memory 1,000 times faster appeared first on Knowridge Science Report.

Just like snowflakes, no two TikTok For You pages look alike. And that is intentional. The social media site’s highly personalized—and black box-like—recommendation algorithm has long been considered its “secret sauce,” after all. But how much control do the platform’s billion-plus daily users have over the topics that show up on their feed? The social […]

The post TikTok’s ‘Not Interested’ tool beats swiping, but effect may quickly wear off appeared first on Knowridge Science Report.

Falling overboard from a ship is one of the most dangerous emergencies at sea. Every minute matters, and the chances of survival can quickly decrease as people become exhausted, suffer from cold water exposure, or drift far away from the vessel. Researchers at the Technical University of Denmark (DTU) are developing a new autonomous rescue […]

The post Smart rescue drone could save people who fall overboard at sea appeared first on Knowridge Science Report.

A team of researchers from the Massachusetts Institute of Technology (MIT) and other institutions has developed a new way to improve the performance of powerful electronic devices by using an ultrathin layer of diamond. The breakthrough could help future technologies such as 6G wireless networks, satellite communications, radar systems, and even data centers operate faster […]

The post Ultrathin diamond layer solves major heat problem in future 6G devices appeared first on Knowridge Science Report.

A novel technology can create nanoscale sensor structures up to 10X smaller than legacy MEMS sensor solutions.

© Nanusens

Electronic Design editors reveal what technologies and products stood out to them at the recent APEC 2026.

© EB2B

Researchers at the University of Cambridge and startup company GlitterinTech have developed a tiny, low-cost device that could bring powerful chemical sensing capabilities to wearable technology. The new device is an optical spectrometer—a tool that analyzes how light interacts with materials. Spectrometers are widely used in science, medicine, manufacturing, and environmental monitoring because they can […]

The post New $10 spectrometer chip could turn smartwatches into health monitors appeared first on Knowridge Science Report.

A wearable lens used the retina to reach mood circuits deep in the brain and reverse depression-like changes in mice.

Scientists have finally packed a laboratory-class ultrafast laser onto a tiny photonic chip. Ultrafast lasers generate bursts of light that last only a few hundred femtoseconds, each one just a quadrillionth of a second long. These extremely short pulses are used in a wide range of technologies, including precision manufacturing, eye surgery, and optical frequency [...]

Researchers may have unlocked the future of computing by turning flat silicon chips into densely stacked 3D architectures. For decades, the semiconductor industry has boosted computing power by making transistors smaller and fitting more of them onto a single chip. That strategy has fueled remarkable advances in electronics, but it is now approaching fundamental physical [...]

With a shortage of some components driving up costs of consumer electronics, refurbished devices are an attractive alternative to buying new.

A new MIT-designed lidar chip uses specially engineered antennas to reduce interference and widen the sensor’s field of view. From self-driving cars navigating busy streets to drones surveying disaster zones, lidar has become one of the most important technologies for helping machines perceive the world in three dimensions. By sending out rapid pulses of infrared [...]

Hailo’s Yaniv Sulkes talks about physical AI and how hardware acceleration helps address challenges.

© ID 310740362 © Dmitrii Melnikov - Dreamstime.com

Ritu Favre talks about NI’s Nigel AI test and measurement platform.

© NI/Emerson