The US has just approved a new floating offshore wind system, which is designed to support safer and more efficient installation and operation of floating offshore wind turbines (FOWT).

The American Bureau of Shipping (ABS) awarded a Product Design Assessment (PDA) to Scotland’s industrial equipment supplier Encomara for its Squid system on June 17. The quick-connect solution combines mooring and electrical cable protection for FOWTs.

As per the organization, the approval follows an earlier Approval in Principle (AIP) and represents a more advanced level of technical review and design verification. ABS said it completed a detailed assessment of the technology against class and industry requirements for floating offshore wind applications.

“ABS is proud to support Encomara in bringing that approach to this sector, and this assessment reflects the technical depth behind it,” Rob Langford, ABS Vice President of Global Offshore, said.

The Squid system

Floating wind systems are expected to play a major role in expanding renewable energy generation. They can be deployed in deeper waters where fixed-bottom turbines are not practical.

This would increase the amount of usable marine space, as well as unlock access to stronger and more abundant wind resources. Still, installation and maintenance operations remain complex and costly. As a result, this has left developers looking for technologies that can simplify offshore deployment.

To tackle the issue, Encomara adapted the Squid system from the Disconnectable Turret Buoy (DTB). The technology has been used for years in floating oil and gas production. It is made from conventional offshore components that already have high technology readiness levels.

The Squid technology is built to protect moorings and interarray cables during turbine installation and off-station periods. It relies on procedures already well understood across the offshore industry.

What’s more, its disconnectable design can support repair scenarios throughout the unit’s entire service life. This helps reduce risks when temporary disconnection is required.

A proven technology

The company estimated that the Squid could increase floating turbine installation rates by 42 percent per season and raise energy yield during project ramp-up by 27 percent. It also projected a 2.5 percent lifetime increase in energy output.

This, according to Ian Donald, Encomara Managing Director, is equivalent to 3.3 terawatt-hours (TWh) of additional electricity generation for a 1.2-gigawatt (GW) floating wind development.

Donald pointed out that receiving a PDA from ABS marks a pivotal step in Squid’s qualification journey. “We’ll be conducting further inshore wet testing in Ardersier in the coming months, representing the next steps toward Technology Readiness Level assessment and commercial adoption,” he continued.

Encomara plans to carry out onshore demonstrations at AES’s Huntly site in July.
In August, the company will move on to inshore wet trials and demonstrations for customers.

Studies backed by Scottish Enterprise and industry developers suggest the Squid system could slash installation times by up to 50 percent. It could also potentially deliver savings of USD 1.35 billion (GBP 1 billion) per gigawatt of floating wind capacity.

“Floating wind developers need proven, bankable solutions, and this is exactly what Encomara is delivering,” Donald concluded in a press release.

Researchers in Germany have brought Europe’s first and only superconducting TES-array X-ray spectrometer online at the BESSY II synchrotron, a leading 3rd-generation synchrotron light source.

The instrument was developed within a collaboration between the Helmholtz-Zentrum Berlin (HZB), the Max Planck Institute for Chemical Energy Conversion (MPICEC), and US’ National Institute of Standards and Technology (NIST).

It relies on a 248-sensor detector array that can detect X-ray photons far more efficiently than conventional X-ray emission spectroscopy (XES) and resonant inelastic X-ray scattering (RIXS) systems. Its photon detection efficiency is 100 to 1,000 times higher than that of traditional wavelength-dispersive X-ray emission spectrometers.

According to the team, it will be used to investigate the electronic properties of atomically thin layers, nanostructures, and highly diluted atomic and molecular samples. The team expects the instrument to enable many new groundbreaking experiments.

The first TES spectrometer

Synchrotron facilities such as BESSY II generate intense beams of X-rays that allow researchers to probe the structure and properties of matter. However, techniques such as XES and RIXS require the detection of photons emitted by a sample after it interacts with incoming X-rays. This makes them highly photon-hungry.

These methods have traditionally been limited to large or highly concentrated samples. The Transition Edge Sensor (TES) spectrometer will enable studies of atomically thin layers, nanostructures, impurities, and highly diluted molecular systems.

“The superconducting Transition Edge Sensor (TES) array photon detector that we have now put into operation at BESSY II is around 100 to 1000 times more efficient to detect photons than conventional XES and RIXS spectrometers,” Régis Decker, PhD, a HZB scientist responsible for the new instrument, said.

Decker explained that the system could provide insights into molecular chemistry, molecular biology, and quantum materials. It also complements techniques such as angle-resolved photoemission spectroscopy (ARPES). ARPES is widely used to investigate electronic band structures.

Reshaping X-ray analysis

The instrument could significantly cut experiment times. In practice, this means that measurements that would normally take hours with conventional systems could now be completed in just a few minutes. This would make it possible for scientists to collect data more efficiently and investigate more materials.

HZB pointed out that the TES array spectrometer contains 248 sensors that are superconducting when cooled to 25 millikelvin (mK). This is just a fraction of a degree above absolute zero. It is achieved using a helium-4/helium-3 (He⁴-He³) dilution refrigerator similar to the cryogenic systems used in quantum computers.

Once X-ray photons emitted by a sample strike one of the sensors, they cause a tiny temperature increase that briefly disrupts the sensor’s superconducting state. This change in electrical resistance is detected through a circuit based on an array of Superconducting Quantum Interference Devices (SQUIDs).

The spectrometer is integrated with a custom ultra-high-vacuum sample chamber that allows researchers to transfer, prepare, and measure samples at temperatures ranging from 10 kelvin (K) to room temperature.

The setup is installed at the BESSY II UE52-SGM beamline, where scientists can also control the polarization of incoming X-rays. “We are looking forward to receiving exciting research proposals from our user community,” Decker concluded in a press release.

💾