Sensors designed to record earthquakes can reveal insights into a very different natural hazard – how hurricanes evolve and intensify as they strike land. The surprising connection has been made by researchers in the US, who examined data from seismic sensors installed in Louisiana for studying the interior of the Earth. They found that the sensors, which collected data on pressure fluctuations, provided information about how Hurricane Isaac grew and intensified as it struck and devastated the state in 2012.

Earthquakes and hurricanes are very different in how they form, move and impact the Earth. The parameters governing these natural hazards – and the way that we measure them – are also distinct given that one is a geophysical phenomenon and the other atmospheric.

Hurricanes, which form over warmer tropical and subtropical ocean waters, are rotating systems of cloud and thunderstorms. They consist of a calm, central “eye”, a surrounding layer of tall thunderstorms, and strong winds called the “eyewall”. Spiralling away from the eyewall are bands of clouds and thunderstorms.

Forecasters describe the structure and evolution of hurricanes using three main parameters: track, intensity and the radii of the wind layers around the eye. But when hurricanes strike land, particularly important is the turbulence in the lowermost layer. That’s where momentum, heat and moisture mix between the atmosphere and the ocean or land.

Eyeing up hurricane path and intensity

Measuring the turbulence in this boundary layer is critical both for forecasting wind intensity and for developing and validating weather models. Such data are usually collected using reconnaissance aircraft, ocean buoys and onshore towers and radar. But flying planes into hurricanes is dangerous, while onshore towers are sparse, making data-gathering tricky. Continuous monitoring of a storm’s passage is not easy either.

In the new study, Qing Ji, Ipshita Dey and Eric Dunham from Stanford University processed data from seismic stations in Louisiana that are part of a network of 1700 stations across the US. Equipped with both infrasound sensors and seismometers, these “seismoacoustic” stations are designed to record seismic activity.

The infrasound sensors measure pressure fluctuations at the Earth’s surface, with the seismometers recording the resulting elastic response. But when the hurricane passed through the equipment, the winds were strong enough to leave an additional signal. In fact, the Stanford team found that the data revealed the calm eye and the turbulent eyewall – as well as the circular layers of thunderstorms and winds as the hurricane passed through the sensors.

“The infrasound sensors provide direct measurements of turbulent pressure fluctuations,” says Dunham. “We also used the seismometer data together with data from other atmospheric sensors to calibrate a computer model of hurricane turbulence.” The model provided space-time correlations of pressure fluctuations around the station, while the simulated pressure spectra matched the recorded data at station.

The researchers then calculated the Earth’s elastic response using the simulated pressure field, which aligned with the observed vertical displacement. More importantly, the simulations showed that the relevant parameter for calculating the Earth’s elastic response to pressure fluctuations is the velocity at which those fluctuations are carried downstream — rather than the near-surface wind speed as had been assumed.

Exploiting existing sensor networks

Dunham told Physics World that he hopes the study will draw attention to the potential of seismoacoustic networks for atmospheric sciences. “Perhaps this will lead to deployments of seismometers and infrasound sensors in areas where coverage is currently sparse, like in the southeastern US,” he adds.

Those hopes are echoed by Ji – now based at the University of Texas, Austin – who says there is a growing interest in the use of these “noise” signals for environmental monitoring. As Ji points out, the beauty of seismic stations is that they record data continuously and have a high sampling rate compared to other sensors.

Seismoacoustic stations have already been used to study various environmental and climatic phenomena, such as rising amounts of energy in ocean waves as waters warm and the evolution of tropical storms and accompanying winds. “The atmospheric imprints, however, are less studied partly due to the overall smaller amplitudes and the potentially more complicated nature,” Ji adds.

Dunham also sees an opportunity to add infrasound sensors and barometers, both of which measure atmospheric pressure, to existing seismometers. “Having multiple sensors at a single location opens up new opportunities for studying both the solid Earth and atmosphere,” he says.

The researchers report their findings in Science.

The post Earthquake sensors reveal vital information about how hurricanes move and grow appeared first on Physics World.

Researchers in China have cross-calibrated radiation detectors on 25 navigation satellites. Data from two decades of measurements have been combined to create a record of the flux of relativistic electrons that impinges on Earth’s atmosphere. The technique can be applied to other satellite data, and could boost our understanding of the threat that this radiation poses to satellites and shed light on the solar processes that generate the electron flux.

The Global Positioning System (GPS) uses signals from a constellation of satellites to locate the position of receivers on the Earth’s surface to within several metres. There are currently 32 GPS satellites orbiting about 20,000 km above the Earth and each of them carries a radiation detector. These detectors allow scientists to observe changes in radiation levels in space. Much of this radiation comes in the form of high-energy electrons from the Sun, which can disrupt the operation of satellites and even damage them.

The electron flux rises and falls with the solar cycle. This has a period of about 11 years and involves the waxing and waning of sunspots, solar flares and coronal mass ejections.

For those who design and operate satellites, it is crucial to understand this electron flux. However, it has proven difficult to make full use of the data generated by these detectors because the instruments had not been cross calibrated. Indeed, measurement values of high-energy electrons can vary between satellites by several orders of magnitude when the flux is low. One important issue is that not all satellites use the same detectors – with two different instruments having been deployed.

Cross calibration

Now, researchers in China have done a cross-calibration of the particle detectors on 25 GPS satellites. The result is a calibrated dataset of relativistic-electron flux that spans two complete solar cycles (2000–2020).

To do this, the team looked at two different measurements made by the detectors. One is the differential electron flux at 2 MeV arriving from one specific direction. The other is the integral electron flux electrons arriving from all directions at energies greater than 2 MeV.

Because electron flux is affected by Earth’s magnetic field, the team had to consider its effect on measurements. This was done using a concept called magnetic local time, which accounts for the fact that Earth’s magnetic poles are offset from our planet’s axis of rotation.

The team used a satellite called NS59 as the reference for their study because its detector has produced a consistent set of data from 2004 – overlapping in time all other satellites in the study. By doing several statistical analyses, the team was able incorporate data from 24 of the 25 satellites. One detector, however, remained problematic and the researchers recommend that data from this satellite not be used.

The team says that their technique can now be used to cross-calibrate the detectors at other energies – there are 14 differential and 29 integral channels that can be also be analysed. They have already used the same techniques to cross-calibrate the GPS data with measurements made by satellites in  China’s BeiDou positioning system  and observations made by NASA’s two Van Allen Probes.

The research is described in Satellite Navigation.

The post GPS particle detectors track space radiation over two decades appeared first on Physics World.

The free-to-read Physics World Instrumentation and Vacuum and Briefing 2026 is now available. It includes R&D updates, interviews that explore technology commercialization, and a fun look at the quirky side of SI units.

One topic covered in the briefing is the world of quantum sensors. Over the years, physicists have developed some amazing quantum sensors, but many of the technologies have stayed in the lab because of the challenges of miniaturizing key components. With ultrahigh vacuum (UHV) playing an important role in quantum sensors based on cold atoms, Florence Concepcion of the UK-based firm Aquark talks about her mission to reduce the size and energy consumption of UHV systems.

Elsewhere in the issue, we look at how manipulating individual living cells plays an important role in biology and medicine. Trouble is, cells tend to stick together when grown in vitro and separating them often involves using harsh chemicals that can damage cells or modify their properties. In a special interview, Luke Cox, who co-founded the UK-based firm Impulsonics, discusses its system that uses ultrasound to gently separate living cells.

Another entrepreneur featured in this briefing is Brian Pogue, co-founder of DoseOptics. The US-based company has developed a system that detects the extremely faint Cherenkov light that is emitted when a radiotherapy beam strikes a patient’s skin. This allows the radiotherapy to be monitored in real time, ensuring that the beam passes through the target tissue and avoids healthy areas of the body.

Also included is a look at the use of intense laser light to accelerate particles. Find out how researchers in the US have created a compact, free electron laser that is driven by a laser plasma accelerator (LPA) – and it has also been used to create a beam of muons.

Finally, you can explore some of the curiosities of the International System of Units (SI), which is the bedrock of metrology. Although SI and its predecessors have been honed and re-defined over the centuries, it still has some surprising quirks. Ben Stein from the US National Institute of Standards and Technology explores some of these oddities including how the candela was derived from the brightness of a candle made from whale fat and beeswax – and the ongoing debate about using the dimensionless radian as the SI derived unit for planar angle.

• Read the Briefing now.
• You can also watch our Physics World Live Quantum metrology panel discussion.

The post The 2026 <em>Physics World Instrumentation & Vacuum Briefing</em> is out now appeared first on Physics World.

It was fantastic to see the men’s marathon world record being broken in London at the end of April when Kenya’s Sabastian Sawe became the first person to officially complete the run in under two hours. It’s an achievement that a whole generation of world-class runners had had their eyes on, with Sawe completing the race in a headline-grabbing 1:59:30.

Perhaps less attention was given to another achievement a week earlier, which saw a humanoid robot run the Beijing E-Town half-marathon in 50:26, breaking the human record by almost seven minutes. What’s particularly impressive is that at the inaugural event in 2025, the robot winner took 2:40:42 to complete the race, with many robot entrants failing even to reach the finishing line.

In just one year, in other words, the robot half-marathon record has been slashed by more than two-thirds, an unthinkable feat in human terms. What’s more, the rules between the first and second robotic competitions were tightened. They now favour robots that can run on their own (rather than via remote control) and penalize those that need to be taken off course to have their batteries changed.

Giant steps

My mind began spinning, trying to work out what must have happened over the past year to realize such advancements. How did we go from remote-controlled, slow and clunky robots to autonomous, agile and sleek devices? It turns out that these increases in speed and endurance have been driven by a combination of better hardware, specialized designs and advanced algorithms.

Robots now benefit from powerful actuators enabling higher torque and faster movement of its hips and knees. Anatomical designs have also been optimizied to mirror biological efficiencies by, for example, using lightweight limbs and lower torso components to minimize the energy lost when a robot’s foot strikes the ground.

Other changes include the use of liquid cooling technologies to stop a robot from getting too hot during prolonged activity and finding ways to mimic highly efficient natural bipeds, such as an emu or ostrich. Improved AI and control software have also allowed robots to navigate varied terrain and stay stable autonomously, rather than relying on remote operation.

AI answers

Of all these developments, I believe the most significant is the expanding use of AI. To me, it seems that AI will be the enabler for robots to become more “human”. In China, humanoid robots are already being developed to automate what is dubbed the hardest task in the car industry – the final assembly stage.

This work typically consists of real people carrying out highly labour-intensive tasks such as installing wiring harnesses, fitting a vehicle’s interior trim and instruments, or bringing its engine and chassis together. Being super-precise tasks that require manual dexterity, this work has previously been thought too complex for robots.

However, through a combination of imitation learning, simulation and real-time human guidance, it’s now becoming conceivable for robotic devices to do this kind of work. Underpinning this aspiration are what are known as  Vision-Language-Action (VLA) models, which process camera images together with natural language or text descriptions and translate these into physical actions.

Having emerged relatively recently from work at AI firm Google DeepMind, VLA models differ from traditional, task-specific programming robotics by offering generalization and the ability to handle novelty. They are seen as the next big thing in AI because they bridge the gap between understanding the world (vision and language) and interacting with it (action) – potentially letting robots do tasks they have not been explicitly trained on.

VLAs typically rely on existing Vision-Language-Models (VLMs), which provide a combined knowledge of text (large language models) and images (computer vision models). The VLA model is then fine-tuned on task-specific data to learn a mapping of visual observations and text instructions to create the desired robot action.

One challenge in training VLAs is getting enough data with appropriate visual and contextual information. It may be gleaned from real robots (imitation) but it can also be generated by human guidance or teleoperation – a manual process involving humans “showing” robots how to do a specific task. The task is time-consuming, having to be performed deliberately and repeatedly using equipment that captures appropriate levels of data quantity and quality.

A third option is to build virtual simulation environments to train the models and optimize robotic movements. As VLAs inherently learn to associate higher-level cognition with lower-level physical actions, the trend will be to move from fixed, pre-programmed scripts towards AI and large-scale simulation training. The result: robots that become more autonomous and versatile in real-world situations.

We are all getting used to AI becoming an increasing part of our everyday life – think how much GenerativeAI models have improved since they first appeared a few years ago. But I wonder what will be next for robots as they become capable of moving independently and spontaneously, having the ability to operate with full autonomy within dynamic human environments, such as homes and factories.

When we – eventually – experience the full physical embodiment of Artificial General Intelligence, will it be like living on the filmset of I, Robot or Blade Runner, with humans and humanoids coexisting and, in some cases indiscernible? Several years ago, this was something I did not expect to see in my lifetime. But in April it just got one giant leap – or at least one half-marathon – closer.

The post How AI is transforming human robots appeared first on Physics World.

A bolometer that can measure absorbed energy at a resolution of less than a zeptojoule (10⁻²¹ J) has been unveiled by Mikko Möttönen and colleagues at Finland’s Aalto University.  Their device could soon enable researchers to measure the energy of individual lower-energy photons – leading to new opportunities in quantum computing and information processing.

A bolometer detects radiation using two main components: an absorber, which heats up as it captures incoming radiation, and a thermometer, which converts this temperature rise into a measurable electrical signal. Bolometers are some of the most sensitive radiation detectors in use today.

Indeed, high-performance bolometers based on nonlinear oscillators, superconducting qubits or Josephson junctions are sensitive enough to detect individual microwave photons with energies of about 10⁻²³ J. However, these devices are not able to resolve photon energies very well and only work over certain photon energy ranges.

Normal sandwich

A Josephson junction comprises a normal (non-superconducting) material sandwiched between two superconductors. Thanks to the proximity effect, superconducting Cooper pairs of electrons can penetrate some distance into the normal material. So, if the normal material is narrow enough, a supercurrent will flow across the junction.

“We started to build bolometers based on so-called proximity superconductivity around 2010 when I obtained my European Research Council Starting Grant,” says Möttönen.

In the team’s previous bolometer design, the normal material (a metal) absorbs photons, thereby increasing the temperature of the Josephson junction. This results in a shift in the impedance of the junction – and this shift is measured and related to the amount of energy absorbed. A key feature of this approach is the integration of the absorber and thermometer functions into a single structure.

In their latest study, Möttönen’s team has expanded their design to include multiple junctions. “We used gold-palladium (AuPd) and aluminium as the materials such that we can independently engineer the absorber part of the device from the thermometer part,” he describes. “We can optimize the strength of the superconductivity in the thermometer for high sensitivity.”

Impedance match

Their design consists of a AuPd nanowire (a normal metal), split into two segments. The first acts as an absorber and is tuned to match the impedance of the transmission line delivering microwave photons. This ensures that the highest possible amount of microwave power is transferred to the nanowire, across a broad range of photon energies.

The other nanowire segment acts as the thermometer. Superconducting aluminium islands are placed next to the nanowire, creating a series of Josephson junctions. By measuring inductance shifts across the junctions the team determined the energies of single photons at resolutions smaller than 1 zJ.

The researchers are hopeful that their design will be developed to create practical detectors of single lower-energy photons – and potentially other types of particle. This would be especially useful for calibrating the components of quantum computers.

“We will use this sensor in what I refer to as an autonomous quantum processing unit to measure qubits at millikelvin temperatures and feed back to information through millikelvin controllers and microwave sources,” Möttönen says. “This will dramatically reduce the price of quantum computers in the future.” The detector design could be also adjusted to receive telecom signals at the single-photon level – providing an ideal platform for the ultra-secure communication method of quantum key distribution.

The post New bolometer achieves sub-zeptojoule resolution appeared first on Physics World.