Researchers have developed a magnetic method for influencing deep-brain circuits without permanently implanted electrodes. A magnetic field may offer a new way to reach circuits buried deep within the brain without permanently implanting electrodes. An international research team injected magnetic nanoplatelets into a targeted brain region and used them to improve movement problems in mice [...]

Gold’s pristine shine may depend on an until now hidden atomic rearrangement at its surface.

Antibiotic contamination in natural water sources has emerged as a pressing environmental crisis, posing significant risks to both ecosystems and public health worldwide. Conventional water treatment methodologies often fall short of efficiently eliminating persistent antibiotic residues, which frequently enter water bodies through human and animal excretion. These residual contaminants, such as levofloxacin and other widely used antibiotics, resist degradation and can perpetuate antimicrobial resistance, thereby escalating the urgent need for innovative and sustainable remediation technologies.

In a groundbreaking development, a team of researchers led by Dr. Jiafang Xie at the Institute of Urban Environment, Chinese Academy of Sciences, has engineered a novel biochar-based catalyst derived from rice husks — an abundant agricultural byproduct — that demonstrates unprecedented efficacy in the rapid degradation of antibiotics under environmentally benign conditions. Their study, published in Biochar, reveals that the cobalt oxide-loaded biochar catalyst can instantaneously activate peroxymonosulfate to achieve complete breakdown of levofloxacin in merely four minutes at neutral pH, marking a transformative leap in wastewater treatment science.

The synthesis of this biochar catalyst, designated as RHBA800@25Co3O4, involved the meticulous preparation of oxygen-rich activated biochar from rice husk biomass followed by the strategic dispersion of cobalt oxide (Co3O4) nanoparticles across its porous matrix. This synergistic structural design produces a highly reactive and accessible catalytic surface, effectively combining the high surface area and functional group abundance of biochar with the potent oxidative capabilities of cobalt oxide nanostructures. This optimization paves the way for superior interaction with peroxymonosulfate, an oxidant known for its potential in advanced oxidation processes.

Performance assessments extended beyond controlled laboratory conditions to real-world aqueous environments, where the catalyst maintained remarkably high degradation efficiencies. Trials conducted in various water samples—ranging from lake and tap water to secondary effluent discharged from municipal sewage treatment plants—confirmed its robust activity and versatility. Furthermore, in a custom-designed fixed-bed reactor, the catalyst demonstrated sustained functionality over 72 consecutive hours, highlighting its stability and practicality for continuous flow water purification systems.

A central scientific breakthrough of this research lies in elucidating the elusive catalytic mechanism underpinning Co3O4-mediated peroxymonosulfate activation, a topic previously clouded in uncertainty. Employing a combination of sophisticated in situ Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and density functional theory (DFT) calculations, the investigators identified lattice oxygen within Co3O4 as a pivotal contributor to the generation of reactive intermediates. Notably, under reaction conditions, lattice oxygen induces formation of a novel surface species, Co3O4−α–OH, which exhibits stronger affinity for peroxymonosulfate molecules and facilitates accelerated electron transfer essential for rapid oxidative reactions.

This discovery not only unravels the crucial role of lattice oxygen chemistry in cobalt oxide catalysts but also resonates with the catalyst’s observed ultrafast kinetics. The biochar support enhances cobalt oxide dispersion and prevents nanoparticle aggregation, optimizing active site availability. Meanwhile, the transformation of lattice oxygen into hydroxylated intermediates intensifies catalytic efficiency by promoting quicker and more effective peroxymonosulfate activation through both radical and non-radical pathways, including the generation of sulfate radicals, hydroxyl radicals, and singlet oxygen species.

Importantly, the degradation process exhibited comprehensive antibiotic elimination with reduced toxicity in the resulting solution. Analytical examination of transformation products revealed that the byproducts formed possess significantly lower antimicrobial activity. Correspondingly, bacteriological tests employing Escherichia coli demonstrated that treated levofloxacin solutions lacked antibacterial inhibition zones compared to untreated samples. This validates the catalyst’s dual role in not only cleaving antibiotic molecules but also mitigating potential ecological hazards associated with harmful metabolites.

The implications of this research extend beyond immediate water purification applications, underscoring a sustainable and circular approach to environmental remediation. By valorizing agricultural residues like rice husk into high-performance catalytic materials, the study exemplifies the integration of waste management with advanced chemical technology. This aligns with global efforts to address pollution while fostering resource efficiency and environmental stewardship through biochar innovation.

Dr. Xie emphasizes that the fusion of agriculture-derived biochar and transitional metal oxides represents a promising frontier in catalysis, where material design and mechanistic insights coalesce to solve practical challenges. The precise identification of Co3O4−α–OH intermediates from lattice oxygen transformation not only advances fundamental knowledge but also guides future catalyst development for broader environmental and industrial applications requiring efficient oxidation chemistry.

Looking ahead, the research team envisions deploying this cobalt oxide biochar catalyst in larger-scale water treatment infrastructures to tackle widespread antibiotic contamination issues. The demonstrated durability and performance in mixed and complex water matrices suggest high feasibility for real-world implementation. This technological innovation paves the way for rapid, cost-effective, and environmentally friendly solutions to safeguard water quality and public health on a global scale.

Ultimately, this study heralds a new era where interdisciplinary research marries the principles of materials science, environmental engineering, and catalysis to combat the persistent pollutant load burdening aquatic systems. The remarkable speed and efficacy of the RHBA800@25Co3O4 catalyst in simultaneously activating peroxymonosulfate and degrading antibiotics redefines potential benchmarks for next-generation water treatment technologies, inviting further exploration and adaptation in the fight against pollution and antimicrobial resistance.

---

Subject of Research: Experimental study on the development and mechanistic analysis of cobalt oxide-loaded rice husk biochar catalyst for rapid antibiotic degradation in water.

Article Title: In situ observation of Co3O4−α–OH formation on optimized biochar for peroxymonosulfate activation and ultrafast antibiotics degradation

News Publication Date: 16 June 2026

Web References:
Journal Biochar: https://link.springer.com/journal/42773
DOI: http://dx.doi.org/10.1007/s42773-026-00634-8

References:
Zhang, J., Xie, J., Zhu, S. et al. In situ observation of Co3O4−α–OH formation on optimized biochar for peroxymonosulfate activation and ultrafast antibiotics degradation. Biochar 8, 113 (2026). https://doi.org/10.1007/s42773-026-00634-8

Image Credits: Jian Zhang, Jiafang Xie, Shuhui Zhu, Jiacheng E. Yang, Bo Weng & Yuming Zheng

Keywords

Biochar, cobalt oxide, Co3O4−α–OH, antibiotic degradation, peroxymonosulfate activation, wastewater treatment, advanced oxidation processes, levofloxacin, rice husk catalyst, environmental remediation, antimicrobial resistance, catalytic mechanism

A new ultra-efficient DNA splicing method developed by a Japanese research team using silver nanoparticles offers a dramatic improvement to how scientists stitch genetic blueprints together, with implications for future developments in genetics.

In animal models for drug research, crop breeding, and disease treatment, scientists cut and recombine DNA segments, traditionally relying on “sticky ends,” the overhanging bits left at the ends of the sequences to create a stable join.

Now, researchers at Japan’s Nagoya University and Gifu University have announced a much more precise silver nanoparticle-based solution for DNA cutting and joining in a recent paper published in Nucleic Acids Research, enabling incredible precision.

DNA Splicing Challenges

The sticky ends required in traditional splicing techniques come with significant drawbacks. In these methods, restriction enzymes cut DNA, which is then reattached using T4 DNA ligase. Unfortunately, restriction enzymes lack precision, often producing sticky ends that are not long enough to create an optimal join.

Professor Hiroshi Abe and Assistant Professor Masahito Inagaki at Nagoya University, in collaboration with Professor Natsuhisa Oka at Gifu University, led the effort to improve the efficiency of DNA splicing. The team focused on cutting DNA segments using chemical reactions rather than the restriction enzymes typically employed, drawing inspiration from decades-old research.

Between 1990 and 1992, researchers reported successfully cutting 3′-thiol-modified DNA at specific locations using silver ions.

“Although it had been known for a long time, it was never put to practical use, and we recognized that it could be the key to our goal of creating sticky ends of any length and sequence at any position we choose,” Hiroshi told The Debrief.

Rethinking Old Work

However, this method was impractical because nonspecific binding of silver ions resulted in only a 14% recovery rate.’ The researchers’ breakthrough came from substituting silver nanoparticles for silver ions, aiming to improve DNA recovery by removing them via centrifugation after the reaction was over.

“The turning point was to turn this problem of ‘how to remove the silver’ to our advantage,” Hiroshi explained. “We reasoned that if the silver were in the form of nanoparticles, it could be removed easily by centrifugation after the reaction, greatly improving recovery.”

Another problem quickly arose, as cleaving efficiency required temperatures and durations that were hazardous to the DNA itself. At 70°C, the DNA achieved only 50% efficiency, whereas it took 2 hours at 95°C to reach something approaching 100% efficiency.

Polyethylene glycol (PEG), a water-soluble polymer, provided the solution the researchers required. Coating the silver nanoparticles with PEG increased efficiency at a mere 37°C for two hours, from 36% to 92%. 

“In the end, we optimized the conditions to a practical level and, under ambient temperatures, achieved PEG-modified cleaving efficiency above 91% at 50°C within just one to two hours,” Inagaki said.

A Powerful DNA Editing Breakthrough

The new silver nanoparticle technique improves DNA assembly efficiency by two to five times. Crucially, their work is not theoretical: the team successfully introduced a DNA fragment into live cells, confirming expression of a green fluorescent protein gene.

“We have shown that two DNA fragments can be joined. Now, we need to confirm whether multiple fragments can be joined at the same time—a key step for building genome-scale DNA,” Ingaki said.

The researchers will continue to pursue this new splicing method, both to explore its potential for advanced applications and to consider bringing the technique into routine use.

“To make it a routine, everyday tool, the remaining tasks are to verify reproducibility across a wide range of sequences, to scale up to longer DNA, and to develop standardized, kit-format protocols that anyone can follow,” Hiroshi said. “We see these as engineering and optimization challenges rather than fundamental barriers, and we believe they can be overcome.”

“Our next goal is to extend this technique to longer DNA and, ultimately, to genome-scale DNA assembly,” Hiroshi concluded. “Specifically, we plan to apply it to the construction of mRNA libraries and the synthesis of long-chain DNA encoding therapeutic proteins, while also working on automation and standardization, so that it can grow into a foundational technology actually used in the fields of synthetic biology and nucleic acid medicine.”

The paper, “Silver Nanoparticle Induced Site-Specific Strand Cleavage of Chemically Modified Oligonucleotides for Long-Chain DNA Assembly,” appeared in Nucleic Acids Research on June 10, 2026.

Ryan Whalen covers science and technology for The Debrief. He holds an MA in History and a Master of Library and Information Science with a certificate in Data Science. He can be contacted at ryan@thedebrief.org, and follow him on Twitter @mdntwvlf.

Gold is weird. It's one of the few metals that doesn’t really oxidize. Even silver and copper—from the same column of the periodic table—form weak oxides. Naively, you might expect that gold would tarnish just like silver. Gold also sits right next to platinum, but it has none of that metal’s catalytic properties.

Then came gold nanoparticles that acted like catalysts, and we were confused by their apparent willingness to take part in chemical reactions.

Now, a pair of scientists has explained that gold’s inertness isn’t inherent to the atom but rather to the surfaces that gold crystals form. Before we get to the results, let’s first take a look at the traditional explanation for gold’s inertness and why an inert material that has no catalytic activity suddenly acts as a catalyst when in its nanoparticle form.

Read full article

Comments

© Kieran Stone

A novel phase of matter has been achieved by a team of American researchers, finally realizing a theoretical quantum prediction using nanoscale building blocks, a breakthrough that could pave the way for room-temperature quantum computing.

Researchers at Brown University and the University of Michigan College of Engineering revealed how they briefly stabilized the novel state of matter in a nanoparticle superlattice in a recent paper published in the journal Science. They say their work provides a new method for engineering classes of materials with custom-shaped nanoparticles, which could be applied to quantum computers and other quantum applications.

Quantum Blocks

“Our work is a little bit like kids playing with LEGO blocks,” said co-author Ou Chen, an associate professor of chemistry at Brown. “We synthesize unique nanoscale building blocks and stack them into interesting structures. In this case, we were able to stabilize these theorized transitional structures and demonstrate important quantum optical properties.”

Most metals form in one of two primary groups of crystal structures. The first is face-centered cubic (FCC), the tightest packing arrangement for spherical particles, typically forming a cube with a single particle at each corner and at the center of each face. The other type is body-centered cubic (BCC), a more loosely packed structure in which single particles are still present at the corners, but instead of each face being centered on a particle, one sits at the center of the entire arrangement.

For the most part, atoms form one of these structures as they arrange into a metal, yet at high temperatures, some metals can switch from one structure to another. When it reaches 912° Celsius, Iron will transition from BCC to FCC. One explanation proposed for the transition is the Nishiyama-Wassermann pathway, which suggests that, due to the lower symmetry of the transition phases between FCC and BCC, these phases are fleeting.

Testing the In-Between States

The American team behind the recent research decided to test this idea, fabricating one of those low symmetries in between phases with silver nanoparticles 

“Materials scientists have cared about how to control the amount of FCC and BCC in their metals for a long time, but the transitions between these phases have been hard to study because they are so unstable,” said co-author Tim Moore, an assistant research scientist at the University of Michigan. “Being able to observe these structures is a fundamental breakthrough in materials science, and it gives us greater control over nanomaterial engineering.”

At the heart of the team’s work was the truncated octahedron, or “mecon,” a 14-sided polyhedron formed by cutting off the vertices of a diamond, producing an intermediate shape between a cube and sphere.

As the team synthesized silver nanoparticles, they varied the heat level during production, resulting in a spectrum of shapes ranging from cubic to spherical, which were coated with long, sticky molecules that bound the particles. They found that the sticky molecules were required for the particles to assemble themselves into the intermediate shapes predicted by the Nishiyama-Wassermann pathway.

Near Quantum Behavior 

Once the particles self-assembled into variously shaped nanoparticle superlattices, the team tested their behavior with computer simulations and physical observations.

The superlattices show evidence of a process known as deep-strong light-matter coupling, in which silver electrons vibrate in unison with light waves, becoming so hybridized they could no longer be treated independently. The similarity of this state to quantum entanglement leaves the team hopeful that their superlattice can be applied to quantum work in the future. 

Crucially, this action occurs at room temperature, whereas in previous instances it occurred only at very cold temperatures. This means the work could be useful for developing quantum technologies, which have been limited by the extreme cold required.

“One of the major challenges in quantum computing is maintaining coherent quantum states without requiring extremely low temperatures,” Chen told The Debrief in an email. “Our work suggests that carefully engineered nanoparticle superlattices may provide a scalable materials platform where strong and coherent light–matter interactions can persist at room temperature.”

Quantum Applications

“In the long term, such systems could potentially be used to create or manipulate quantum states for applications in quantum information science, including quantum communication, sensing, or photonic quantum technologies,” Chen said. “However, it is important to emphasize that this research is still at the fundamental physics and materials discovery stage. We are not yet building a room-temperature quantum computer, but rather exploring new material platforms that may help enable future quantum technologies.”

As research continues, the team is focused on more precisely controlling the superlattices’ quantum optical properties.

“Specifically, we are interested in: Engineering nanoparticle architectures that produce even stronger and more controllable light–matter coupling; Exploring how structural order, particle shape, and lattice symmetry influence quantum optical behavior,” Chen explained, “and Integrating these materials with photonic and optoelectronic platforms for potential quantum-device applications.

“More broadly,” Chen concluded, “we see this work as opening a new direction where nanoscale self-assembly can be used to engineer emergent quantum optical properties that do not exist in the individual nanoparticles alone.”

The paper, “Stabilizing In-Transition Phases of Superlattices Through Shape Control of Silver Nanocrystals,” appeared in Science on May 28, 2026.

Ryan Whalen covers science and technology for The Debrief. He holds an MA in History and a Master of Library and Information Science with a certificate in Data Science. He can be contacted at ryan@thedebrief.org, and follow him on Twitter @mdntwvlf.

Dr Michael Yeadon, former Pfizer vice president in charge of vaccine production, makes an impassioned appeal to the world against COVID-19 vaccinations. He exposes the truth behind the mRNA shots as deliberately designed sterilization depopulation bioweapons.