I've been using UGREEN's Nexode Pro chargers while traveling for well over two years now. These charges don't take up much room thanks to GaN tech, and they have all the ports I need. The latest iteration of the product — the UGREEN Nexode Pro 160W Charger with Retractable Cable — adds a retractable cable, built-in panel, and foldable pins, and while it is a little bigger than its predecessor, it the new features provide much better convenience in daily use.

The Nexode Pro 160W charger is now available for $99 on Amazon, and I think that's a reasonable price when you look at everything on offer. I the Nexode Pro 160W for the better part of three months, and I'm outlining three reasons why it is now my go-to GaN charger.

The built-in LCD panel takes guesswork out of charging

While the Nexode Pro 160W isn't the only charger to come with a built-in LCD screen, it makes a big difference in my usage. I connected a lot of accessories and phones to the charger in the last three months, and knowing just how long it takes to fully charge these devices takes all the guesswork out of charging.

The screen also shows real-time charging speeds, including wattage, voltage, and which charging protocol is being used. This is particularly useful for me, as I tend to use phones like the Find X9 Ultra and Vivo X300 Ultra that use their own charging standards. Thankfully, these phones rely on USB PD at up to 50W, and that's what I ended up using. The screen rotates based on the orientation of the charger, which is a nice addition.

The retractable cable is an added bonus

Retractable cables in charging products became a thing around two years ago, and since then, I didn't use a power bank that didn't have it. They're just so useful, and I'm excited to see brands adding these cables to chargers. The retractable cable on the Nexode Pro 160W goes up to 140W, and is ideal for charging phones, notebooks, and power banks.

The cable has four preset lengths, and goes up to 70cm with a full extension. The USB-C connector has a built-in magnet that ensures the cable is attached to the GaN charger when not in use, and after three months of extensive use, I didn't see any issues with the retractable motor.

It has all the ports I need

With three USB-C ports (including the retractable cable) and a USB-A connector, the Nexode Pro 160W has all the ports I need in daily use. The USB-C1 and retractable ports go up to 140W over the USB PD 3.1 protocol, the USB-C2 port hits 100W, and the USB-A port goes up to 22.5W, which is ideal to use with accessories.

It has a total power budget of 160W when using all three USB-C ports — 65W + 65W + 30W — and it's a decent choice if you're like me and need to charge several devices at once. I also like that the plug is foldable; that's the case with U.S.-style blade plugs anyway, but I'm using the EU model, and it's just easier to have a plug that folds — it makes the Nexode Pro 160W just that little bit better as a travel charger.

Overall, the Nexode Pro 160W has all the features I need in a GaN charger, and the build quality combined with the extras make it a good choice if you need a new charger to use at home or on the road.

The iPhone Duo is finally official, and there's plenty of cool features in the wider-style foldable. Apple says it combined a "thoughtful design with breakthrough engineering," and that the name signifies how the foldable is basically two products in one — a phone and a tablet. The naming makes that patently clear, but it isn't the most original — Microsoft may have something to say about that.

Anyway, the iPhone Duo isn't like the usual book-style foldables, instead following a wider and shorter design that Apple says is intuitive to use. This is essentially identical to the Galaxy Z Fold 8 and the Xiaomi 18 Fold, and now that the iPhone Duo is official, I'd wager we get a lot of similar Android-based foldables that follow a similar style.

There's a 5.4-inch outer panel and a 7.6-inch inner panel, and the chassis is made out of titanium. At 5.3mm unfolded and a weight of 254g, it isn't quite as thin or light as the latest generation of Android foldables — even the Pixel 11 Pro Fold is lighter by 15g — but the iPhone Duo has IP68 dust and water resistance, and that in itself is a big deal.

What's unique with the inner panel is that Apple is using two layers of glass sandwiched together, and this ensures that the panel doesn't deform with long-term use. This is a big enough problem on foldables, and it's good to see Apple coming up with a novel solution immediately; we should see a similar system used by at least Google on the Pixel 12 Pro Fold next year. There's also a nano-texture coating on the inner panel to reduce glare, and this is bound to make a difference.

The iPhone Duo will be available in Star White and Night Sky colors, with the latter delivering a blue hue that looks great. The hinge itself is touted to have a smooth articulation and a custom torque profile, and it is designed to fold fully flat — something that took Samsung six years to get right.

The hinge stays open at various angles, and that's good to see as well as it unlocks new use cases while taking photos or viewing content on the go. You can even use the iPhone Duo as a glorified bedside clock, and I like that it has a new StandBy mode that's usable even when it isn't being charged.

There's no Face ID; instead, you get Touch ID that's baked into the power button, similar to the iPad Mini and most Android foldables. Another thing that's good is the camera on the inner panel; it's visible when you're making calls, but otherwise hidden away.

What I like is the ability to use the Apple Pencil with the iPhone Duo; that feature will come later in the year, and as someone who uses the stylus constantly, I'm excited about this.

The software in general looks great; the Liquid Glass interface switches effortlessly between the outer and inner panels, and Apple moved UI elements to a vertical position to accommodate the unique size of the iPhone Duo. The dock is located vertically, giving you better real estate when using the inner panel, and there's good multitasking features — you get split-screen multitasking similar to the iPad.

Coming to the internals, the iPhone Duo is powered by the latest A20 Pro silicon, which is built on a new 2nm node that delivers much better efficiency. It starts with 256GB of storage, going up to 2TB.

What isn't so great is the camera system; you get a 48MP main camera and a 48MP wide-angle lens, but there's no dedicated telephoto camera on the device. This was the case on the Z Fold 8 as well, and it's annoying that the lens that most of use regularly is missing on the device.

The iPhone Duo will go on pre-order starting October 16 for $1,999. Thankfully, it is getting a global launch and will be available in more than 70 countries on launch day, and heading to 28 additional regions by the end of October. What isn't great is the pricing; the iPhone Duo costs a lot more in other regions — it starts at closer to $2,700.

I've always enjoyed using Pixels, and that hasn't changed in 2026. I switched over to the Pixel 11 Pro XL from the Find X9 Ultra, and while Google doesn't have the best cameras or battery life, the 11 Pro XL is meaningfully different to its predecessor — something I realized after two weeks of use.

I have all major phone releases of 2026 on hand, but it's the Pixel 11 Pro XL that houses my SIM card. I obviously like Google's vision of Android, but the 11 Pro XL excels in a lot of other areas, so I'm outlining five reasons why the phone is now my daily driver.

There's a lot to like with the software

I'm not a big fan of AI in general, and Google's insistence of shoving AI-assisted features into every nook and cranny of its software is a bit tedious. That said, Proactive Intelligence does a good job providing contextual information, and Rambler in particular has made me use voice dictation again — I like just how easy it is to take notes. There's no doubting that the Pixel 11 Pro XL has the best on-device AI suite of any phone.

Even if you don't plan on using any of these AI features, there's a lot to like with the software. The interface is clean and modern, and you get extensive customizability when it comes to styling it to your tastes. I get that not everyone's a fan of the Material you aesthetic, but I like the vibrancy of the UI, and it's great to see Google constantly roll out new features.

The hardware is actually good

It's annoying that Google's Tensor efforts have focused so heavily on the NPU that it ignores baseline performance, but the Tensor G6 is better than previous models. It still isn't quite as fast as the latest-gen Qualcomm and MediaTek rivals, but it is better in day-to-day multitasking, and there is a noticeable difference in the overall fluidity. The G6 still struggles with visually-demanding games, but in all other scenarios, it is a pretty reliable platform.

The 6.8-inch OLED panel, on the other hand, is one of the best around. It has great colors and gets brighter than most phones I used in 2026, and it held up astonishingly well in India's punishing heat. The 11 Pro XL doesn't have high PWM dimming — unlike Chinese phones — so if you're sensitive to it, you should get the Find X9 Pro or Vivo X300 Pro.

Cameras are better than I thought

While earlier Pixels had the best cameras, that hasn't been the case for a while now. Thankfully, the Pixel 11 Pro XL makes amends in this area, and the new sensors combined with camera tuning tweaks deliver much better photos and videos.

Image quality in general is better than last year, and while the 11 Pro XL may not be as good as the Find X9 Pro or Vivo X300 Pro, it stands above the S26 Ultra and iPhone 17 Pro. I like Camera Looks a lot as it gives me plenty of flexibility in tailoring my photos.

Magic Capture in particular is a standout addition; it does a great job producing clean photos of fast-moving subjects, and I used it extensively in the last two weeks. While it isn't new, Add Me is a feature that gets a lot of usage.

Qi 2 continues to be a big deal

I only started using Qi 2 in earnest last year, and a lot of that had to do with the Pixel 10 Pro XL. I don't use cases in general, so to have Qi 2 magnets integrated into a phone body made using the tech all the more easy, and it's great to see Google continue this in the Pixel 11 Pro XL.

While 25W charging isn't a lot — particularly when there are phones that charge at 80W — the convenience is hard to counter. There are so many sleek Qi 2 power banks these days that I always have one on hand to use with the 11 Pro XL when I'm outdoors.

The battery life in general is good enough that I don't need to charge the phone before the end of the day, but if I'm shooting outdoors and need to top up the battery, this comes in handy. Also, it's just easier to plonk the 11 Pro XL on a Qi 2 charger on my desk (like the Nomos 245W) than plugging in a cable.

It's great to hold and use

I like Google's hardware design, and the Pixel 11 Pro XL looks clean and elegant. The new camera bar is modern, and it doesn't jut out too much from the body. Best of all, there's no wobble when using the 11 Pro XL on a table (take note, Samsung).

But in classic Google fashion, the brand doesn't have all colors in all storage sizes (outside the U.S., at least), so I got the 512GB variant in Obsidian. I much prefer the look of the Canyon model, and if you're considering getting the 11 Pro XL, that is the color to buy.

The phone has similar dimensions to its predecessor, but it is a little lighter, and the tweaks to the design make it easier to hold and use. Day-to-day durability is excellent; the phone took six tumbles — two onto a tiled surface — and came away unscathed.

I didn't use the Pixel 10 Pro XL as much as previous Pixels, and that's because other brands made bigger strides this year. Chinese brands have much better cameras — the Find X9 Pro, X9 Ultra, Vivo X300 Pro, and X300 Ultra are on another level — but the software wasn't anywhere as good to use as a Pixel. That isn't the case in 2026; ColorOS and OriginOS have gotten a visual makeover, and they combine a modern UI with extensive customizability and fluidity; they no longer feel like second-best software.

That's one of the reasons the Find X9 Pro and X9 Ultra became my most-used devices of 2026. Having said that, the Pixel 11 Pro XL is still better when it comes to the software, and I like that the cameras are no longer the limiting factor. I'm not saying that the phone is without issues; the battery doesn't last two days, and you don't get anywhere as much power as Chinese phones that use Qualcomm and MediaTek silicon. In spite of all that, the Pixel 11 Pro XL is a great choice if you value clean software and cameras that are fun to use.

Huawei's tri-fold Mate XT was a revelation last year; with an outward-facing hinge and a 10.2-inch panel that folds into a phone-sized 6.4 inches, it was a phenomenal showcase of foldable tech. Samsung's Galaxy Z TriFold didn't feel quite that special, but I'll admit that the inward-folding hinge came with inherent benefits.

It looks like Huawei took notes, because the manufacturer switched to a similar inward-facing hinge with the Mate XT 2 Ultimate Design, which just debuted in China. As you'd imagine, this is a costly phone; the base model with 16GB of RAM and 256GB storage costs the equivalent of $2,945, and the high-end 16GB/2TB variant comes out closer to $4,500. You can buy the Pixel 11, 11 Pro XL, 11 Pro Fold, and the Pixel Watch 5 with that cash.

The Mate XT 2 has similar dimensions as its predecessor, and it retains the same 5,600mAh silicon battery. That means an ultra-thin 4.0mm silhouette when unfolded, going up to 12.3mm while folded. At 299g, it is still an absolute unit, but it gets IP58 and IP59 dust and water resistance this time. Oh, and the purple color looks absolutely gorgeous.

The biggest difference is the inward-folding G hinge, which should do a better job protecting the inner panels. Interestingly, Huawei is using a privacy screen that's similar to what Samsung did with the Galaxy S26 Ultra, where the contents on the screen will be hidden if you're viewing it at an off-axis.

Another upgrade is the Kirin 9050 Pro, which brings a slew of tweaks to the hardware. I'll have to get my hands on the Mate XT 2 to see what's changed this year, but I like that it has the latest connectivity. The outer 120Hz panel now goes up to 6.5 inches, with the inner panel the same 10.2-inch 90Hz OLED as last generation.

Cameras have also received a boost, with the Mate XT 2 touting a new 50MP LOFIC main camera, 50MP tele lens with 3.5x optical zoom, and a 40MP wide-angle lens. The tri-fold runs HarmonyOS 7.0 out of the box, with Huawei modernizing the UI.

At this point, Huawei hasn't detailed whether the Mate XT 2 Ultimate Design will launch globally, like its predecessor. With Samsung shelving the Z TriFold, it would be a win for Huawei to bring the foldable outside China, but we'll have to wait and see if that turns out to be the case.

Google Pixel 11 vs. Motorola Edge 2026: Design

Google's phones have a distinct visual identity, and I like that the Pixel 11 doesn't deviate too much from its predecessor. Google did a good job with the color choices this year; I got the Hibiscus model, and it's just fun to hold and use.

The Edge 2026 has an immediately-recognizable design as well, but it doesn't quite feel as good to hold. A lot of that is down to the plastic chassis, but the upside is that you have IP68 and IP69K dust and water resistance as well as MIL-STD-810H durability. Google provides IP68 as standard, but Motorola has the edge in this area. Another factor to consider is the weight, and the Edge 2026 is 36g lighter than the Pixel 11.

Google Pixel 11 vs. Motorola Edge 2026: Hardware and cameras

The Pixel 11 is nearly identical to its predecessor, but the Tensor G6 platform gets a lot right, and it is noticeably faster in daily use. It still isn't good at gaming, but you'll only notice this while playing visually-demanding games. Otherwise, it is reliable.

Motorola went with MediaTek's Dimensity 7450 in the Edge 2026, and it is clearly showing its age. It has ancient Cortex A78 and A55 cores, and they're not anywhere as efficient as the newer Arm cores that you get in most other phones in this category. The result is that even though the Edge 2026 has a slightly bigger 5,000mAh battery, the Pixel 11 lasts longer in regular use.

While Motorola has the edge with 68W charging, Google's decision to put Qi 2 magnets in the Pixel 11 gives it a clear advantage in my book. It's just easy to be able to charge the device using any Qi 2 charger without needing an additional case.

Also, it's annoying that the Edge 2026 has just 128GB of storage, and there's no 256GB model either — Motorola just sells one model in the U.S. The Pixel 11 comes with 256GB of storage as standard, and there is a 512GB model if you need additional storage.

The Edge 2026 has a trio of cameras, and the dedicated tele lens is good in its own right. That said, I prefer the cameras on the Pixel 11; while the physical sensors are unchanged, Google made plenty of tweaks to the tuning, and features like Camera Looks give you a greater customizability over how your photos look. There's also the fact that the Pixel 11 takes better photos with its trio of cameras, and it holds up a lot better in low-light situations.

Google Pixel 11 vs. Motorola Edge 2026: Software

The Pixel 11 debuted with Android 17, and it comes with a clean interface with a lot of unique features you don't get on other phones. While I don't use most of the AI-assisted features that Google has to offer, things like Rambler in Gboard make a big difference.

The Edge 2026, meanwhile, launched with Android 16, and with Motorola only providing two Android OS updates, it will only go up to Android 18. By contrast, the Pixel 11 will get the Android 14 update (if Google continues its numbering scheme) seven years down the line.

Motorola's software is clean and uncluttered, but it's clear that the brand needs to do more to stand out. One thing that needs to change is software updates; it just isn't enough for a $600 phone to get two Android OS updates in 2026.

Google Pixel 11 vs. Motorola Edge 2026: Which should you buy?

The Pixel 11 is priced at $899 in the U.S., which is $300 more than the Motorola Edge 2026. While that is costlier, you are getting better features in just about every area: the Pixel 11 is faster, has higher memory and storage, lasts longer, takes much better photos, and gets five additional years of software updates, which is a huge deal.

Also, Google is known to heavily discount phones a few months after launch, so if you like the look of the Pixel 11, just wait a bit until the holiday sales start (it isn't a long wait), and you won't need to pay quite as much to get your hands on the phone.

If you're on a budget and need a mid-ranger, I'd suggest looking at the Pixel 10a instead of the Edge 2026. You don't get a tele lens, but outside of that, it is a better choice than the Edge 2026, and it costs less.

Baseus knows how to make great charging and audio accessories, and the brand is going all-out ahead of the iPhone 18 Pro launch. The Dark Cherry collection includes five products that are debuting in a bold new cherry red colorway designed to match the Dark Cherry variant of the upcoming iPhone 18 Pro.

The highlight of the new collection is the PicoGo Pro AH22, the smallest 100W GaN charger with three USB-C ports. It comes with a built-in panel that shows real-time charging details, and it is now available for $59 on Amazon.

There's also the PicoGo AM52, a 25W Qi 2.2 power bank with 10,000mAh battery that's available for $79, and the ultra-thin PicoGo Air AM71 5,000mAh power bank that costs $69. The Bose-tuned Inspire XC1 earbuds get the Dark Cherry makeover as well, and they're $149. Rounding out the list is the 100W USB-C to USB-C cable, and it costs $12.

Baseus has an exclusive deal for AC readers that is live now and runs until October 31, 2026:

• Baseus PicoGo AH22 100W GaN Charger: $39.99 with code BSAH22AC (34% off)
• Baseus PicoGo AM52 25W Qi2.2 10,000mAh Power Bank: $41.29 with code BSAM52AC (48% off)
• Baseus PicoGo Air 5,000mAh Ultra-Slim Power Bank: $41.99 with code BSAM71AC (40% off)

Baseus 100W PicoGo Pro AH22: This is the GaN charger you want

I used the PicoGo Pro AH22 as my go-to charger for the last month, and there's a lot to like. It is noticeably smaller than other 100W chargers I have on hand, and it still has three USB-C ports. The smaller size and the vibrant color makes it a great choice for travel (it's going straight into my tech bag), and I like that it has a built-in screen that shows real-time charging details, time left to charge, and what protocol a connected device is using.

It has three charging modes — Smart, Gentle, and Turbo — and the Smart mode is useful while charging several devices at once. The Gentle mode is what you need for overnight charging, and Turbo prioritizes the C1 port to 100W.

There's intelligent device recognition, and I like this feature a lot. Baseus also added a set of fun effects that show up while charging. The individual USB-C ports go up to 100W, and with all three in use, you get a 95W power budget. I used it with my Pixel 11 Pro XL, Find X9 Ultra, Galaxy Z Fold 8 Ultra, iPad Pro M4, and a few dozen accessories, and the charger did a great job.

Baseus PicoGo AM52 25W Qi2.2 10,000mAh Power Bank: Charge anything with ease

The PicoGo AM52 isn't a new product, and I've been using the power bank for the better part of a year. The Qi 2.2 tech allows it to charge phones at 25W, and it's great to use with the iPhone 17 Pro and Pixel 11 Pro XL.

There's no doubt that the cherry color looks much better than the standard grey model I've been using all this time. The 10,000mAh battery is able to charge the iPhone 17 Pro and Pixel 11 Pro XL to full, and it has a built-in USB-C cable if you need to plug in other devices, going up to 45W.

Baseus PicoGo Air AM71 5,000mAh Power Bank: The thinnest power bank

The PicoGo Air AM71 is a 5,000mAh magnetic power bank, and it is one of the thinnest I've used yet. It doesn't have 25W charging, instead using the standard Qi standard to deliver a 7.5W charge. There is a USB-C port that gets you 22.5W, and the power bank recharges at 20W.

While I'm not a huge fan of ultra-thin power banks, I will admit that the AM71 has unmatched portability. It's just 0.3 inches and weighs 105g, and is easy to slot into a bag or trousers — I have one in my tech EDC bag. The 5,000mAh battery isn't enough to charge a phone to full, but it will get your iPhone 17 Pro Max to the halfway point. This is down to energy conversion, and is true of all power banks.

Baseus Inspire XC1: Bose sound for less

I like the Inspire XC1 because of the open ear design, and they're a good choice if you have issues getting a good fit with regular buds. The cherry color makes these buds stand out a lot from the regular model, and they definitely get a lot of attention while outdoors.

The Bose-tuned sound quality is terrific, and the buds have meaningful bass along with a clean mid-range and good treble. They're pretty great with calls as well, and have LDAC and IP66 ingress protection. I get over seven hours of battery life between charges, and that's more than adequate in daily use. The only point of contention is that the cherry variant is $149, which is a sizeable increase over the $99 that the regular model costs these days.

Baseus FrostCool: A reliable 100W USB-C cable

I have a lot of these cables in the house, and they're reliable in everyday use. The cherry color is the only difference here, and other than that, it's the same cable: it can deliver a 100W charge over USB PD, is 6.6ft in length, and the braided design is built to last.

Baseus is going all-in on Dark Cherry, and I like that the brand has an entire range of accessories available in the new colorway. While there's a little bit of a wait before we know all about the iPhone 18 Pro, you can get a head-start by grabbing the accessories you need.

I like portable SSDs a lot, and I have one always on hand in my EDC tech bag. I look for two things in a portable drive: fast transfers, and long-term durability. I don't really think about the size or weight, as SSDs tend to be smaller and lighter than mechanical drives anyway.

But Lexar clearly felt like this was an area to focus on for its next SSD, the Muse. Dubbed the world's thinnest SSD, the Muse is 3.8mm at its thickest point, going down to just 1mm at the edges. Lexar says it used an "ultra-thin PCB architecture, high-density NAND stacking, and an integrated internal structure" to maximize the internal space.

The Muse has 1,050MB/s read and 1,000MB/s writes and can handle ProRes content at 4K120, which is in line with most portable SSDs. What isn't usual is the connector; instead of a regular USB-C port like every other SSD, the Muse uses a proprietary PogoPin magnetic connection, and you'll need to use the bundled cable in the box to connect the drive to your phone.

Oh, and it doesn't have the requisite magnets built-in (obviously), so you'll need to put it in a magnetic carry sleeve to attach it to a phone. Lexar notes portable SSDs can add "bulk and cable clutter," so it created the Muse to deliver a more "considered approach." It doesn't quite feel that way when you consider that you have three things to manage when using the Muse: the SSD itself, the magnetic sleeve, and the proprietary cable, which will inevitably get left behind when you're out and about.

I just don't get the need to tech industry's obsession to make products thinner. A regular-sized portable SSD doesn't have these limitations, and if anything, I like using drives like the LaCie Rugged SSD4, which are chunky but can take an absolute beating. The Muse adds a layer of complexity you don't need in a storage device, and that's before you factor in overheating. With such a small size and a sealed chassis, where does the heat go? There doesn't seem to be any room to manage the heat that builds up in a drive, so it will likely get quite hot when moving data.

Anyway, the Muse is coming out in Q4 2026, and it will be sold in 512GB and 1TB variants. Lexar didn't share pricing details, but it is bound to be on the higher side. Don't want to wait that long to get a magnetic SSD? This is the one I use.

Apple iPhone Ultra vs. Samsung Galaxy Z Fold 8: Pricing and availability

The iPhone Ultra is slated to make its debut at Apple's launch event on September 9, 2026. The foldable could cost anywhere between $2,000 to $2,500, and we'll have to wait until the event to know the official pricing. But with Apple hiking prices on most of its products in the last two months, it's a given that this year's iPhones will see price increases across the board.

Even if the iPhone Ultra is unveiled alongside the iPhone 18 Pro and Pro Max, it may not actually show up at the same time — the latest leaks point to general availability later in the year. Again, that's something we will know definitely on September 9. Given the cost, it is projected that the foldable will be available in limited quantities — much like the Galaxy Z TriFold — and it remains to be seen if it will be sold in all regions simultaneously.

Samsung unveiled the Galaxy Z Fold 8 on July 22, 2026, and the foldable retails at $1,899. This is the base model with 256GB of storage, and there's also a 512GB edition that costs $2,099 in the U.S., and a 1TB model that is $2,499.

Apple iPhone Ultra vs. Samsung Galaxy Z Fold 8: Design

The iPhone Ultra will be different to every other iPhone thus far, with the foldable design ushering in an entirely new form factor for iOS. Leaks point to the iPhone Ultra having a similar wide-and-short configuration as the Galaxy Z Fold 8, and the passport-style design is definitely intriguing — there's no wonder that other Android manufacturers are emulating a similar style.

Leaks point to a 5.5-inch cover panel and a 7.8-inch inner panel, and the iPhone Ultra could be as thin as 4.5mm while unfolded, bringing it in line with the Z Fold 8 and other Android foldables. The design looks a lot like the Pixel 11 Pro Fold, with rounded edges and a flatter profile along the hinge. While Apple introduced a bright orange color with the iPhone 17 Pro, the iPhone Ultra is said to be available in muted colors, including white and black.

Just like Android foldables, the iPhone Ultra may see Touch ID housed within the power button as the standard mode of authentication instead of Face ID. The Z Fold 8 gets a 5.5-inch cover panel and a 7.6-inch inner screen, and Samsung managed to deliver IP48 dust and water resistance.

Interestingly, one of the biggest selling points of the iPhone Ultra could be a display without anu visible crease. The Find N6 and Vivo X Fold 5 do a fabulous job in this regard — they're better than the Galaxy Z Fold 8 and Fold 8 Ultra — and with the iPhone Ultra touted to use two layers of ultra-thin glass and a liquid-metal hinge, it is entirely possible that Apple's foldable will debut with a creaseless design, outshining Samsung's Z Fold 8 in this key area.

Apple iPhone Ultra vs. Samsung Galaxy Z Fold 8: Hardware

The iPhone Ultra will see the biggest battery of any iPhone, and that in itself is exciting. Leaks point to a 4,883mAh battery, and that's similar to what's available on the Z Fold 8. That said, iOS has much better efficiency in general, so the iPhone Ultra should have better battery life, and with Apple touted to switch to a 2nm node, battery life could get an additional boost.

Wide foldables are smaller than book-style devices like the Galaxy Z Fold 8 Ultra, and as a result, Samsung just went with two cameras on the Galaxy Z Fold 8: a 50MP main camera and 50MP wide-angle lens.

The iPhone Ultra is likely to use a similar arrangement, and leaks point to two 48MP cameras, without a dedicated tele lens. We'll need to wait and see if that pans out, but as someone who uses the telephoto lens constantly, I would like to see this on the foldable.

Apple iPhone Ultra vs. Samsung Galaxy Z Fold 8: Software

Software makes a big difference on a foldable, with the added real estate ideal to multitask. This is a priority in iOS 27, and there's no doubt that the iPhone Ultra will get a lot of the same features that we've seen on Android foldables over the last two years, including a task bar, floating windows, and multitasking features.

Samsung does a good job in this area with the Galaxy Z Fold 8, and I'm interested in seeing how the iPhone Ultra will hold up against Samsung's foldable.

Apple iPhone Ultra vs. Samsung Galaxy Z Fold 8: Which should you buy?

While foldables have been around for the better part of a decade now, they're still pretty niche. That will change with the introduction of the iPhone Ultra; say what you will about Apple, but the brand has an unmatched ability to grab attention, and interest in foldables will skyrocket following the iPhone Ultra launch.

Now, whether this will translate to sales is another thing entirely, but if you're an iPhone user and wanted to switch to a foldable, you don't need to wait long to get one running iOS. While Samsung got a lot right with the Z Fold 8, it doesn't do nearly enough to convince iOS users to move to Android in any meaningful numbers.

Samsung didn't change too many things with the Galaxy Z Fold 8 Ultra, but a key area of differentiation is silicon-carbon battery tech. This is one of the reasons how Samsung managed to slot in a bigger 5,000mAh battery in the foldable while retaining a similar svelte design as the Z Fold 7. In fact, all of Samsung's latest foldables use silicon batteries, but it's the Z Fold 8 and Fold 8 Ultra where the difference is immediately noticeable. I asked Samsung a list of questions around its implementation of silicon-carbon tech, and it is interesting to see how the brand is going about integrating the tech into its latest foldables.

As a refresher, a silicon battery has a small mixture of a silicon-carbon material in the anode, leading to an increased energy density. The amount of silicon content in the anode varies by brand, and Samsung didn't share how much it is using in its foldables. To give you some context, most brands use around a mixture of 10% silicon by weight in the anode, with some — like Xiaomi's Redmi Note 17 Pro Max that has a 9,210mAh battery — going with a slightly higher 16% silicon ratio to provide greater energy density.

Why don't brands just use an anode that's entirely made out of silicon-carbon? That's because while silicon has much better energy density — ten times as much as graphite — it undergoes expansion and contraction during charging, something you don't want in a phone battery. As there is a greater risk of long-term stability or battery swelling with extended use, it is mixed with carbon to deliver a mechanically stable structure while offering better electrical conductivity.

Brands are being (justifiably) cautious of the tech, and a Samsung spokesperson said the brand "reengineering the battery system" to facilitate the use of silicon-carbon in the anode, and to ensure that the higher-density batteries it is using this year are just as safe to use as traditional lithium-ion batteries:

"On the anode side, a thin carbon coating helps manage the reactivity of silicon-carbon particles, helping mitigate sudden volume changes during charge and discharge and supporting long-term stability," said Samsung. "On the cathode side, coating and doping help maintain surface stability and structural integrity, even under higher voltage conditions."

Another thing to consider is long-term durability, and Samsung says it added "additives" to the electrolyte to "help form a protective layer on the silicon surface, reducing silicon reactivity and supporting long-term cell stability."

Samsung also made tweaks to the separator — a polymer sheet that sits between the cathode and anode — which has a "high-porosity structure" to "improve ion movement while maintaining strength and thermal stability."

What's interesting is that Samsung is using different battery architectures for its foldables. The Galaxy Z Fold 8 and Fold 8 Ultra use a "dual-path charging architecture that distributes power more efficiently across the battery system, enabling faster, more stable and reliable charging while improving heat management." This system enables 45W charging on both devices, but with the Flip 8, Samsung "separately optimized for the unique spatial and thermal requirements" of the compact foldable, so it has a battery size and charging tech that's unchanged to last year.

With Samsung just getting started with silicon-carbon batteries, it's understandable that it is playing it safe. While foldables like the Razr Fold, Vivo X Fold 5, and the Find N6 come with 6,000mAh silicon batteries, the Z Fold 8 Ultra has a much more modest 5,000mAh unit. It is still considerable progress from last year, and I'm glad to see Samsung leveraging this tech — I can't wait to see how it evolves with the Galaxy S27 next year.

As I write this, I have 78 devices connected to my home network, including phones, tablets, Windows machines, Android TVs, way too many Govee lights, and other smart home tech. The most important device, however, is my network-attached storage (NAS) system; it houses all my data, acts as my media and music server, and essentially runs my smart home.

So when it comes to selecting a new NAS, I'm exacting in my needs. I'm still using the 100TB home server I set up two years ago with the DiskStation DS1823xs+, but I wanted a new NAS solely as a media server, and there was an obvious choice: UGREEN's DXP4800 Pro.

I tested the DXP4800 Pro when it came out, and it became clear to me that it is a powerful Plex NAS. After the review, I slotted in two 24TB Seagate Exos X24 along with two 22TB IronWolf Pro NAS HDDs, and began transferring media and installing all the utilities and services I rely on every day.

How I tested the DXP4800 Pro

After three and a half months of extensive testing — totaling well over 2,500 hours of use — streaming 4K Plex content on well over a dozen devices, and writing 54TB of data to the drives, I can state with confidence that the DXP4800 Pro is the best all-round media server you can buy in 2026. I'll go into plenty of detail about how I tested the NAS over the last three months, but before I get started, here's a high-level overview of the hardware.

The DXP4800 Pro is a 4-bay NAS with the best internals in its class. It's powered by an Intel Core i3-1315U and has hardware transcoding (ideal for Plex and Jellyfin), 10 Gigabit Ethernet connectivity and a 2.5 Gigabit connection, 8GB of memory, a 128GB built-in SSD, and two NVMe M.2 SSD slots. The Intel Core i3-1315U platform is a solid choice for NAS servers, and it's no surprise that most manufacturers are using it in their enthusiast models. The DXP4800 Pro is available for $719 on Amazon, and you can also buy it on UGREEN's site.

Putting the DXP4800 Pro through its paces

I started testing the DXP4800 Pro by installing UGOS Pro, UGREEN's web-based software. It has come a long way in the last 12 months and is now at a point where you don’t feel like you’re missing out on any of the basics. After installation, I created a storage pool with the four drives; I recommend using a mirrored configuration if you’re looking to set up a NAS, as that way you’ll maintain data integrity should a drive fail. As I had this data in at least two other locations (I’m obsessive about storage), I just went with JBOD.

Then came setting up all the services I use, and this constituted the bulk of the testing. I installed Plex and Jellyfin to manage media, an instance of Roon to manage my music library, Immich to handle photos, and Tailscale to access the NAS remotely. While Jellyfin and Home Assistant are listed in UGREEN’s app store, they’re installed as containers anyway, so I just relied on Docker to install everything. It’s easier to manage, and I get better insights into how much system resources each service is using.

I prefer installing utilities like Plex and Jellyfin via Docker. I find these instances more stable, and I get the flexibility to make any configuration changes I need. On that note, the 8GB of pre-installed memory makes a big difference. Even with eight services running 24/7 within containers, I had 3.2GB of usable RAM left, with enough headroom to run a VM by allocating 2GB of memory.

That said, I subsequently installed a 16GB DRAM module, boosting the memory to 24GB and giving me much better headroom to work with VMs and other containers. Even if you don't want to go this route, know that the built-in 8GB of memory is more than adequate for most homelab hobby projects.

I took ten days to move the data to the DXP4800 Pro, transferring over 54TB in that time. I was conservative in this regard, as I didn’t want to transfer the entire dataset in one go, and I used rsync to move each category — photos, music, documents, and media — individually. A big chunk of that was my music production library that includes VST instruments and their associated media.

I connected the DS1823xs+ to the DXP4800 Pro using a 10GbE switch to take full advantage of the 10GbE connectivity available on both servers, and I was able to saturate the NAS HDDs' bandwidth quite easily. I got close to the 280MB/s maximum bandwidth of the Exos X24 and IronWolf Pro drives, and I saw aggregate transfers hit as high as 580MB/s — both NAS systems could easily handle six times that bandwidth, so this wasn't a problem at all. This was while moving bigger files; images and documents generally transferred at a much more modest average of around 120MB/s.

Thermal management can become an issue with sustained file transfers, and thankfully, it didn’t prove to be a problem on the DXP4800 Pro. The 140mm fan was effective at moving heat away from the internals, and the drives didn’t exceed 48 degrees Celsius.

What I like about Seagate's NAS HDDs is that they’re designed to run 24/7, and they come with unique features like vibration resistance, which is necessary in a NAS system.

But more than anything else, it’s long-term reliability that matters. While the drives I used in the DXP4800 Pro have now clocked just under 3,000 hours (I still count that as almost new), I've had several IronWolf Pro HDDs in the last decade that have clocked over 50,000 hours of usage, and I haven’t run into any issues with any of these drives yet (thankfully).

After the data transfer came the real test: media streaming. I used Plex predominantly, and the DXP4800 Pro delivered three high-bitrate 4K transcodes simultaneously, which is no small feat. Hardware-assisted transcoding via the built-in Intel Quick Sync platform is limited to Plex Pass users, and if you have older client devices like an early-gen iPad, this feature will come in handy.

However, most newer devices have the requisite media containers and codecs to play media files, so you don't actually need to transcode content most of the time — outside of testing how the NAS holds up in this area, I only had to rely on direct play. That said, if your video is encoded using H.265 and you have a TV or streamer that can't handle the codec, it will need to be transcoded to H.264 to play on the client device, and all of this is done automatically.

The verdict is clear

After playing dozens of hours of footage via Plex and Jellyfin over the last three months, it became clear that the DXP4800 Pro is the best 4-bay Plex NAS.

I did notice higher-than-usual power draw in general, with the NAS idling at 24—28W, going up to 60W when the drives are in use, and exceeding 85W under load. There is plenty of headroom, though, given that you get a 150W power brick, so this is not a problem as such. Averaged over three months, the power usage was well within the limits of a powerful 4-bay server, so I didn't worry about it too much.

Overall, the DXP4800 Pro is without a doubt one of the best 4-bay NAS servers around. The combination of powerful hardware and UGREEN's sensible software choices gives it a leg up over its rivals, and after extensive testing, it has consistently proven to be reliable, which is what I look for the most in a media server.

There's a decent amount of choice if you're looking to buy a foldable right now. But if you're into Google's ecosystem and are mulling a switch, you should wait until the Pixel 11 Pro Fold becomes available. Google will unveil the foldable alongside the Pixel 11 models on August 12, and the foldable should go on sale shortly thereafter.

Between the Motorola Razr Fold, Samsung's all-new Galaxy Z Fold 8 Ultra and the wide Z Fold 8, and the upcoming Pixel 11 Pro Fold, you're pretty much covered if you want a solid book-style foldable. It's a little annoying that the Find N6 and the Vivo X Fold 5 — two of my favorite foldables — aren't available in the U.S., but it's clear by now that these brands don't want to branch out into North America.

There's also the Pixel 10 Pro Fold, and I like Google's foldable quite a lot even though it doesn't take the best photos, isn't the lightest, or the fastest. It has delightful software, and I like the build quality and durability. That said, I wouldn't recommend buying one at this moment in time — Google is set to roll out decent upgrades this year to the Pixel 11 Pro Fold.

Recent leaks point to a thinner design, which is honestly something Google should have done last year itself. The rest of the industry made huge strides in this area, and even Samsung started using silicon-carbon battery tech to slot in a 5,000mAh battery in a body that's roughly the same size and weight as last year's Z Fold 7 (which had a 4,400mAh unit).

Google absolutely needs to have a noticeably-thinner and lighter foldable, and it needs better cameras. Thankfully, the leaks point to Google delivering a new main camera, so the Pixel 11 Pro Fold should take better photos out of the box. I also want to see a bigger battery, but information has been light on that — what we do know is that Google is using a brand-new Tensor G6 platform that's built on a 2nm node, so it should have better energy-efficiency, allowing the foldable to last longer.

Where Google absolutely nailed the brief with the Pixel 10 Pro Fold is with the inner and outer OLED panels. They're calibrated well, have vibrant colors, and get brighter than other foldables, and I want this to continue with this year's device. Where Google needs to do better is the crease; OPPO showcased how to make a foldable with no visible crease in the Find N6, and Samsung came mighty close to it with the Z Fold 8 Ultra, and Google now has to show how its efforts in this category have panned out over the last 12 months.

If you don't want to wait and want a foldable right now, the Galaxy Z Fold 8 Ultra would be the obvious choice. It has the best design, an extensive feature-set, and great cameras. But if you prefer Google's software and are ready to finally switch to a foldable, I'd suggest waiting until the Pixel 11 Pro Fold goes on sale — we don't have to wait too long.